Counting matching models…
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
Print approx. €11.21–€13.70 excl. taxPreliminary estimate for PETGSource material: PET
Use the stronger v4 as v3 might break. Use a flat-head screwdriver for installation. Holder/adapter for a Peli 3310 for fire department helmets Developed with a MK2.5 Be careful when inserting flashlight, use images Print instructions…
Print approx. €1.33–€1.63 excl. taxPreliminary estimate for PETGSource material: PET
maketa telefónu Nokia 3310
Print approx. €0.97–€1.18 excl. taxPreliminary estimate for one variant
I was missing this part, and although you can buy it, why not make it! Use FreeCAD. I measured one I had with calipers, printed it in PLA 0.15 quality and found the sizes didn't match. So I increased the tight sizes (i.e. now stuff fits,…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
reupload from https://www.thingiverse.com/thing:4464329
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for one variant
This is a chain which is part of the container from the 3318 playmobil container truck. There are three different parts. After assambly I melted the chain links so they cannot open anymore. The ready to use Gcodes are for Prusa MK2.5s.
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for one variant
EN : I really liked the great model from Harry's Workshop and Ben Blackburn , but unfortunately it was not fitting my knife. So I took the liberty of adapting the model to my size. Print time is reduced by almost half when printed in a…
Print approx. €0.25–€0.30 excl. taxPreliminary estimate for one variant
This 3D printed gear is meant to serve as a direct replacement for the Blind Stitch Gear in the Sears Kenmore 158.331 series of sewing machines. This was designed and tested on my own machine. If you are unable to print this gear…
Print approx. €0.51–€0.62 excl. taxPreliminary estimate for one variant
Secures the Razor Crest to the wall without requiring the set to be modified in any way. Because the top panels and canopy are not secured very well on this set, I would highly suggest hanging the set on the wall without these panels…
Case for 4S EVE 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і активний…
This model is compatible with the lego system.
This model is compatible with the lego system.
Překreslil jsem zakoupený originální klip pro LED svítilnu Peli 3315 tak, abych jej mohl vytisknout a dodat našemu spolku dobrovolných hasičů na jejich nové zásahové přilby za přijatelnější náklady. Oproti originálu jsem musel zesílit…
This model is compatible with the lego system.
This model is compatible with the lego system.
Opel Astra J and K and maybe more read compartment side trim panel/ Trunk Side Trim Retainer GM (13310144)
Case for 4S/8S Gloyuda 15ah 33140 LiFePO4 battery The case provides space for a BMC and an active balancer (if desired) BMC and balancer are mounted on double-sided adhesive tape Screw holes are 3mm У корпусі передбачено місце під БМС і…
Replacement LEGO Technic Part: 6331026 Are you missing the LEGO Technic part number 6331026 ? You're not alone! I encountered the same issue while building my LEGO Technic set, so I decided to design a 3D printable version of the missing…
A bit clip for the Makita DF331D cordless screwdriver. There is space for a belt clip on both sides of the screwdriver. If you want it for the left side you have to flip the geometry. The clip got a slot for a magnet below the bit holes,…
This model is compatible with the lego system.
This is a replacement gear for the Dyson V6 motorized brush head. There was a number on my original gear: “T103310 2B”. I do not know if that is a model number or not. It goes inside the motor assembly and connects the motor to the brush…
Compatible with: Extruder: M3313 - Micro Swiss NG™ REVO Direct Drive Extruder for Creality CR-10S Pro V2 and CR-10 Max Hotend: E3D Revo Hotend Fan: 4010 Part Cooling Fan: 4020 Blower Probe: BL-Touch 3D Printer Model: CR-10S Pro V2 CR-10…
This is a replacement handle I modeld because mine brocke. It is made for the Koenic KTO 4331 M Toaster.
