Counting matching models…
I previously owned a SpaceNavigator and 3D printed this handrest . Unfortunately, I could not find a similar handrest for the SpaceMouse Compact. So I designed this part. It is tested with SpaceMouse Compact 3DX-600053 (corded version). A…
I used different cases for my space navigator. All designs I used had at least one flaw: no space for the USB cord if there is space for the cord, it is not very comfortable to put the space navigator into the case So I decided to create…
3D scan of 3DConnexion wireless space mouse. This scan can be use to create cases or accessory for the mouse.
I wanted to use the OG handrest this is remixed from, but had the Wireless Edition which is bigger than the compact one. I have model 3DX-600044 and don't know if it works for any other models. The base ring was also enlarged to press fit…
Design Originally I was using a simple cap to protect USB dongle when storing it in its carry case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to loose it Then I discover the cool design →…
<Print instructions> Rafts: No Supports: No Resolution: 0.2mm Infill: 20% Filament: Prusament PETG
Available as one large model or separated with alignment pins (2 pins are required). Has versions with or without a cutout for a soft palm rest surface. I printed the large single-piece model (pictured) vertically on a Prusa XL. I also…
Travel/storage case for the 3Dconnexion SpaceMouse Compact, remixed from https://www.printables.com/model/5761-3dconnexion-space-navigator-case to fit the SpaceMouse. Includes space for the cable. The SpaceMouse joystick is safe in every…
After some years of use the knob of my beloved SpaceNavigator became very sticky. Blame the silicon cover for it, the only downside of this great tool. I'd like to recommend using cling film to cover the sticky silicon surface, it's thin,…
I've only had my 3Dconnexion Wireless SpaceMouse for a few days and I'm already super worried about losing the USB adaptor. This little handy gadget is a 3Dconnexion SpaceMouse USB Holder. It fits perfectly around the SpaceMouse and the…
Please see details as per the version whit is remixed from. It allows for the Wireless version of the space mouse to be used.
Note! This is for the wireless version of the Connexion mouse with the square base. This is a mashup of a similar base for the wired mouse. I added the base from a storage case for the wireless mouse. I did this on Tinkercad. The source…
This is a handrest for the SpaceNavigator Desktop edition. Your SpaceNavigator won't move around anymore when using it! I made DarthBane's model a bit smaller so I could print it on my Prusa Mini. You can either cut the pad out of foam…
Dust cover for a Spacemouse Compact Category: Computer
I've seen a few really awesome designs for SpaceNavigator covers that didn't really suit my needs. For starters, I don't really need to move mine anywhere because home is where the desk is. As such I also wanted something that was really…
Permet le transport sécurisé de ma 3DConnexion SpaceMouse Wireless 3DX-600044. La partie mobile de la commande de la sourie est libre et ainsi bien protégée. Le dongle USB est rangé. Ainsi, la sourie 3D peut résister à des chocs et ne…
The replacement consists of two parts: the main knob body and a twist-lock cover that hides the mounting screws for a clean look. I wanted to make it look a bit nicer, so I went with a two-color design with a pattern on both the knob and…
Dust Cover for the 3dconnexion Spacemouse Enterprise if you have a large enough printbed, you can use the “CoverSpacemouseEnterprise” file. otherwise, use the “…interlock_p…” Files and superglue it together.
A really atractive and easy design who brings the most perfect combination of style and storage. Print Settings Printer: Genius, X1 , ortur Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: everyone - Notes: easy to…
Two-Piece Dust Cover for the 3dconnexion SpacePilot Pro With easy to print thread. I don't know what to say… it's arguably the best design for the task :)
This knob comes handy when the soft touch surface of the original knob gets tacky and sticky. To replace pry away the glossy cap on top of the knob and remove the3 screws. I've printed it in PETG but it should also be printable in other…
3Dconnexion SpaceMouse Pro Cover quickly slipped over dust protection for the spacemous pro
Transport box for the SpaceMouse Wireless from 3Dconnexion . The box provides secure space for the SpaceMouse and the USB transmitter. This means that the SpaceMouse can be transported well protected. Please note: The clamp is available…
Free desktop space by put it vertically.
In a case of form taking the upper hand on function, I present this "low poly" 3DConnexion SpaceNavigator cover. I wanted to do something more creative for the cover than my previous design. I had this idea that it should look somewhat…
Have you ever had the problem that you got tangled in the cables on your desk and you had to scream for help for two days until you were finally rescued? Do not be afraid, I got you covered. With this overengineered desk hole cover, there…
The plastic of my SpaceMouse's knob became sticky. This is a replacement part I designed.
This Handrest is for the wired 3dconnexion spacemouse compact. There are two versions one with keys and one without. The keys can be found on aliexpress. https://de.aliexpress.com/item/1005002991725727.html
Extrusion, external perimeter = 0,86 (Then you mostly get a single perimeter)
I remixed the original design to add some cable clips around the outside for storing the cable. I re-created the parts instead of modifying the original files, so they might not be perfectly intercompatible.
The 3DConnexion Enterprise SpaceMouse is a fantastic input device for 3D modeling, but on my messy desk it takes a lot of room and I don't want to stack stuff on top of it. So I designed this cover that protects it; it's worked really…
Gridfinity 2x2 holder for 3Dconnexion SpaceMouse Compact
Please split the file into its two components an align them properly using the tools in PrusaSlicer. Supports are not required, I recommend to use separate layer heights for each part, as the lid may be difficult to open and close when…
Remix of Spacemouse hand rest designed by PrinTiger
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Replacement palm rests for the 3dconnexion sp1usb spacepilot, a plain and two different textured ones.
