Counting matching models…
Collection of Gridfinity basic cups height 5 (39mm), over 2500 STLs all common variations. Using the Gridfinity Extended OpenSCAD script . I have generated STLs for bins of all common configurations (over 2500 configurations per height).…
The 5.45x39mm cartridge is a rimless bottlenecked intermediate cartridge that was introduced into service in 1974 by the Soviet Union for use with the new AK-74 rifle. The 5.45x39mm supplemented and then largely replaced the 7.62x39mm…
Go ahead and divide 39 mm by your desired size and use that number as the size modifier to get a buckle of your desired size. Make sure to print with the flat side down and the tab facing up.
FDM -> It is recommended to use a layer height below 0.15 for printing. It is recommended to use LCD or SLA for printing to obtain higher precision. "A series of high-precision bullet models." In order to meet the needs of military…
7.62x39mm, also known as 7.62 Soviet or 7.62 AK, is a centerfire rifle cartridge designed in Russia by a group led by N.M. Elizarov in 1943. Print this for props, display, education, training, just because it's cool, or scale it up to…
30 RND - ISH, I HAVE NOT CONFIRMED I AM GOING TO ADD 20 A RND MAGAZINE, IF I CAN FIND MY REAL ONE (HEHEHE). I HAVE ALSO ADDED A VERSION WHERE YOU CAN BOLT IT TOGETHER SO YOU WONT HAVE TO TRY TO CLEAN OUT ALL THE SUPPORTS FROM THE PRINT.…
I have designed this clip for the new 2021 Festool vacuum hose. It is custom-made for the new diameter.
The 7.62x39mm round is a rimless bottlenecked intermediate cartridge of Soviet origin that was designed in 1943 and remained the Soviet standard until the 1970s. The cartridge is still widely used due to the worldwide proliferation of…
Needed a mockup of a NEMA motor for testing a mount, but mine were 39mm, not 34mm, so I modified into this version from the one found at https://www.thingiverse.com/thing:207705 Category: 3D Printers
7.62X39mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Hab meine Spardose aus Kinderheitstagen wieder gefunden und wollte diese öffnen, habe an Hand von Bildern aus dem Netz den Schlüssel nachgezeichnet und gedruckt. Teile ihn jetzt hier falls es jemandem genauso ergeht :)
This is a step up ring that adapts 39mm lens filter threads to 58mm. The TTArtisan AF 27mm f/2.8 uses the odd 39mm thread, and I wasn't willing to hunt down and buy another CPL filter, so I want ahead and designed my own. This is printed…
Hood mount protector ring for Voigtlander 35mm F1.5 Nokton Leica M mount lens. This protector ring is providing following features: completely covering shiny chrome ring making lens all black and more discrete protecting hood mount petals…
A handy ring that adapts 43mm, 46mm and 49mm threads down (or up) to 39mm, designed to fit the Alum Panomicron setup. It prints well with a 0.4mm nozzle at 0.12mm layer height, providing clean threads and a snug fit. Ideal for switching…
5.45X39mm stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
A little support is necessary, even if the pot and feet are printed separately. However, both parts must be glued together. A model has also been added where everything is in one piece, support is required here, too.
This is a square lens hood made for 39mm filter thread, designed for roughly the field of view of a 35mm f/2 lens whose front element fits inside of 39mm filter threads. This was developed specifically for the Voigtlander 35mm f/2 Ultron…
Two different sized corrugated plate static mixers designed for use in 1-1/2" SCH40 PVC pipe. Category: DIY
scopecaps what else you wanna know? caps are friction-fit on and uses M2x20mm rods as hinges. Alternatively you can use spare filament if you're that cheap.
39mm plugs w/ a sigil of lucifer inlaid. Printed in PLA at .08 layer height.