Intro This adapter allows programming the OG Nokia 3310 or related (Nokia 3315, 3330, 3350, 3390, 3395 and probably others which use the same chassis). It solves two problems: The battery needs to be connected (or power needs to be…
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
A friend lost the battery cover for the remote of his LG Air Conditioner (model no. AKB73315611), so I decided to replicate the model using the other remote he has. It is better to print it in vertical or with one side in the hot bed…
Battery hold down strap for RC10 B2 and RC10 B3 2WD R/C Buggy Want More Free Designs? Like and comment. Thanks!
This is a remix that adds some more geometry to make the chain less fragile, as otherwise it might break relatively easy when printing with PLA and in heavy duty use with small kids ;)
This is the upper part hinge, to replace the acrylic tabs when they break on Technics SL-3300 turntable. Might fit other Technics turntables with tabs molded into the dustcover. Please post in the comments if you used this on another…
I wanted to design a sturdy wall mount for the Anker 331 power strip. I printed in Polymax PLA, but any material should work. The strip is inserted at an angle and pops in. The wings at the top will bend abit to accommodate the power…
This dice tower is for people who love the good old Nokia 3310 but also want a dice tower shaped like it. Its easy to hold in hands and can accept dices up to 30mm. Its an easy print in place design so you can print it as it is.
You are doing me a big favor by clicking the Like button :-) Our BHV (Company Assistance) kept losing the Nokia 3310 phone. I made a holder for it. An STL without text is also included.
A zero clearance plate for my DeWalt jigsaw, keeps the sawblade from bending to much.
A little bit changed VW 3313 tool for fuel pump timing setup. Tested on VW T4 AJT. Works perfectly Print Settings Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.2 Infill: 80% Filament: Verbatim PETG Notes: Print horizontally…
Shelf for home server series Qotom Q203* in New design (for example Qotom Q20331G9). ! Check your stand carefully before printing - tray width 228mm! For wide stands! I just received a new Qotom Q20331G9 server for my home lab. The width…
Simple Multiboard attachment for the DeWalt Jigsaw DCS331. Features: 3 x Printed Bolts included! DeWalt Colored Logo (Use glue to set it)
Clip to secure the IPEX-4/MHF4 antenna connectors used with the WisBlock Core modules RAK11162 and RAK3312 . The antenna cables used with the WisBlock Core modules RAK3312 and RAK11162 are easier to disconnect from the smaller antenna…
Fix your busted cord wrap! Short and long versions available. The picture is of the shorter version. No supports needed. Most materials should work fine. Turns out this part was discontinued. It fits my Ridgid WD16800 Wet/Dry Vac. but is…
[Updated] Added new models under Somplified folder for fast printing and less plastic. The shell stays unchanged. Check photos with black plastic to see the result. ----------------------------------- Simple case to assemble external UPS…
This is a part of the stamp from the 3318 playmobil container truck. I printed this and it was snapfit. Print instructions 2 perimeters
Wall holder for the smaller Makita cordless screwdrivers. I made it specifically for the 10.8 Volt “DF331D” screwdriver. Likely it fits also other models. As files I've included a small “countour” part, to check if the holder will fit…
The missing housing part for a Nokia 3310 modified for M17. It closes the hole around the USB-C port. More info in the modification here: https://rz01.org/m17-3310/
SCR3310 Holder w/ CHERRY ST-1144 v1.1
Dust collection does wonders. When i used jigsaw for the first time the problem was that dust from cutting would obscure view on cutting blade and made guiding tool difficult. To prevent that from happening i decided to make an adapter to…
Abdeckkappe / Schalterblende / Blinddeckel OEM 331 867 827 für : Quantum BJ: 1982 - 1988 Passat B1 BJ: 1973 - 1977 Passat32B BJ: 1982 - 1988 Santana BJ: 1982 - 2006
This gauge supports precise routing of the jig saw by displaying the cutting line for DeWalt DCS 331 and 335. Just slide the gauge beside a router (e.g. a 3030 aluminium extrusion) and it will show we're the saw will do it's job. In case…
A quick traffic wand for the pelican 3310 or 3315 flashlight. There is also a shorter version to turn your light into a small lantern for power outages or camping. Best printed in PETG if you intend to leave it in your vehicle. Use orange…
This zero-clearance insert fits the Skilsaw 3315 compound miter saw with 10 inch blade. It supports your work right up to the saw kerf for less tearout on the underside. The sacrificial section in the center of the insert is 2mm thick. I…
Summary Save valuable energy when operating the baby food warmer and keep dust away. When the cap is on, the heat is kept more reliably in the water bath and energy and water consumption is significantly reduced. We use the baby food…
Holds SCR3310 Holder (X2) with a stand for a CHERRY ST-1144
A Zack Freedman Gridfinity 1x1 mounting block suitable for the Pelican 3310 Flashlight (https://amzn.to/3J3ef2i). Tinkercad source for the model available at https://www.tinkercad.com/things/by46uo3kcdq. If the base “sticks” to your…
My modem was on the ground and I just want to wallmount it and there was no wallmount holes in the back of modem and I created this model to improve cable management.
