Counting matching models…
Originally published here: Samsung Galaxy A32 5G a326 case by tato_713 - Thingiverse Thanks to Phil Nottelling , Samuel Miller and Alex Monk for testing the test version of this case. This is the test case for the Samsung A32 5G version…
This model is compatible with the lego system.
This model is compatible with the lego system.
Scaled up nexty's 18650 battery spacer to accommodate 32650 battery size. I need just a few spacers for my LiFePo4 12v pack so it make more sense (and faster) to print it than buying on ebay. The dimension of this spacer is: 35.8mm x…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a 32650 battery cell holder. This a redesign/remix from one I found on thingiverse. It uses the popular Keystone 209 contacts ( Amazon or Newark or other places) The one on Thingiverse was just a little too small for my cells that…
A simple and quick printing battery spacer for the Liitokala LiFepo4 cells. Allowed for big tolerances. Possible to print with upto 0.6mm size nozzle without a problem. The batteries i used: https://s.click.aliexpress.com/e/_9hWKUw…
Kärcher Zubehörbox Verschlusslaschen 5.326-008.0
This model is compatible with the lego system.
This model is compatible with the lego system.
Remote Control Battery Cover for Toshiba CT-90326 Remote. Definitely print with raft due to thinness of part. Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: Yes Supports: Yes Resolution: 0.2mm Layer Height…
Modified 1x1 with Studs on all sides
Case to hold 4pcs 32650 6Ah cells with screw terminal or 32700 cells with solder terminal.
This DIN-RAIL Adapter let's you mount a Mikrotik CRS326 (24-Port Desktop PoE-Switch) on a DIN-Rail. History This is Version #2 (2024-02-15) of mounting a Mikrotik CRS326 on a DIN-Rail. v1 worked, but was hard to get on the rail as the…
Print Settings: Material: PETG (VoxelPLA Pro eventually failed after 3 years on my similar model) Walls: 3mm+ Top/Bottom: 1mm+ Infill: 40%+ I couldn't find a cheap set of rack ears for my linksys switch so I designed my own. The bolt…
A snap-on case for a NodeMCU v3 that has slots for USB charging and sensor wires. Designed to fit DuPont connectors attached to the NodeMCU's pins. This was my first basic case for my DIY Home Assistant setup. I use it hold SHT3x-D…
This model is compatible with the lego system.
This is a custom-designed 3D printable bracket solution for installing the Intel Arc Pro B50 dual-slot, low-profile GPU into the highly compact and proprietary Dell Precision 3260 Compact Form Factor (CFF) workstation. The Dell…
Este es la primera version para un soporte especialmente diseñado para el Fiat nuevo Palio (2010 - 2016). Son cuatro partes, dos soportes y dos pies de apollo. Fue impreso en una Artillery Hornet. Filamento : 3Nmax PLA+ nozzel: 0,4 Capa…
Replacement part for the HVAC air duck lever (LVL) gear for GM vehicles like the Chevy Cruze. Designed after the factory part with obvious strength improvements. Print in PC MAX, ABS or PETg. Since it is to be used in a car which can be…
CAUTION: This version (v1) is deprecated: v2 is available here: https://www.printables.com/model/765733 I needed a DIN-Rail capable Network Switch, and because I really like Mikrotik and RouterOS, I just had to make my own design. I…
WIngnut for the back of the pto cover. Print with 100% infill in your choice of filament. The nut is threaded but for proper fitment run a 8mm x 1.25 tap through and then it threads perfectly.
This is just a simple case to protect the PCB of a S2/S3 charger module with the IC IP2326 from China. Offered at AliExpress as “2S 3S Typ-C USB BMS 15W 8,4V 12,6V 1,5A Lithium-Batterie-Lade-Boost-Modul”.
This design is a replacement part for the dometic fridge door. The part was not available anyware, so I designed my own. RM8XX Works on RM (S)(D) 8501, 8505, 8555
Part was missing in the Lego Mech of our son. Handy spare part.
This is a custom-designed 3D printed bracket to add a Noctua NF-A4x10 24V PWM fan into the MikroTik CSS326-24G-2S+RM Cloud Smart Switch. With this mod, I successfully reduced the operating temperature from around 70 °C down to 37 °C,…
These are caps made for the pry bar slots for the KRSC326 Roll Cart.
This is a cover for a CR2326 Light Pod from Cali Raised. I printed it in TPU.
