Linksys LGS326 Server Rack Ear
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Now you can rack mount your LGS326 Linksys Switch.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 91
- Makes
- 0
- Views
- 479
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Print Settings:
Material: PETG (VoxelPLA Pro eventually failed after 3 years on my similar model)
Walls: 3mm+
Top/Bottom: 1mm+
Infill: 40%+
I couldn't find a cheap set of rack ears for my linksys switch so I designed my own. The bolt pattern is 20x20mm which didn't match up to the Cisco rack ears I had on hand. The switch takes a total of 8 M4 machine screws. Just make sure you bump up your total wall thickness and you should be good to go.
Update 9-19-25:
After 3 years the ones I printed with Grey VoxelPLA Pro failed for my heavier Cisco 10G switch. Upon inspection, I should have made the walls nearly solid and used PETG from the start. Use PETG and make the walls nearly solid. I always leave a little bit of space in case it overextrudes a little bit it can go inside the model and not force out through the top layer or walls.