Counting matching models…
I found several existing mounts for the Focusrite Scarlett Solo (3rd Gen), but all of them had some fancy locking mechanism and/or required supports to print properly. More importantly, it looked like all of them were too close to the…
I needed to protect the lens of my Blink Outdoor cameras from heavy rain (the water drops in the lens turn the image very blurry). So I decided to do a remix of the wonderful Blink camera Hood created by Neil Baker…
Tie fighter made to hold Alexa Dot 2 may work with Dot 1 as well but dont have one to test. Working on finishing the version for the newest dot as well. designed the wings to lock into place and use 2 screws each side m2x8mm. The wings…
medaile se stromem - 3. místo, medal with a tree - 3rd place
Amazon Alexa Echo Dot 3rd Gen basic wall mount. Secure with two No6 countersunk screws
Simple wall mount for your Apple TV, so it doesn't have to lie and float, but can instead hang neatly on a wall. Fits Apple TV bracket 4K (3rd generation) ATTENTION Does not fit the older models! Apple made the 3rd generation 4K slightly…
Here is a 3rd hand helping tool to solder XLR on the field, I've been working on a couple of remote gig when it is not possible to bring heavy tools, this is just perfect for me, put it in your bag with a butane soldering iron and you're…
Edit 11/10/23: Add 9rd extension. Edit 11/9/23: Add v1.01 Vanguard variants to the files to accommodate Vanguard pushers. Also tweaked the follower for more spring clearance and lift. Edit 11/3/23: Add v1.01 files to introduce drum spring…
I wanted to make a scaled down version of truss rig like they use on auto show stands etc and so I did. Instagram reel of the monitor mount and part of the rig https://www.instagram.com/reel/DdrCQFrMHen/ This takes a lot of time and…
These were designed with a flat-back to become wall, door, or bookcase mountable. The height of these designs, while laying on it's back, is 8.5 mm with the width at 100 mm. You can resize/rescale it for your printing pleasure. You can…
This is a sleeve for the Apple AirPods 3rd generation. I printed them in Ninjaflex 85A (shore hardness). Other flex materials might work aswell. I also added modifier to generate a cutout for the charching LED and / or a engraving of your…
You should print in PETG just for heat/durability purposes. There are two versions one that just slides in (minimal) then another that utilizes the screw hole and can be mounted via Toyotas screw (no drilling or modification needed).
This is a Remix from: https://thangs.com/isaacspiers7/Jukebox-Echo-Gen2-Stand-12674 It was adapted using Thinkercad to fit the EchoDot 3rd Generation. I am not a designer, I just played around with Thinkercad and made it work nicely... of…
These are high poly scans, average poly count per mesh is about 2,500,000 triangles.
(Latest Model) - WI-FI + Ethernet
This is a remix of Virral’s insert on thingiverse . I adjusted the map tile tray, one of the token trays, and the investigator/map connector tray so that the additional components from the Secrets of the Order expansion would also fit in…
I used these to block the glare from the rear license plate lights. It shoots up a bright glare especially at night making it impossible to see. Use 3M waterproof tape, tape it to the back then add these to your rear bumper on the top…
A simple and minimalist wall mount for your Alexa Echo 3rd Gen. It only needs 2, 3.5mm screws. The model is filament-saving, it only takes 8grs!. Enjoy! :) Print Settings: 0.2mm Layer Height No Supports Infill: 20% PLA
Badges for a 3rd-Gen Toyota Tacoma. TACOMA, SR5, and V6 emblems are already sized and ready to print. I made these models because I want to print them in black ABS, because I can only find chrome badges for sale, and the OEM Badges I…
This is a complete set of organization for House on the Hill Third Edition. I remixed Plottiplotplot's awesome token holders ( https://www.thingiverse.com/thing:5570455 ) and ShayDwight's awesome Card Holder (…
A simple holder for the Siri Remote of the Apple TV 4K. It has a small recess on the back for a strip of double-sided adhesive tape. On the bottom, there is a cutout to charge the remote. Works with Siri Remote 2nd Gen. (A2540, Lightning)…
Changes to the original The original did not fit the 3rd gen tablet. So I made the following changes to make it fit :-) The 3rd gen Tab is slightly thicker The bezels are much thinner The front camera is moved The buttons and charging…
Easy to print medals to celebrate first, second and third place. Possible to do color change to emphasize the numbers on the medals. I used Oh my Gold, Galaxy Silver and Viva la Bronze (all PLA) for the different medals on 0,2mm Quality…
This is an Apple SE 3rd Generation phone case printed in TPU to protect the phone's exterior. It neatly fits the phone chassis. The cover has pockets on the inside to clear the buttons. I have also added the ‘+’ and ‘-’ symbols for the…
I ended up needing the Yellow adapter when the original file was the Blue adapter. Old deadbolt had the Green adapter, so I mocked it up as well.