I finally bought a 3dconnexion Compact Spacemouse, and started designing something to go over it that would have buttons or keys right there. While I was doing this I got the idea to create a little dust cover for it. The model is on its…
Hello, a while ago I made a protective case for my 3D Connexion Wireless Space Mouse. I wanted it to be snug and protected on my travels and this is what I cam up with. I originally printed it in PLA but I am uploading it now as I have…
J'ai ajouté à la base Stream Deck de Alluvian une base pour la Spacemouse de 3dconnexion (Bluetooth Edition) -- I've added a base for 3dconnexion's Spacemouse (Bluetooth Edition) to Alluvian's Stream Deck base.
Dust Cover for the 3dconnexion Spacemouse
Box for SpaceMouse Wireless and USB dongle with lock (and it works). Printed with ABS but it was rather a mistake. PLA or PET would be better ;) Category: Tool Holders & Boxes
This is a weighted base to hold the 3DConnexions SpaceMouse (Compact, Corded) firmly in place while you are working with it. It has a slot to press the cord into. It works great. This has a round hole that fits only the corded SpaceMouse.…
No accesories needed for assembly (screws, magnets…), cover has to humps to lock in closed position.
SpacePilot Pro is heavy so i added more back support to make it more stable. 50% infill. Monero address: 83d3kbWybpUayehL3jX4YXT4gu3zxWyAKPtgKvQR996pbYRnshBGkhqdMMtvF c4ETEjjQKwk9b5jTD6cJkRrcbfeEVieTRv Bitcoin address:…
Box for 3DConnexion Wireless Mouse Box für 3D Connexion Funk Maus
TPU CAP for Space Mouse cover designed by https://www.printables.com/social/27923-rickseiden Print with TPU (I'm using Eryone)
I was given a SpaceNavigator that was removed from some industrial equipment and didn't have the stock metal base, so I decided to model one! This is a shell that eventually became part of a handrest . I'm posting the model in case it's…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
Design Concept The Container Box for the 3DConnexion SpaceMouse features a compact and sleek design ideal for securely holding the device while not in use. It ensures the safety of your cherished SpaceMouse during transport or storage.…
After getting a Spacemouse wireless, I realized that it did not come with any way to safely transport the mouse or USB receiver other than the original packaging. So, I designed one to be 3D printed. Right now I have it designed to accept…
I designed a replacement in two parts - a hard inner component that screws onto the sensor, and an outer cover that should be printed in TPU so it can stretch over the inside component, and to give you a more comfortable grip than with a…
Create a stand to combine a 6-key 3Dconnexion SpaceMouse + Keyboard The design was created to be comfortable for the configuration I use shopping list: https://3dconnexion.com/es/product/spacemouse-wireless/…
3DConnexion Maus Ich wollte einen Staubschutz Deckel für meine 3DConnexion Maus. Super zum Drucken ohne Stützten. Ich habe es mit PETG Weiß gedruckt auf einem Elegoo Neptune 4.
Printed in PLA on Flashforge Adventurer 3. 10% infill
Design Originally, I was using a simple cap to protect USB dongle when storing it in its carrying case with SpaceMouse. But the dongle was moving inside the carry case and with the risk to lose it. Then I discover the cool design →…
needed an all in one solution for holding these units in place. i use autocad inventor at least 10 hrs a day and have found the streamdeck to be very usefull but too low an light. i may come back and add a base under the deck so i can add…
This is a little plug for the SpaceNavigator to use USB C breakout boards , and convert it to USB C. To install, first unscrew the 3 screws on the bottom, underneath the rubber ring. Pull the base assy off too, that holds the cable in…
I printed this with PETG. Layer height of 0.2mm Nozzle size of 0.4mm
3DConnexion Wireless Spacemouse Handrest - TPU dust cover and TPU feet
Working with the 3DMouse Compact is more difficult than expected, as you have to make sure it is always aligned on the table. Even small rotations can make it difficult to work. With the larger models from 3DConnexion, the actual 3D mouse…
A little adapter piece I made, to mod my 3Dconnexion SpaceMouse Wireless to USB-C. Beware: After the mod, there is no data connection left, so you can only use the port for charging! Printed with PETG, 0,2mm layer and tree support without…
If you find my work useful you can: paypal.me: https://www.paypal.com/paypalme/printyourfix Visit my website for contact form: https://printyourfix.com/ Follow me on Instagram: https://www.instagram.com/printyourfix/ Visit YT channel:…
This is the top portion of a spacemouse from 3dconnexion. It has a rubber coating that over time breaks down and becomes sticky and gross. Simply pop the top cap off yours, unscrew the 3 screws, remove the old top knob, and slide this one…
I tried to clean my dirty 3D mouse with isopropyl alcohol, turns out that it MELTS the rubberized cover, turning it into a unusable sticky mess. I took off the cap, unscrewed the knob and cleaned it very well, however I still didn't want…
This model is a dedicated holder for the 3Dconnexion Numpad Pro, designed for seamless integration with the IKEA Skadis board. The holder provides a secure and stable mount, ensuring the numpad is easily accessible while keeping the…
The outer sheathing of my 3DConnection Space Mouse cable (first edition?) started to tear. So I designed a cable-routing stand/sleeve to prevent further damage. It fits over the existing stand and has a slightly less sharp edge. It's…
Dust Cover for the 3dconnexion Spacemouse Enterprise if you have a large enough printbed, you can use the “CoverSpacemouseEnterprise” file. otherwise, use the “…interlock_p…” Files and superglue it together.
Design Concept The Container Box for the 3DConnexion SpaceMouse features a compact and sleek design ideal for securely holding the device while not in use. It ensures the safety of your cherished SpaceMouse during transport or storage.…
