69 models
I'm switching to a standing desk and bought a mount to hold my monitor and other accessories off the table. I either threw away the original adapter or my monitor didn't come with it, so I searched online for options to purchase. The only…
Print approx. €6.36–€7.78 excl. taxPreliminary estimate for one variant
Propeller spinner cap 59mm for popular RC EPO aircraft SBACH 342 50E in equal scale with side bolts mounting. No supports needed. For 6mm shaft Equal scale blueprints in .ai .cdr format If you like it, please support me: Paypal:…
Print approx. €0.55–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
EN: The HAZET 810R bit or Inbus Flow 73424 bit ratched screwdrivers are some of the best screwdrivers with a silent and stepless ratchet. Nevertheless, I almost didn't buy the HAZET 810R because it doesn't have the very practical twirler…
Print approx. €0.81–€0.99 excl. taxPreliminary estimate for PETGSource material: PET
SBACH 342 EPO RC airplane repair kit for rudder mounting rudder mount for 12x16mm hinges back wheel steer base For 12x16 mm hinges If you like it, please support me: Paypal: [email protected] Skrill: [email protected] ★…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
I tried to model cup. But you can use it however you like I look forward to your makes Happy printing!
Print approx. €2.16–€2.64 excl. taxPreliminary estimate for PETGSource material: PET
🛠 ISO 2342 Headless Screws These printable headless screws follow the ISO 2342 standard — perfect for alignment and positioning tasks. Designed without a head, they’re ideal for clean, flush-fit applications. 🖨 Recommended Print Settings:…
Hier ist der rote Kragen für den OBD-Stecker eines Hella Gutmann Mega Macs 50. Der rote Kragen des ST2-Kabels (342509) auf der Seite des OBD-Steckers bricht gerne ab, daher gibt es hier die STL als Ersatz. Das Teil wurde leicht angepasst,…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Due to its odd triangular profile, a webcam will not sit well atop the Alienware AW3420DW. This is a simple mount that provides a mounting surface. This was designed to fit the mount used by the logitech brio, 920, 922, 925, 930 and any…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
This model is compatible with the lego system.
This is a quick Tinkercad design to solve the issue of the Logitech Brio 4K Camera mount covering a small amount of the top of the Alienware AW3423DW OLED Gaming Monitor. I used Prusa PETG in Black. Pictures are in draft mode but works…
This model is compatible with the lego system.
I captured this at The Ashmolean Museum using 123D Catch and my iPhone 5S. Marble portrait of the Greek Playwright Menander (342-291 BC). Frequently copied in the Roman period. Bust and much of face: 1600-1750, Head: Roman, AD 1-200 after…
This is CAD dummy modell of a DC Motor often labelled XD-3420. It comes in 12V and 24V versions, and is rated at 30 W and ca 2.5 A (yes, for both voltages. -- so probably the Wattage is only correct for the 12V version) Body Diameter: 51…
Elevate your coffee-making experience with this custom-designed Portafilter Hanger, perfectly tailored for the 51mm portafilter of the DeLonghi ECP3420 (and similar) espresso machine. Key Features: Perfect Fit : Designed specifically for…
This is the car part number 735373420 Print instructions Category: Automotive Print Settings Printer Brand: MK3 Printer: Prusa i3 Rafts: No Supports: No Resolution: 0.2 Infill: 40 Filament: Prusa PETG Black
Since the monitor housing on the back is so thick, the clamp of the light bar won't fit. This adapter raises the height of the lamp so the weighted part of the clamp can sit on the back of the housing. The file can also easily be modified…
My 34" Alienware Monitor was to thick to handle the stock mounting solution for the Mi Monitor Lamp. I tried some solutions here on printables.com and thingiverse but none really worked and kept the angle of the lamp like its supposed to…
Don't throw away your YardWorks grass trimmer, print a replacement head for it! For model 060-2342-0. Recommended to be printed in PETG, ABS or PC. No supports are needed.