There are two versions, one that can be screwed in or another without holes that you could maybe use 3M tape.
Hi makers, This thing is a remix of https://www.thingiverse.com/thing:2066228 , originally made by https://www.thingiverse.com/IMakeThisLookGood/about So, kudos to him. This one is scaled to fit the Echo Dot 3rd Gen, and give more room…
An investigator tray for Arkham Horror 3rd Edition. Made so we no longer lose our tokens. Feel free to remix it to your needs. Printed on a Bambu Lab P1P with AMS. Made with Fusion360. Image assets taken from the Arkham Horror 3rd Edition…
Modified size for the slightly smaller Apple 4k (3rd generation)
Apple TV Remote Case - Designed for the 2nd and 3rd Generation. This remote case was designed to be 3D printing friendly by designing for minimal to no support needed. It's a two-piece construction with a snap to connect the pieces when…
I wanted a raised platform stand for my echo dot, so I created this tripod stand inspired by some of the 4th generation tripod stands I've seen. You can simply place the echo on top or use a little 3M mounting tape to securely hold it in…
This is a case for the iPhone 7 or iPhone 8. It must be printed in TPU or other flexible filament or else it will not fit your phone. Originally posted 10-08-2016 at https://www.thingiverse.com/thing:1814855
Made this for a coworker that did not have the right adapter for his new lock to fit his deadbolt. I don't have exact dimensions of his lock but he says this size worked perfectly. This is likely the RED adapter listed in the $10 adapter…
Fits into the empty slot on the driver side and serves as a nice little drawer
The proposed model is a wall mount designed for the third-generation Echo Dot, an Alexa-enabled smart speaker. This wall
Mount the echo with the cable exiting the top and looped back down through the clip. Uses 3 M3 screws, no supports. The base can be printed with 20% infill but i would suggest an infill of at least 50% on the echo mount as the arms must…
Remix of ewalk40's great design to fit the 2022 Apple TV 4k model.
This is an under desk bracket for the Scarlett Solo 3rd Gen. 4x #4 countersunk screws XLR cable clip is 6.5mm wide Print with support everywhere with back the side, where the cable clip is, down.
Lids for Betrayal at House on the Hill 3RD EDITION Organizer to prevent tokens from dropping from their holders during box transportation. https://www.printables.com/model/680183-betrayal-at-house-on-the-hill-3rd-edition-organize
After 3 Straight Days of Agonizing dedication, I recreated a significantly better Model of Barad-Dûr. I hope you all enjoy a great piece of work. I am aware that most of the details will be lost to smaller prints, and I do not have any…
I have created third set of 12 simple snowflakes for Christmas Tree decoration. Each snowflake is around 5 cm diameter. Easy print. Check out my entire Christmas decorations collection:…
Kill Team 3rd Edition Tracker This tracker is designed for use with 16mm dice and helps keep track of victory points, command points, and the current turn during your Kill Team games. Its compact design minimizes table clutter, making…
I created this model to hold encounter cards for Arkham Horror 3rd edition. The holder is designed to hook into the modular connection points on the game boards. I've also included a version of this model which does not have the…
Slide on stand for iPad Pro 11 inch. Designed to lock at four positions (0, 45, 90 and 135 degrees) with a spring mechanism. Spring dimension is given in pictures. Print instruction: No supports needed for all parts. Parts with threads…
Wall mount for a Lenovo M10 Plus (3rd Generation) tablet. You have access to the physical buttons (wake-up and volume), cutout for a 90 degree charging cable and the camera in the top center. The charging cable is UGREEN "USB Type C Cable…
Allows the lid of the center console be useful space.