This is a set of clips and holders for a kayak flag they were designed to fit https://www.amazon.com/gp/product/B07GBWT8YL/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1 BRILLIANCE4U Replacement Aluminum Tent Poles, Multifunction Tent…
Subaru Liftgate Bump Stop 63262 The below is from parts.subaru.com: Door Stop. Liftgate Bump Stop. Stopper Tailgate (Rear Gate). Stopper Rubber R G. Part Number: 63262AG10B Supersession(s): 63262AG10C Category: Automotive
An Extended ear that allows the CRS326-24G-2S+RM to be flipped backwards to face the inside of the rack.
Playmobil Durchbruch 30247810 Ritterburg 3268 Mauerdurchburch ersatzeil ich habs in Pla Gray gedruckt. und Super!!
Not much else to say. I didn't like the factory throat plate on my 10-326 so I designed a new one. This fits snug so it won't rattle out or spin when in use. FreeCAD file attached so you can tweak it for your saw as needed.
Replacement part for Brake Hydraulic Line Clip 13432669 . Original part is cheap but its availability here was like 1 month of waiting. Printed from ABS with 98% infill and insert from TPU. M3x16mm for hinge and M4x10 as locking screw.…
The brackets have holes for 6-7 (in each hole) of these 12mm x 3mm magnets . It will take about 48 or so magnets. The two stacks on the side that are close to one another you will want to alter the polarity so they don't oppose one…
Made up some basic intake and exhaust covers for my Briggs and Stratton 326431 16hp engine, while I was working on it forgot to take pictures of them on the engine. may suit other variants of the 326400 family nothing fancy, but if the…
LaskaKit PD-IP2326 nabíječka 2-3S 1.5A 3D model vývojové desky LaskaKit PD-IP2326 nabíječka 2-3S 1.5A Stránka produktu: https://www.laskakit.cz/laskakit-pd-ip2326-nabijecka-2-3s-1-5a/ Github:…
10Gbps SFP+ Ethernet modules can become quite hot. In my Mikrotik CSS326-24G-2S+, the Mikrotik S+RJ10 will heat up to 81 C at 10Gbps and 75 C when running at 5 Gbps. This simple clamp can be screwed to a SSD heatsink and placed over the…
I recently acquired an old Lancom network switch, practically new in box. It came with everything, except the rack mount brackets. But hey...what's a 3D printer for, right? So I made myself a bracket that fits. The overall dimensions…
ORGANIZZATORE GT326 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Arandela de seguridad generica, sin un fin especifico, en mi caso las use para sujetar una manija de alzacristales, es el mejor modelo hasta ahora. Impresora : Artillery Hornet Material : PLA+ marca: 3N3 Altura de Capa: 0.2 . Nozzel: 0.4…
Enclosure for LaskaKit PD-IP2326 nabíječka 2-3S 1.5A https://www.laskakit.cz/laskakit-pd-ip2326-nabijecka-2-3s-1-5a/ Attached .step model for remix.
Gridfinity box to house both the 13-in-1 pocket screwdriver and the 4-in-1 electronics screwdriver from Klein Tools. The fit on the screwdrivers isn't perfect, but they do rest in the pocket well. Made for the standard 42mm Gridfinity…
Dieser Ergänzungs-Felsen schließt die unschöne Lücke in dem großen dunkelgrauen Felsen der Drachenfestung 3269 von Playmobil. Diese Lücke hat mich eigentlich schon immer gestört und es war im Dioramen-Bau nicht so einfach, diese zu…
Just a simple wallmounting solution for a Rackmount style Linksys switch Print settings 0.25 layer hight 4 Preminter lines 20% Infill Cubic Fillament Spectrum Deep Black PETG @245 Nozzle temp and 90 deg bed
To save an old Winch having his plastic gear housing broken, I made a copy of the original that's is uneavailable in Europe. (Warn Winch Replacement Parts 69326) Printed in PTCG CFE10 (From Spectrum Poland Filament maker), already mounted…
my remix for USB-C 2s balance lipo charger IP2326 based on 18.5mm connectors battery holder
This model is compatible with the lego system.
Gridfinity box to house both the 13-in-1 pocket screwdriver and the 4-in-1 electronics screwdriver from Klein Tools. The fit on the screwdrivers isn't perfect, but they do rest in the pocket well. Made for the standard 42mm Gridfinity…
This model is compatible with the lego system.
A simple TV Remote for Toshiba's CT-90326. May be screwed (<=M4) or staped on a surface. Enjoy ! Print Settings Printer: SOVOL SV01 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: DEVIL DESIGN PLA Marine Category: Organization
