Counting matching models…
Print turbine upside down to avoid sagging Before assembling, remove excess material and surface irregularities Use silicone oil (but not silicone grease) to lubricate axis. Requires running-in(like new engine). For the micro chain check…
SENA Docking Station for 50S & 30k. Others could work but I'm not sure Fot the 30k you have to put in a micro USB cable for the 50S you need a USB C cable.
Beim LMC Vivo 530 K habe ich das Problem, dass die hintere Umrissleuchte im weg ist, wenn man die Dachstangen der Wigo abstützen möchte. Ich habe das Teil in PETG mit 25% Infill als Gyroid gedruckt. Das sollte ausreichen, muss aber jeder…
The Advantages of a Dual-Extruder Setup with a Secondary Pulling Extruder A 3D printer’s extruder is a critical component responsible for feeding filament into the hotend, where it is melted and deposited layer by layer to create a print.…
Model of EMP N6964 9T 230kv Brushless Motor I use this model as a template to build a motor mount for an RC aircraft
Keycaps for a Macropad 15% infill Support structure doesn't matter Color change at layer 34 My Macropad :…
Parts for mounting an SSC30KQ IP camera to a Pavo20 frame. The parts are also designed to mount a battery on top. I included printable lens mounts: one for an M12 wide-angle lens, and one for a smaller lens taken out of a broken Runcam…
Limit sign of 30km / h Print instructions Hi, this is a 30km / h limit sign that I made for the birthday of a dear friend of mine. Behind there are 2 holes which can be used to fix it to the wall. It can be printed in its entirety with…
Simple mount for EMAX motor.
The mount is designed to use the Odrive S1 heat spreader. It aligns the motor shaft with the magnetic encoder and leaves a 1mm gap between the magnet and the encoder. A 6mm diameter an 5mm thick magnet sold in the Odrive shop is used. The…
A charging station for a Sena30k and a Sena SMH5 Just put 2 Micro USB cables inside. Ignore the Broken Antenna on the Sena30k
Držák zkumavek 3x10ks 15mm průměr do laboratoře
I bought this battery for my film equipment, and it's amazing. It is capable of multiple voltage outputs simultaniuosly. It can power my wireless mic reciever (5v), my camera, (7.5v) and my external monitor (12v) all at the same time.…
Tisk doporučuji na 0,2mm ABS, PLA nedoporučuji jelikož se láme. Válečky stačí vytlačit prstama z podpěry. Celkem 30ks, tedy na 10 sad. Rozměr: pr.5mm, délka 8mm, výška podpěry 4mm
Recently the plastic clips of my Toyota Yaris 2024 gave out, so I decided to reverse engineer them. Searching for them on the secondhand market I was stunned because they didn't sell the clips alone. They are made of a crappy PP blend…
Have Fun IF you REMIX mark as REMIXED !!
Sena 30K / 50S Halter für IKEA SKÅDIS Mit diesem 3D-gedruckten Halter lässt sich das Sena 30K Kommunikationssystem ordentlich und platzsparend an einer IKEA SKÅDIS Lochplatte aufbewahren. Der Halter wurde für das Sena 30K konstruiert und…
Motor bracket - mount for EMP N6964 9T 230kv Brushless Motor This is only a template with 1mm thick The bracket has suitable air holes for the engine for cooling You will find 2 different versions
