29 models
This printer profile is perfect for LW PLA and the planes from 3DLabprint, Planeprint, ... This is a PrusaSlicer profile, which can be used with the BambuLab X1C, because the BambuLab slicer partly does not recognize internal structures…
Now you can print the block and valve covers in different colors of the 3DLabPrint Piper J-3 Cub for a more detailed look.
Upgrade your RC plane, Piper Cub or other Bush plane with grass wheels for faster landings! This upgraded tire is 65mm wide and uses the same wheel disc as the standard (original) Piper Cub wheels. > Print with 0,4mm, 0,5mm or 0,6mm…
I have used the LEOPARD LC3536-6T 1270KV motor, back mount. Unfortunately, there is no cooling of it. There is no air flow around the motor. So, I have created a new motor mount with air holes and printed it from ABS - it allows a better…
I redesigned the motor support of the 3DLabPrint Piper J-3 CUB already equipped with the hole to pass the power cables. I recommend printing it in ASA, ABS or even PETG so it can handle the heat generated by the brushless motor.
Needed a better more true spinning spinner for my 3dLabPrint 48" Edge 540. This one has prop access when mounted. Snug, centering hub fit for Eflite EFL01893 3 Blade 11x6 Propeller. Uses M3 Heatset inserts with M3x20mm screws. The tip…
This is an alternative model of engine cylinder for an RC airplane WACO YMF – 5. The original model was created by 3Dlabprint and is available on their website https://3dlabprint.com/shop/wacoymf5/. This model doesn't have as much…
Created this from one of the retract bases that came with the 3DLabPrint Vought F4U Corsair 1.9 m printable RC plane: Vought F4U Corsair – 3DLabPrint , so it is technically a remix of that base (which is only available from 3DLabPrint).…
A simple wheel cap to glue onto the factory rim of the 3DLabPrint Piper J-3 Cub. I used a low-profile, button-head machine screw to attach my rim to the main gear legs.
The Zero (https://3dlabprint.com/shop/a6m2zero/) is amazing and very fun & easy to fly model! However, I felt like adding a few upgrades here & there to make it better meet my needs. This is a work-in-progress post, I'll keep adding new…
Used the Radiator STL from "RC Spitfire Accessories" unchanged..'remixing' done in the slic3r. Loaded the radiator in to Prusa's Slic3r PE twice. Scaled each one to 216% Clicked 'Arrange' Selected one and rotated it 180° so were facing…
fits fine onto existing landing gear
It's my own remix of the stand P51-D Mustang RC plane stand by 3dlabprint. I printed it with Polymaker PLA+ Black; 3 walls; 20% infill cubic; I recommend printing with a minimum of 4 brim to avoid lifting the piece from the bed!
I made the supports to save space. They are joined together with the help of M4 screws and M4 hexagon nuts, I used M4x30mm only because they are a bit long, you can see in the pictures. The hole for the first support, which comes on the…
A simple battery case designed to be glued or mounted inside the fuselage, such as with Velcro straps. The dimensions can be easily adjusted in slicer software to fit your specific battery size.
Print with 2 perimeters, 20% infill, layer height 0.2mm. Cut away the PLA threads and the middle jetty can stay in place. Print instructions Unassociated tags: PT 17 Category: R/C Vehicles Summary Print with 2 perimeters, 20% infill,…
This is a 25x25 motor mount that will allow a motor with an output shaft on the rear of the motor to be installed in the plane. Includes the correct right/down thrust angles. Print at 100% infill.
Ein schöner mehrteiliger Spinner für die 3DLabPrint Piper J-3 Cub. Da es noch keinen passenden Spinner gibt, habe ich diese speziell auf die Piper von 3DLabPrint entworfen und an die Oeffnung vorne angepasst. Die Schürze sollte mit den…
I converted the pdf file into an svg file. And in fusion 360, I just made a sketch of the svg and extruded with 0.2mm. I have also attached the f3d file in case changes are desired. On my ender 3 V3 SE I printed with the help of Cura with…
Print the covers from LW-PLA, the supports from regular PLA. Form the covers with warm air.
Here is my design of a motor mount for the 3Dlabprint Slingblade. With this motor mount you can install a Racestar 4108 in your Slingblade. Propeller 9x6 6S / 1300 mAH LiPo ESC 40 Amp Very hot ;-)) There are two versions of the part. One…
Lipo mount for the Zivko Edge 540 V3 (1.62m/64in wingspan) by 3dlabprint (ore any other) Because I didn't find a suitable bracket, I made one :-) Just glue it and use some velcro straps for fixing. My 2 x 4S 3600mAh fits perfectly Print…
An easy way to mount the battry in Sabre RC plane. Superglue the parts in place. Use at your own risk. It works for me. I do not hold responsibility for if anything goes wrong.
Motor mount for SPITFIRE MK XVI compatible with motor BR4108 600KV
Fixed main landing gear for 3dlabprint p-38 used pla with 100% infill
I made some custom wing servo covers for the 3dLabPrint Hawker Hurricane. These are most useful for the version of the plane for belly landings. Hopefully they will protect the aileron and servo horns. They are made in LWPLA but in a…
This is a full assembly for the tail wheel of 3DLabPrint's RC plane Piper J-3 Cub . I think it is more stable and easier to attach. Print Settings: Filament: PLA or PETG (recommended) for: axle linkage arm tail wheel disc Other Settings:…
Mod of 3DLabPrint's Motor Mount featuring cable cutout and alignment ridges for precise motor mounting. Print settings: 3DLabPrint's print settings PETG
Ein schöner mehrteiliger Spinner für die 3DLabPrint Piper J-3 Cub. Da es noch keinen passenden Spinner gibt, habe ich diese speziell auf die Piper von 3DLabPrint entworfen und an die Oeffnung vorne angepasst. Die Schürze sollte mit den…
