Counting matching models…
Originally published here: Samsung Galaxy A20 & A30 & A30s a205 a305 a307 case by tato_713 - Thingiverse This case is for the Samsung A20 phone (models started with a205), for the A20s (a207 models) look here . This case was tested on the…
Modified the size to fit the 130SLT. I'm new to telescopes, so not sure if you can just adjust the sizing on these or if there is some math that goes into the mask design spacing, but seems to work well on mine. Print Settings Printer…
This model is compatible with the lego system.
Stickplane to click together. Very tight fit with no tolerance. you can scale down the wing and tail slightly if you need some clearance. Wingspan approx. 10cm
Here's a replacement rotor head pitch linkage for a Blade 230s RC helicopter. I designed this model as a temporary replacement while I waited on a shipment of original parts. The links are a tight fit, but the ball ends are still able…
Early 30s White Guy with Scars likes his sword and being Mongolian despite being white his swords cool Wants to break down a wall created by the group of people who run this platform Was paid a dowery of a 40mm round base for his mid wife
Vase with a 1930s style to it that is designed to be a stage prop using magnets to allow it to be broken and re-assembled. Height : ~405mm or 16 inches Width : ~139mm or 5.5 inches It is designed to to work with 4x4mm round magnets at…
Blade 330s main tail drive gear, BLH1653 replacement.
This model is compatible with the lego system.
Blade 330s main gear - BLH5337 replacement.
This is my attempt at a very small case for the Femtofox Meshtastic node. More information on the Femtofox can be found here: https://github.com/femtofox/femtofox Some notes: Additional Components: N Female to IPX/UFL RG178 Cable - 10 cm…
available in two version version 1 basic version 2 easy battery swap
make a 30s1p pack for your vesc build
The BA-10 is a Soviet medium combat armored car of the 1930s. Category: Vehicles
This is a nose cone (barrel shroud) modification for the Hi-Point 995TS 9mm Luger pistol-caliber carbine rifle. It may fit the other Hi-Point rifle calibers, please comment if you find that it will. The front picatinny rail must be…
It's a tool swap system for the ender 3 v2, that works using strong 6mm magnets and a rail system. In my 4 months of using it non-stop it has never come loose or moved, the force needed to take it off the rail is a bit more than the force…
Deutsche Version: Dieses Model besteht aus diversen Einzelteilen und dient als Grundlage für die eigene Gestaltung. Je nach Vorliebe kann das Model bemalt und beklebt werden um den eigenen Wünschen zu entsprechen. Die Fensterrahmen und…
Inspired by EduGomes, who created, what I found to be a fun light size stick plane for IMAC Aresti training. I have created a EXTRA330sc stickplane for IMAC Aresti training, wingspan approx. 90mm.
I made it because there are roots and rocks in the driveway that the snow thrower got stuck in, this ski works as intended. in my case I have a Husqvarna 1130STE but I would think it would also work other older models. I printed in PETG…
Got a Mac Mini M4 and a BenQ 27 inch 5k monitor (PD2730S)? Then this is the mount for you :) Attaches the Mac Mini M4 to the back of the monitor to hide the Mac and its cables away, for a clean desktop experience. Printing instructions:…
Lenovo 530s stands Was designed to this particular model but can fit in other model of laptops (I've tested in a Dell Latitud 7700 and in Asus X510). The Gap between the hook and the circle is 12mm Hight is 45 mm. This was printed:…
30s3p cellholder for g3 with 21.5 cells Segway Ninebot g3 Max
Fits Ford Raptor 2017-2021 Lamp: https://grufmanbil.se/produkt/swelight-p-ljus-roekfaergad Designed with a very tight fit can be scaled up if needed
I have a rather niche situation where I want to use my recently-purchased Sophos XG 230 Rev 2 1U rack-mount firewall (with OPNSense installed) with my Comcast XB7 gateway in bridge mode, which has a 2.5 Gbps RJ45 network port on it. The…
I needed a powerful 5V power supply module for my Raspberry PI setup. And I found this module on Aliexpress. It advertised as 5V 5A power supply and my testes confirmed that it holds 5A just fine and keeps 5V output voltage up to 8A. It…
Hi, just a simple holder for my Phomemo label tool, to add this to my IKEA Skadis walls. Link to Label tool: Phomemo Beschriftungsgerät mit 3 Etikettenrollen, Q30S Etikettiergerät Selbstklebend Etikettendrucker Bluetooth für iOS &…
Adapter to securely attach the Ersa 30S Soldering Iron to a Wabeco Drill Station. The chamfer holds the soldering iron in place without the risk to follow gravity downwards. To make mounting easier the two pieces are hold together with…
This is a toy. With working wheels.