I designed 1st, 2nd, and 3rd place medals in gold, silver, and bronze for my wife's work event. The medals are made to be practical, with a top hoop that allows a ribbon to thread through easily. I also kept the design efficient to…
This is a switch plate for the cubby area of late 3rd Gen 4Runner center consoles('98-00 I believe). This print is for any late 3rd Gen 4Runner center console, whether you just want more switches available or you swapped to the new…
This will fit in the switch blank locations on many early Toyota models including the 1st Gen Tacoma, 3rd Gen 4Runner, and Toyota Pickups (plus others). Fits one standard size Bic lighter.
August smart lock pro 3rd gen: Defiant adapter. ran into an issue when i got my new august smart lock where i did not have the correct adapter. I saw they were $29.99 on august site and did not want to pay and wait for shipping so i…
Mount for your Apple TV (4k, 3rd generation). This can be used on any flat or vertical surface - but was designed to be mounted under a table or desk. Includes features that allows for the AppleTV to be inserted or removed even when the…
I fancied a mirrored version of the hexagonal tool organizer by lifewithmy3dprinter. I also increased the height of the tallest hexagonal tube (5). In the photos this is the one with the green inserts.
These are made to be pressed into the gap on the inside door handle. Print this in TPU! If you print it in any hard filament it likely will not fit! It's designed to be a tight fit that the TPU can squeeze into. Occasionally they may…
Provides a place to store the rear headrest when the rear seat is folded down. Can also double as a light duty handle for help getting into the vehicle. Printed in matte black PLA. Not sure how well it will hold up to summer vehicle heat,…
ENGLISH This was my first creation in the world of inserts because, although I liked the Stinkfoot71 https://www.thingiverse.com/thing:4911563 design, I didn't want to have the set in 3 boxes, Since I didn't know how to design anything…
Tacoma (3rd Gen) Cup Holder Adapter for Yeti
Base for 3rd Gen Yoto player with attached holders for cards. Does not block speakers, charging port, screen or lights. Space on front for kid's name and on base for message “printed by Dad/Uncle…”. Printed in PLA with 0.4mm nozzle on…
For everyone who loved the second collection — the wait is over! Introducing the Third Set of Snowflakes for Christmas 2025! ❄ ❄ Another Set of 12 Unique Snowflakes – Ready for 3D Printing! ❄ Bring even more winter magic to your holiday…
This is version 1 of a cup holder that I did for my 4Runner. I didn't care for others that I had found and printed. It was designed to hold Yeti coffee mugs 20-30 ounces and 32-44 ounce Styrofoam cups. The cups are spaced far enough apart…
Thank you all for the downloads and likes, will continue to post more designs :)
Description Wall mount for Lenovo Tab M10 3rd tablet. Minimalist design that does not disturb and follows the line of the tablet. The power cable is hidden. The small gap between the wall and the tablet allows for better cooling and…
These box inserts for Betrayal at the House on the Hill 3rd Edition are meant to protect the delecate game material and simutaneously enhance the gaming experience by organizing the material for easier access. All inserts can be use…
3d printed part for the white plastic liner inside the dock port on the ipod 3rd generation. The original plastic part tends to snap and i noticed mine had on doing the flash mod. This should work as a replacement liner. It will need to…
They are larger cup holders than the original ones, which we can all agree were too small. I also added another slot bin to hold stuff like a phone or wallet. The difference between the two files is that one does not have the raised nubs…
If you'd like an upgrade, or would like to support me, there's now a new version of this model in my store. It's slimmer, easier to print, and includes a panic button and immobilizer slot. Thanks! I've included a picture of the fob that…
This Mount is based on the official design, modified to fit an extendable LED Strip.
