Linksys LGS326 Server Rack Ear
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Now you can rack mount your LGS326 Linksys Switch.
- Ocena
- 0 / 5
- Polubienia
- 12
- Pobrania
- 91
- Wydruki
- 0
- Wyświetlenia
- 479
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Print Settings:
Material: PETG (VoxelPLA Pro eventually failed after 3 years on my similar model)
Walls: 3mm+
Top/Bottom: 1mm+
Infill: 40%+
I couldn't find a cheap set of rack ears for my linksys switch so I designed my own. The bolt pattern is 20x20mm which didn't match up to the Cisco rack ears I had on hand. The switch takes a total of 8 M4 machine screws. Just make sure you bump up your total wall thickness and you should be good to go.
Update 9-19-25:
After 3 years the ones I printed with Grey VoxelPLA Pro failed for my heavier Cisco 10G switch. Upon inspection, I should have made the walls nearly solid and used PETG from the start. Use PETG and make the walls nearly solid. I always leave a little bit of space in case it overextrudes a little bit it can go inside the model and not force out through the top layer or walls.