Lego Compatible (3460.dat) Plate 1 x 8
This model is compatible with the lego system.
- Downloads
- 852
- Likes
- 26
- Rating
- 5
41 models
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Based on Danol's great design, I've remixed his dock to fit the Anker A8346 version that doesn't have an Ethernet port and does have a power LED, an additional USB-C and the two USB-A ports that are no longer centered and I had to move…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Print MK3.5_0,2mm structural Prusament PETG infil 0% perimeter 6 (pipe 12mm) perimeter 7(pipe 14mm) Ironing:ON
EDIT: added HDMI 90 and 270 degree adapter and a working EDID emulator, which forces 1080p60 so the 4k30 dock is delivering 60fps just fine Due to buildplate dimensions and not really needing the whole width (and height) of the original I…
CZ: Držák kamery na plotový sloupek. Designováno na průměr sloupku 50mm, ale bude pasovat i na jiné. Držák upevněte na sloupek v orientaci kamerou dolů a držák upevněte dvěmi nerezovými stahovacími pásky (typ W4 - celonerez, W2 - nerezový…
DESIGN DOES NOT SUPPORT CASES Converts the Anker 341 (A8346) USB-C Hub into a fully enclosed Steam Deck Dock. V2 Design means new snap design and no more screws needed. Tolerances were made for printing at 0.3mm layer height. IMPORTANT!…
never want to hunt down the peppercorns you spilled in your kitchen again? all measurements in mm fits perfectly for Peugeot 23461
I created this cover for the mount of my Garmin Zumo 396, so I it would look a little bit better, when I haven't mounted the GPS Unit. Also this should somewhat protect the mount. I would still recommend removing the cover after heavy…
A headset hook for monitors with a very curvy back of the monitor. The IIyama G-Master GB3466WQSU has this. It's not perfect so please feel free to adjust further But good enough ;-)
Replacement zero clearance insert plate for Ryobi TS1346 miter saw Recommend printing solid with a higher temp material May also fit other models of saw. Step file included so you can modify to fit yours if it is slightly different
Get the original here: https://www.printables.com/model/4853-cylinder-basic-geometric-shape
Replacement for the Playmobil cannon's wheels/axis. The axis is appr. 41 mm long (incl. hub) with a wheel diameter of appr. 14 mm. Original part numbers are 30030600 and 30063460 - depending on the color. In the original design, there is…
Front and back pieces should fit together snugly and remain in place with/without glue.
This is a snap on extension for the Perky-Pet YSSF00346-2 Straight-Sided Thistle Seed Wire Mesh Tube Finch Bird Feeder. I wanted to raise the lip on the bottom a bit so that the seed didn’t fall out so easily when the goldfinches flew…
The telescopic wand lock on my Miele S3461 (~20 years old) failed due to broken and missing internal parts . The outer components (button, cover, spring) are still available, but the internal locking mechanism isn’t sold anywhere —and I…
Hex Filter Cage for Milwaukee M18 VC2 / Filter 4933464029 Drop-fit hex cage designed to protect the Milwaukee M18 VC2 vacuum filter. Prevents large debris from sticking to the filter surface. Optional mesh filter can be mounted over the…
Remixception of a SlavaSlenin's remix of the original Anker SteamDeck Dock by Danol . Modified to fit my SteamDeck inside a Spigen case, but it might work with some other thinner cases. Print process was a bit of trial and error, despite…
This model allows for the mounting of the Bticino 346833 module on a DIN rail, available in both "horizontal" and "vertical" orientations. The 3D-printable design can be easily printed in PLA without issues. The vertical version requires…
ORGANIZZATORE GT346 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
Presento el PEGOT-E (73468-V3) , mi proyecto de robot social interactivo. Diseñado íntegramente en SketchUp y fabricado mediante impresión 3D , este robot combina hardware accesible con un comportamiento dinámico y autónomo. Su estructura…
I printed the newest version of the dock enclosure top from the original maker, and found that it no longer matched the remix. The original maker has modified the model to use clips instead of screws, so this is a modified base part that…
Ford D5NN34673A (D5NN-34673-A) 100-series tractor, steering column trim. Made this for 1979 4600 with Q-cab, but likely to fit many others. Printed in PETG. Holes might need some adjustment, but fortunately they will be hidden.
A cap to fill in the hole on the sides of the multimeter's plastic case if the handle has been removed. Printed in 2 parts to reduce support mess. Clear the support from inside the 4 holes and any stray printing artifacts. Press fit…
This is a two-piece replacement component for the lighting of a DPE 5960M hood. Specifically, it addresses the AEG - 140183468069 lighting. The plastic cover that clips onto the LED frame was broken. I designed it as a makeshift fix for a…
Made an baffle for the TP-Link TG-3468 to put it into a m720q tiny
BabyDan Flex/Olaf Safety Gate wall fittings, black Lost the wall fittings for your black BabyDan Flex/Olaf safety gate? No worries! I got you covered. As the piece is too long and i have a Prusa mini, the design is to print 2 parts per…
This 3D printed delete plate for replacing the OEM switch plates with a plain plate. Printed with ASA, reusing same OEM fasteners.
A mount, that centres the sensor of the DAVIS346 event camera, pair with some wing nuts and rails for experimentation.
Parametric 7.8cm tall object with rounded circular geometry and a waves pattern. Engineered for precise 3D printing.
philips-massive-33466-17-40-propojovaci-zasuvkovy-dil
This improves on the original part by allowing the tightening screw to run in a metal nut instead of straight into the plastic, increasing strength and avoiding one of the sources of the cracking that happens to the original piece.…
The telescopic wand lock on my Miele S3461 (~20 years old) failed due to broken and missing internal parts . The outer components (button, cover, spring) are still available, but the internal locking mechanism isn’t sold anywhere —and I…
Presento el PEGOT-E (73468-V3) , mi proyecto de robot social interactivo. Diseñado íntegramente en SketchUp y fabricado mediante impresión 3D , este robot combina hardware accesible con un comportamiento dinámico y autónomo. Su estructura…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…