Printed with Bambu X1, 0.20mm nozzle and 0.06mm layer height.
My version of the Toyota blank hole cover for my 23 GR Corolla. 23mmx23mm. Probably fits other models. I modified it to accommodate a toggle switch. Printed with Anycubic ABS-Like at .05mm on Elegoo Mars 3 Pro
because Ryobi batteries are such a disappointment i decided to engineer my own!
This is a replacement gear for the Dyson V6 motorized brush head. There was a number on my original gear: “T103310 4B”. I do not know if that is a model number or not. It goes inside the motor assembly and connects the motor to the brush…
I cut some things and extended the mounting hole to fit my 331T network card. Tested with PLA-CF on a Dell Optiplex. On one of the cases I tested I had to clip the end of the tab for a flush fit.
CAUTION: MAY CAUSE EYE DAMAGE OR FIRE. USE AT YOUR OWN RISK! Update 6: 12/15/2021 I printed out three parts: alternate_border6, triangle5, and alternate_border_hub_small_hole. I hadn't noticed it earlier but I found a fitment issue…
The plastic part which is pushing the soap-bag breaks easily. This is a sparepart. Beim Wepa 331100 brechen leicht die Seitenflügel des Kunststoffteiles, das auf den Seifenbeutelkopf drückt. Print instructions Category: Replacement Parts
Improved X-ACTO X3311-Compatible Knife Cap I purchased an X-ACTO X3311 because... well... I needed a knife. When I got it, I was very, very disappointed with the sheath/cover that's provided. It's very thin and very loose. Me being as…
This is a simple to print (use supports and print upside down) and mount addon for your Pro's kit SS-331. Just use a bit of double sided tape to attach it to the top of the station. Finally, you have a place to safely store the extra…
I lost mine and couldn't get a replacement, so I designed my own.
If you own the SS-331, the first thing you will do is move the powerswitch from the back to the front! This leaves an ugly and dangerous hole in the backcover. With this simple part, you can close the hole. It is a press fit so should be…
ORGANIZZATORE GT331 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Successful installation when printed using 95A TPU with 1 wall loop, 3 top and 3 bottom shell layers.
I'd be surprised if anyone else needs this specific part, but if you do, here it is. The bezel on my slow cooker got brittle and broke off, so I modeled a new one in Blender. Blender file is included. Print Settings Printer Brand:…
This is a 1-piece replacement for the original Fisher And Paykel button support used in models DW60OUC2X, DW60OUC6X, DW60OUC6B.DW60OUC2X, DW60OUC6X, DW60OUC6B. Click here for instructions on how to replace it .