The cover should be printed in ABS, ASA or reinforced ABS-CF/ASA-CF. For two-part printing on a small printer (220mm bed), ABS glue (e.g. Tamiya 87137), acetone, ethyl acetate (or even nail polish remover) should be used to glue the parts…
Soportes que hice para mi tableta XP-Pen Star G430S. Son diferentes estilos que vienen en dos tamaños: uno que cubre 135 mm de la tableta y otro que cubre 90 mm. Solo probé el de las fotos, que es la versión pequeña con la parte trasera…
Stickplane to click together. Very tight fit with no tolerance. Scale down slightly if nessecary, this can interrupt optimal layerheight for color shift! I just use 2 stroke of very fine sandpaper on connecting edges, to get perfect fit.…
PET-G, 0,3mm (or 0,2mm), infill 60%
Billy Butcher Rubber Hose Style FREE STL 💀 Free one-piece version ready to print. Do you want the piece-by-piece and more detailed version? Check my ig to find the full model 🔥 (Recommended) FDM: filling - 10% -15% Support: Yes, fine tree…
A near-future 2030s apartment block featuring stacked prefabricated units with colorful panels and balconies. Inspired by modern modular housing, this design offers a clean, photorealistic PBR aesthetic with unlettered surfaces. For best…
Cast Aluminum Wear-Ever juicer from the 1930s or so has rubber feet that get stiff and crumble after 80+ years! Print 4 of these replacements in TPU, pry/scrape out the old ones and these slip right in. The insert diameter is 11 mm in…
This is a reproduction, enlarged version of a 1930s Civilian Conservation Corp Radio Operator Badge. Optimized for Wall Décor, it will look great on your office wall! See my profile for other Forest Service wall décor. The model has been…
Didn't like the text so I removed it, also made a version with vertical stripes.
A near-future 2030s cottage featuring timber walls and a roof fully covered in solar panels. Inspired by sustainable low-rise housing, this broad, low-profile design includes a small garden footprint. Print with supports enabled to ensure…
In the end it would've been easier to design from scratch but here's a 30s1p 21700 capable pint x battery box. Interior has been expanded to take advantage of negative space left both inside the box and inside the bumpers. Flat gasket for…
Old speaker covers were uncleanable. I decided to rip them off and print replacement. I used PETG to print and glued it with double-sided tape
My handheld tube side holder broke, so I made this as i couldn't find one online, hope this helps someone
Old speaker covers were uncleanable. I decided to rip them off and print replacement. I used PETG to print and glued it with double-sided tape
The BA-10 is a Soviet medium combat armored car of the 1930s. Category: Vehicles
This is a simple wedge to angle a Tapo D230S1 to point down more towards the floor It is intended to be mounted with double sided/VHB tape Additional Materials: 2x M3 heat set inserts (M3*5.7*4.6) 2x M3 10mm countersunk screws I would…
Here is a basic mount for the Tapo D230S1 doorbell. I have a door with a glass panel with a raised pattern so the included mount wouldn't work. Printed in Anycubic PETG on my Anycubic Kobra 3. Settings: Layer height: 0.2 Infill: 40%…
Der Adapter passt z.B. für Tineco A30s. Für die Variante mit Rastfunktion wird noch eine Druckfeder mit Außendurchmesser kleiner 10 mm und Innendurchmesser größer 7 mm, hier müsst ihr testen, was funktioniert, hatte hier noch eine…
This is an inlay for the Retekess T130S Charging Case. It make it easier to put the devices into the charging slot. It will be fit a bit tight. So it will do not fall off. The Inlay for the receiver is for the model T131S. The inlay for…
A replacement for the standard jog/shuttle handle. An exact replica of the original part.
This adapter plate is required to mount the JKD-4-22PF-G05BL BISS-C encoder to Mige 130st (M10010,M15015...) Motors that originally came with the bigger ABN encoder because the BISS encoder has a smaller hole spacing. Video how to mount a…
This is a pair of "J" hooks designed to let you get your precious telescope off the floor, and safely mounted to the call. It also includes 2 spacers that get the hooks off the wall so the telescope hangs better. You'll need four 3.5" or…
Larger button for the Siguro GR-K630SU Inneo portafilter attachment. A simple design – I only optimized the size. It just needs a slight push on the activation rod. It allows the portafilter handle to be inserted even when it is slightly…
Simple mounting bracket to use the built in clamp with a tripod. Tested with Diamond A430S15R, may work with other antennas if the pipe clamp mounting hardware is the same. Requires 3x 1/4" Brass Heat Set Inserts. There are 3 tripod…
I became aware of the lack of ergonomics when I started studying from home due to the covid 19 pandemic. This is one step to improve my poor neck and head posture.
You can print this model with whatever settings work best for you. There are no overhangs so just have a go at it! Prints in about 9 hours with general petg settings, but might go faster with a faster printing filament like pla.
These wheels were made to replace the deteriorated bakelite wheels on a 1920s/1930s Hoover vacuum cleaner. The part numbers are on the front, I do not know the significance of the M or the 2 digit number on the back, all were different on…
Print as oriented . This minimizes support contact Use 8mm brim. Otherwise it will fall over. Turn on Organic or Tree Supports Use 0.08mm layer height for best results and a nicer looking part. CAD Model:…
