33 models
8mm Lead Screw Grease Applicator for Super Lube 21030 A practical grease applicator for lubricating 8mm lead screws directly from a Super Lube 21030 tube (85g / 3oz PTFE grease) . The adapter screws onto the grease tube and allows you to…
For the Multiboard Storage System. Standard Multiboard printer settings work, no supports needed. https://www.multiboard.io/ Added a holder for 75mm bottles. Added new versions of all the bottle holes with a Bolt Hole for the Large…
New version available ! I made a remix of this grease packer so it can be be used to quickly and easily apply PTFE grease to 8mm lead screws. Specifically fit to the Super Lube 21030 (3oz) tube so I can get it on the rear lead screw on my…
I made a remix of this grease injector and cap , so it can be printed faster . It's specific for the Super Lube 21030 (3oz) tube. So now the cap and the injector are shorter, so you save time and material. You have 3 profiles: 1 injector…
A simple holder for 3oz bathroom cups.
This model holds up to 6 x 3oz cans of wet cat food like Fancy Feast in a stack for easy dispensing. Designed to printed upright without supports and includes 2 screw holes for mounting. Putting recently purchased food on top and pulling…
I remixed the file to make it easyer to print without supports.
Hello everyone! I'm bad at modeling! I threw together yet another grease applicator, but this one has a 90 degree bend so there's no need to remove the bearings from the Y-carriage to reapply lubricant. For 8mm bearings, 3oz / 85g Super…
The IKEA CITRONHAJ Spice Jar (3oz) fits the Gridfinity dimensions surprisingly well. Here's an organizer my partner asked me to make. It raises the jar a bit so you can grab it easily. Added a v2 that pushes the jar a back a bit so that…
Will most likely fit any 65mm or 3oz cans. Two versions included - one with an inset pattern and one that is plain. Depending on your filament and print settings, the inset pattern may allow some air to pass through. Please print in PETG…
allows easier application of grease to threaded rods
Generated from jenkinl1302's "sample size" soap dish — very practical on its own merits. I needed something for a fuller-sized shave soap, thus the remix. (Fits "Art of Shaving" shave soap, 85mm diameter, 22mm deep.) I'm not 100% happy…
This holds 12 bottles of 3oz ink. So far it has been tested with Diamine and Iroshizuku.
Minimal holder for bathroom paper cups, with a small but stable holder for a toothbrush.
This is a hanger for a 3oz Brass hammer. https://www.amazon.com/dp/B0058EDQ9K?psc=1&ref=ppx_yo2ov_dt_b_product_details Requires the use of an empty insert from: https://www.printables.com/model/152592-honeycomb-storage-wall I printed it…
An empty tube to refill with grease for your 3oz mini grease gun. I printed this because the grease I needed wasnt available in a small tube to fit my harbor freight mini grease gun. I refilled it with the mini grease tube refiller linked…
After a few years of using the AeroGarden Farm 12XL, I realized that I go through a decent amount of plant food. The official AeroGarden 3oz bottles are perfect for my feeding syringes, but they are not the best value for food. You can…
created this to hold my 3oz/65mm diameter pigment containers on the multiboard. Finger slot allows very easy lifting of container. the version with the smaller opening (v1) will need just for the connection. the other container with the…
I don't know why, but the white Part A cap on the Harbor Freight 3oz two-part Epoxy tubes keep splitting after a while, and makes a gooey mess. Here's a replacement for the cap.
Designed myself on fusion 360 to hold a typical 3oz WD-40 can have available when needed. Has nozzle holder as well as its always gets lost. Can be mounted with screws or double back taped to any surface. NO AMS or SUPPORTS REQUIRED.…
I will be working on a 3mm and 4mm nozzle sizes that use a socket-head screw as a cap. For the 2mm nozzle size, a printed cap is preferable since it's too small and it can crack if pressure is applied on the inside.
Keep your Noodlers 3oz bottles from being a jumbled mess. Organize up to 12 3oz bottles. Built in mouse ears to keep the corners from warping. Snap them off after printing for crispy corners
I like using these 3oz grease tubes for various stuff..but not always with the grease gun. This allows me to use the grease tube fully, without having to cut the lip to get the lower grease out. Prints out in 4 parts, I did in PLA as it…
Holds a Noodlers 3oz bottle of ink to help prevent accidental tippage.
Cat food can lid. Fits 3oz wet food cans. 40 minute print. Print in TPU or other flexible filament should work as well. No supports, 0% infill, no brim or raft, 0.4mm nozzle, 40mm/s, 22mm/s first layer. 4 bottom layers, 0 top layers, 3…
This allows you to mount your 3oz Harbor Freight grease gun to a standard pegboard. It uses typical ¼" automotive push rivets, such as these from Amazon: https://a.co/d/7aw3xHO Fits this grease gun:…
Designed to hold four, six, or nine of Noodler's 3oz glass ink bottles. Sockets in the bottom allow the design to be stackable when the bottom tray is full. (It is not recommended to stack more than two trays high.)
Thin funnel to fill small bottles. I used PLA for this print. I was able to print it with no brim in 7 minutes.
I've had this 3oz Dixie cup holder for years. It sits on a stand in the bathroom but the stand collects water and gets rather gross over time. Originally I think it came with an optional wall mount but who knows where that went. I…
An empty tube to refill with grease for your 3oz mini grease gun. I printed this because the grease I needed wasnt available in a small tube to fit my harbor freight mini grease gun. I refilled it with the mini grease tube refiller linked…
This model holds up to 6 x 3oz cans of wet cat food like Fancy Feast in a stack for easy dispensing. Designed to printed upright without supports and includes 2 screw holes for mounting. Putting recently purchased food on top and pulling…
created this to hold my 3oz/65mm diameter pigment containers on the multiboard. Finger slot allows very easy lifting of container. the version with the smaller opening (v1) will need just for the connection. the other container with the…
(Fits most 230z cans i.e. Peace Teas, Arizona teas, Large Coke Products etc) I designed this two-piece coozy for anyone who wants to keep their drink cool and any surface they place it protected. You pop the top piece onto the can and…