A Brio 100 raiser for DELL monitor P3421W, so that it will not block part of thin bezel creating a notch. See pictures. Print with left side or right side (the t shape side) facing down so you will not need any support. The original…
I made this mount so I could use Command strips to secure the NUC under my desk without having to remove the rubber feet. This mount is designed fasten to your NUC using two M3 x 8mm socket cap screws on the bottom. I've included the .f3d…
Mitutoyo 342-351-30 0-1" Point Micrometer Gridfinity Bin
Einfach aus Flex drucken. Viel Spaß damit. ;)
This mount uses the cable hole in the back of the monitor as a mount point to manage the weight of the Tobii Eye Tracker. It also leaves a whole for the control stick, and the USB ports. Print long side flat on the bed separately, glue…
Piece with the same measurements as IKEA 10046342 to be used on the back of ENHET furniture
Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…
Mount for expansion board for BBC micro:bit IoT - ElecFreaks EF03426. Wi-fi module for BBC micro. Printing without support.
The little acrylic (?) box that holds the lightswitch on Pfaff Hobby 301-420 sewing machines becomes brittle over time and easily breaks away at the screws. This is a replacement for the whole box, albeit I only tested and used the bottom…
The Abloy 362, especially with a Protec2 core, is one of the most unpickable padlocks made, with no one having been able to pick one on video, even with special $300 tools. With its 15mm shackle, it cannot be cut with bolt cutters. If you…
Verze 2 - drobná úprava oproti tvaru, který je vidět na obrázku z tisku. Lépe sedí na monitoru. PLA/PETG 4 perimetry, 25% infill
A remix of https://www.printables.com/model/763578-quntis-screen-bar-extention-for-curved-monitor for my Dell S3422DWG monitor. It maintains the bar out the screen pixel zone and also slightly bring forward the bar so it wont touch the…
Headless Screw ISO2342 M6/M8/M10 Various Lenghts
MADE IN TINKERCAD ONLY Infill-100%-20%(if you only have a little bit of filament) supports-tree (ONLY ON THE TOP CAP)
Moulding retainer clip for Chrysler 1974-78. Mopar Part #6003424 (96322 WD 3). Original designer: Chrysler Co., Detroit MI USA. Available in NOS, please support retailers. Print in PETG! Two limbs on the bottom need to flex considerably…
If you have a xd motor like me this is a remodeled one i kept these for my self but here you go STH-10 GE MOTOR COVER IS IN MY PROFILE
Gridfinity tray for the INBUS® Flow 73424 screwdriver. Sits a bit tight, but works for me. Also lost the CAD model and I'm to lazy to re-design it.
Amazon product ID was B08F9X1Q4J with the godawful title of “Delippo 240W 20V 12A Laptop Ac Adapter for ASUS ADP-240EB B Rog Zephyrus Duo 15 GX550LXS RTX2080 rog GX550LWS-HC099T i7-10875H rtx2070” It's almost certainly a re-badge of…
In addition to the DFrobot board, expansions can be installed in this housing. The board dimensions for the first and second mounting levels are also available for download. More information and electronics design at: http://www.averon.pl
I changed the design of TJDesign's “Wera 30” mount to fit the INBUS Flow 73424 screwdriver. The hook is unchanged from the remix of septillion's remix, because i liked it more than the original.
Produktbeschreibung Diese speziell entwickelte PLA-Halterung ermöglicht die stabile Befestigung der Dell AC511 Soundbar an einem Dell S3422DWG Curved Gaming Monitor. Der maßgeschneiderte Adapter überbrückt die Kompatibilitätslücke…
my beeper was tighten with zip tie, but I designed an holder to attache it with the 2 screws placed in front of frame. probably heavier than Zip tie, but also less jerky. Print Settings Printer Brand: Sovol 3D Printer: Sovol SV01PRO…
A simple cover the camera that sits atop the Dell P3424WEB monitor. Prints without supports.