Recently I repaired the rubber band of a vacuum cleaner hose holder (see https://www.printables.com/model/238227-vacuum-cleaner-hose-hanger-with-flexible-jaws-for- ) and decided to design and 3D print a new one for a tube with +/-39mm…
7.62X39mm Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
This model is a variation of my other models. It's purpose is to exercise interesting design and function. It is printed in place, in plain that gives it most strength. It is foldable, to make the final piece, and it snap fits to hold…
pip 2way valve for vacumhose 39mmOD vacum cleaner is connectd from below, selector on top indicates flow direction
I have been playing with alternatives to normal poker chip racks. The normal poker chip for almost all casinos and home games is 39mm diameter. These racks fit six stacks of 30 chips for 180 per rack. However, they sit upright rather than…
Dose zum Schrauben für Fotofilter mit 37 mm Gewindedurchmesser bzw Nikon Filter mit 39 mm Durchmesser. Die Dose hat innen einen Durchmesser von 42 mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden…
Filling 100% Layer thickness 0.25 Material PETG Nozzle 0.4
Tube for 9 silver coins in 39mm capsules for silverstaker Filament-PLA https://buymeacoffee.com/gttelewizortv
Silver 1oz coin 39mm capsel stacker 6 pieces Filament-PLA https://buymeacoffee.com/gttelewizortv
I own a Meopta Flexaret Va camera. This camera takes push on filters. I just have a yellow one and a close up adapters. On my rangefinder camera, I use a Leica Thread Mount Voigtländer Color Skopar 35mm 2.5 lens that takes 39mm filters. I…
Záslepka proti úniku vody přes skimmer při vypnuté filtraci.
I made these because I wanted a quick solution for adding / changing designs in plugs, so these have a 3mm recessed area. They are currently sized for 39mm lobes with a vey minor (.5mm) saddle area. Easy way to add your own design is to…
I created this adapter for my 27/2.8 Ttartisan lens, because i had 52mm filter and ttartisan filter ring diameter is 39mm. I hope this will be helpfull for you guys. Printed on Creality K1C, Creality Hyper PLA filament.
Printed in PETG
EN: A device with hooks and a tray where objects can be placed, that is easy to attach to mounted parasols with a stand up to 39 mm, using a snap-on mechanism. Can be easily fixed in the desired position with 2 screws and, thanks to the…
Einfache Schachtel mit Deckel für die Nikon 39mm Filter welche als Hinterlinsenfilter bei den Spiegelobjektiven oder für die Filterschubladen bei den Teleobjektiven verwendet werden. Gedruckt mit PLA ohne besondere Einstellungen.…
De vere lens board 39mm hole. The file "tight fit" is to be used if you haven't got a nut. You can file it carefully and screw the lens tight, maybe use some thread lock. The other file should give enough space for the lens to move in…
39mm to 43mm step up ring/adapter with finger tabs for leverage Print with .08mm layer height or lower. Recommended supports in this orientation: For support settings I like to use 3 top interface layers, .22mm Z distance, 0mm top…
Holder for Nivea Deodorant rollers (for Nivea 39mm diameter bottles). No need for supports.
The extension doubles as a receiver box (fits only compact receivers), to provide limited splash resistance and neater cable management. I uploaded stp file, so you can easily make your own wheelbase.
I have been playing with alternatives to normal poker chip racks. The normal poker chip for almost all casinos and home games is 39mm diameter. These racks fit four stacks of 25 chips for 100 per rack. However, they sit upright rather…
funnel to refill spices in glasses with opening diameter 39mm Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: eryone PLA white Category: Kitchen & Dining
My fat cat toppled the cat tree and broke one of the pillars, this is a quick fix, this works on 39mm pillars. I use M5 bolts with a nut since MDF wood doesn't play nice with wood screws.
BN-880 GPS mount for my Eachine Cvatar. Very light weight. Printing in TPU is preferred, but PETG also works well on this design. PLA might also work, but I have not tried. Supports are needed due to the central overhang. Hole Spacing for…
a good fastener for 1" hydraulic tubes bolts down with 2 m8 bolts.
I've created two models; Movement bracket to hold the Miyota 2115 found in the Casio Duro MDV-106 and MDV-107 Chapter ring insert to fill the void when using the original Duro chapter ring Important: Please install the movement bracket…
Kyoshin Elle Craftsha 8667 leather tool skiver gridfinity organizer. I added some buffer to the uploaded version, the on
This is an EF-M to 39mm screw-mount adapter for M39 SLR lenses , commonly found on early Zenit-style Soviet lenses. Tested with an Industar-50 50mm f/3.5 M39 SLR lens on a Canon EOS M body. This is not for Leica Thread Mount / L39…
This is a replacement 90-degree elbow (knee) pipe designed for home swimming pools. It serves as the inlet/return jet part where the clean, filtered water flows back into the pool from the filtration system. It features a precise 39mm…
I create for my son this Box because he love Minecraft it need long time to create and optimized first box need glue
Got an order for clamps to use while dissassembling motorcycle struts on a vice. These are simple but work. Print them heavy if you plan to use the more than once.