sneak this stl in you favorite slicer, no fine tuning tolerances (0.5 gap), print in place. made during a formation by @round3D organisated by @leForem
Summary Round-to-round cone adapter that connects the Ridgid R4331 13-Inch Thickness Planer OEM dust port piece to a standard 4" dust collection hose. Simple straight cone design — the OEM adapter slides into one end, your 4" flex hose…
Replacement battery cover for the Oregon Scientific TW331 timer. This model has built-in custom supports to get the right tolerances on the tiny fins. After printing remove the supports with a sharp blade. Print at 0.2 layers with a 0.4…
Made this since I didn't stop to think about how to get the 33140s I ordered actually connected since I couldn't tack weld onto the copper terminals, ended up putting this together in Orca using Overture 95A TPU to make bushings to hold…
I needed a way to keep my SCR3310 off my desktop but accessible when needed. Since I have a USB hub mounted to my desk, I thought a magnetic holder would be an easy win. I found the source model and adjusted so I can hold my reader in a…
Copper Terminal LiFePO4 33140 cells can be found somewhat cheaply online but they have very obvious issue for the DIYer - the copper bus on the positive terminal is <2mm tall and can easily be shorted against the cell body. These caps are…
Piece was missing when i got the unit
The TMx31 series amateur radio transceivers use a plastic bracket mounted above the PC board to hold the speaker in position against the grille in the top panel. These transceivers are getting a bit long in the tooth, and there are a…
Wiha 331 Halter für Skadis Wand. Für die Befestigung wird die 2,5mm T-Nut benötigt.
Angled bracket for board mounting No screws required No supports required during printing
This is a cap for the T-piece for spray nozzles from Gardena
A Bumper case for the Fairphone 4 with Nokia 3310 looks
Replacement side brackets for a Liebherr refrigerator door shelf. I modeled these from the original bracket marked H7427335 / H7427331 and made both left and right versions. The brackets hold the existing glass shelf and metal rails and…
It is a common issue, that the rubber stop for the rear seats gets worn out and it leads to slack in the latch. You cannot buy the rubber stop anymore, so I designed it in CAD for you to print in TPU. The replacement part number is…
This cable holder replaces the BMW OEM clip 33 18 1 181 218 (33181181218). It routes and secures wiring on the suspension—typically the brake pad wear sensor at the rear, and in some models also ABS/signal wires—so cables don’t chafe or…
The TMx31 series amateur radio transceivers use a plastic bracket mounted above the PC board to hold the speaker in position against the grille in the top panel. These transceivers are getting a bit long in the tooth, and there are a…
because Ryobi batteries are such a disappointment i decided to engineer my own!
This is a cap for the T-piece for spray nozzles from Gardena
This model is compatible with the lego system.
Improved X-ACTO X3311-Compatible Knife Cap I purchased an X-ACTO X3311 because... well... I needed a knife. When I got it, I was very, very disappointed with the sheath/cover that's provided. It's very thin and very loose. Me being as…
My version of the Toyota blank hole cover for my 23 GR Corolla. 23mmx23mm. Probably fits other models. I modified it to accommodate a toggle switch. Printed with Anycubic ABS-Like at .05mm on Elegoo Mars 3 Pro
This is a basic wall mount for a DeWalt jigsaw (DCS331). Its designed to be quite snug so that the tool doesn't slid out if you want to mount it under a shelf. I printed it with 6 perimeters and %40 infill as I wasn't sure how strong it…
Překreslil jsem zakoupený originální klip pro LED svítilnu Peli 3315 tak, abych jej mohl vytisknout a dodat našemu spolku dobrovolných hasičů na jejich nové zásahové přilby za přijatelnější náklady. Oproti originálu jsem musel zesílit…
![M3313 CR-10S Pro V2 / CR-10 Max [Micro Swiss NG REVO Extruder] - Fan Shroud and Probe Bracket](https://media.printables.com/media/prints/837537/images/6451803_5213a1a3-439d-4693-8579-b0e2f4eef1d6_6586a5bd-5a76-445a-ad1f-8cdcec2938fb/imagea.png)