Printed with a higher than usual amount of walls for structural stability. I've been using this for a little over a year now with no noticeable warping due to the weight
I was looking for a curved led light for my curved monitor. but this dell c3422we's curve ratio is different to other gaming monitor. so I designed this led railto mount led strip in it. the led strip is the same one I used on my ender 3…
The Xiaomi light bar cannot be adapted to the screen due to its thickness. The top of the screen is very thin and the electronic housing of the screen is too thick. This adapter raises the light bar so that the weighted part of the clamp…
ORGANIZZATORE GT342 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
I often find I never have an oversized Pirate Ninja Star when I need one. And if you print this Kenmore Freezer Drain Screen (which replaces Kenmore part number 253.23429100) at, like, 250% or larger, you will, indeed, have yourself a…
Created because I was mounting my MAG342CQ. The VESA 75 plate needed a spacer, otherwise you could bend the plate or break the plastic in the monitor due to flex.
I got tired of these tools rolling around and getting out of order, so I designed a simple tool holder to keep them organized. Note that there may be many variations of these tools, and this holder is dimensioned only for SKU 93424. YMMV…
A hinged camera cover for the Hikvision facial recognition camera model DS-K1T342DWX. Created because one of our cameras is pointed straight at one of our technician's desk, and no one likes being watched like that. This cover, though not…
Print this x2 with supports and add it to thing:3421762. Designed to match the curvature and angles of the nuts using fusion360. will allow supporting of larger diameter spools. I specifically printed this spool holder as it is the most…
This is a simple adapter designed to make the Xiaomi Mi Monitor Light Bar fit securely on the Dell U3423WE ultrawide monitor. The original light bar mount doesn’t sit properly on the curved/thicker top edge of the Dell, so this adapter…
Remixed from another bungee made for a samsung monitor. Adjusted the cable channel larger to fit my mouse cable better. Included the step file for easy remix to other monitors. OrcaSlicer can convert it automatically and slice it. Don't…
An XD-3420 Motor Tolerance tester. 8mm to 8.25mm
I designed this to make use of the otherwise unused soundbar mounting area on the Dell P3424WE 34" Curved USB-C Hub Monitor . The mount attaches to the monitor's soundbar mounting points and holds a CYD display in a compact, easily…
The Quntis monitor light bar won't sit properly on the Dell UltraSharp U3425WE because of the monitor's curved back. This adapter clips over the monitor's top edge and gives the light bar a flat surface with slots for its clamp to lock…
Don't throw away your YardWorks grass trimmer, print a replacement head for it! For model 060-2342-0. Recommended to be printed in PETG, ABS or PC. No supports are needed.
The Xiaomi light bar cannot be adapted to the screen due to its thickness. The top of the screen is very thin and the electronic housing of the screen is too thick. This adapter raises the light bar so that the weighted part of the clamp…
Printed with a higher than usual amount of walls for structural stability. I've been using this for a little over a year now with no noticeable warping due to the weight
A hinged camera cover for the Hikvision facial recognition camera model DS-K1T342DWX. Created because one of our cameras is pointed straight at one of our technician's desk, and no one likes being watched like that. This cover, though not…
Moulding retainer clip for Chrysler 1974-78. Mopar Part #6003424 (96322 WD 3). Original designer: Chrysler Co., Detroit MI USA. Available in NOS, please support retailers. Print in PETG! Two limbs on the bottom need to flex considerably…
Yamaha YLM342SE Rasenmäher Abdeckung Griff Rechts Drucken, kommentieren, liken, bewerten.
Yamaha YLM342SE Rasenmäher Abdeckung Griff Links Drucken, kommentieren, liken, bewerten.
We present our own custom design of a remote-controlled aircraft, inspired by the legendary Sbach 300 aerobatic plane. The model was 3D printed using LW-PLA, then painted and decorated with Red Bull stickers for aesthetic purposes only.…