Remixed to hold three .4 nozzles & put a Gridfinity base on it with a 39mm base to fit in the CC3D Projects DRWRCC Poop Drawer Riser with Gridfnity drawer. Also rounded the corners Added filed with .4 labels
A direct, functional conical adapter designed to bridge the gap between circular saw dust extraction ports and standard shop vacuum / dust extractor hoses. The tapered geometry relies on a tight friction fit (interference fit),…
I designed this model to be a superior alternative to the factory caps and keeper that originally came with Jupiter-12. This model upcycles a cap from P&G laundry detergent such as Tide/Aerial/Gain. You'll need one of the new style caps…
This is two versions of a poker chip tray that is easy to print with no support by printing it on its side. Put the flat parts against the bed and both sides will have the texture of the build plate. The two parts snap together usually…
This is a poker chip tray that will hold 100 39mm chips that stack 67mm for 20. If your chips are smaller they may rattle a bit. If larger they are unlikely to work. This prints with no supports if the inside is printed on the side and…
This is a vial carrier sized to fit a 23mm diameter vial that is 39mm in height. Most of the work came from madmaxx890 himself. He was gracious enough to produce a vial carrier STL file that fit the dimensions I (rather sloppily) took of…
Minimal 39mm lamp holder for wall
Verschraubbare Dose für Nikon 39mm Filterschublade, mit oder ohne Beschriftung. Den Teil mit Gewinde mit möglichst niedriger layerhöhe drucken. ...................... Screw-on box for Nikon 39mm filter drawer, with or without labeling.…
Staubsauger Adapter (39mm) mit Gummiring auf Elektro Hobel. Auf Wunsch eines Bekannten Hergestellt. Filament: Verbatim High Performance PLA White.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This is a square lens hood made for 39mm filter thread, designed for roughly the field of view of a 35mm f/2 lens whose front element fits inside of 39mm filter threads. This was developed specifically for the Voigtlander 35mm f/2 Ultron…
Got an order for clamps to use while dissassembling motorcycle struts on a vice. These are simple but work. Print them heavy if you plan to use the more than once.
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This is remix of the original k-iced riser plate that is a FANTASTIC design by southbaygsr I just have a Starbucks coffee mug that's too tall for the original file, I didn't even print it after looking at it in my slicer, knew it was…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
I have several different sizes with missing drawers, and the drawers from one don't all fit. So I made a model in Fusion that I can resize for each type. This fits the small drawer that I believe came from Harbor Freight but there is no…
These files are from the same parametric source project as my 36mm × 55mm × 159mm drawers , and are meant to fit into the same kind of cabinet. I haven't printed a final version of this size yet but will add pictures here when they get…
Printed with Flashforge Adventurer 5M Pro Print as oriented Supports: no Resolution: 0.2mm Nozles: 0,4mm Infil 40% Filament: PLA If you download/enjoyed this file, please leave a like Thanks
I generated two bottle holders 29mm and 39mm. Orginal one provide a parametric fille for different sizes but it is currently broken on new freecad, so for ease of use for someone I generate some more sizes.
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
Since the fisheye lens that I'm using requires an additional macro adapter, I designed this to fit and also minimize the black portions when using a generic fisheye lens on my SONY Handycam DCR-SR45 camera, though it should work for other…
Vacuum hose adapter 50mm to 39mm. Easy to print, no supports needed. PETG recommender, but PLA works too. You can scale it if you need. I used 25% gyroid infill, 4 walls and no supports allowed.
Super basic holder for adhesive backed tags that we use at work. When I print up tags for work, there are always a ton of extras that can't be printed so I'm reusing them as faux post-its. Print instructions Category: Containers Print…
These cartridge boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together. The all parts can be printed with no supports. I printed with 0.20 layer height in PETG and PLA.…
These cartridge boxes are printed as separate parts that are printed in orientations chosen to maximize strength and then snapped together. The all parts can be printed with no supports. I printed with 0.20 layer height in PETG and PLA.…
Customized version of http://www.thingiverse.com/thing:735213 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=735213 Instructions Using the following options: arm_end_diameter = 5 chamfer_depth = 2 quality…
This will fit your Fotasy 35mm lens, like this one:…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