Remix of Amazon Echo Dot 3rd Gen Basic Wall Holder for the Honeycomb Storage Wall. If you made one: Share a photo!
Part may be compatible with other Toyota models with Instrument Panel Cup Holder Toyota Part Number for the cup-holder assembly: 5562035050 CupholderArm_L: Refers to the arm on the Left as viewed by the driver (as shown in cover photo).…
I made a set of game token organizers for betrayal at the house on the hill. It is designed to use 10x1.8 mm magnets to press into the parts to hold them together in the organizer. The fusion 360 files are uploaded, and I parameterized…
This is a holder for the amazon alexa 3rd generation, to hold it using the UK plug that comes with it. There is space behind the alexa to hold the power cable Supports are required, i used the tree supports which were easy to break off,…
Rotary Support Leveller - Roller 3rd Axis for Laserpecker, Xtool, Neje, Ortur, Atomstack and other brands Helps level the roller or products such as non cylindrical items such as flasks, wine glasses, pint glasses etc etc… This part is…
This is a custom square wall plate for the Nest Learning Thermostat (3rd generation). I have included a version that is just a wall plate and a version that has a slot for an external power adapter wire. I do not know if this is…
Yet another Betrayal at House on the Hill (3rd Edition) box organizer. This is compatible with all available 3rd Ed expansions: Werewolf's Journey, The Yuletide Tale, and Pennywise. Once you print this, you can pitch the other boxes. Now…
This stone pedestal not only makes a nice cover for your Amazon Echo Dot - Alexa, but is also a nice pedestal for displaying your 3d printed art. The pedestal is hollowed out to fit over your Echo Dot and has mic holes on top and holes in…
I finally got tired of the silly gap left under nearly any third party antenna or adapter on the FT-60 (which isn't flat, so can't be filled with a simple washer) and made a spacer to go on it =] It may fit a FT-50 as well, not certain.…
Back by popular demand! Originally produced in 2020, the “Clock Block” as some call it is a way to get rid of your 20+ year old clock on late model 3rd gen 4runners and replace it with a convenient place to put your phone. Unless the…
Desktop stand for the Amazon Echo Dot 3rd Generation I have fiddled together. This is already the second version, but there are still improvements to make. The back wall is a little weak and the base should be 3mm higher. Besides those…
Replacement fuel spring clip for a 3rd generation Toyota 4runner. This model is the plastic portion the fuel door. Initial print was in PLA, but warmer weather will warp PLA over time. Petg is preferable in this case.
There are two sizes to accommodate thinner thicker phone cases. I am more than happy to make variations for whatever size you need! STEP file also available for your editing needs! Print in ASA, ABS, or PETG. Needs to withstand heat and…
Triple switch plate for the cubby to the left of the steering wheel. Fits the tall Toyota push button switches. Category: Automotive
So… I don't have a label printer or a conventional 2D printer for paper… but I've got a 3D printer! Let's continue the age-old trend of 3D printing upgrades for printers by getting them to print QR codes to fool the Bambu Lab printer into…
1st, 2nd, and 3rd place medals If you enjoy this project, please consider following me and joining my supporter tier to help keep my free models coming! Be sure to explore the remixes and check out my other models for compatible…
Sometimes buying old parts for cars is not worth the effort or cost. Plus you end up with a crappy old part to replace a crappy old part. Whats the point? So off to Fusion 360 to design and make a cap. Fits great. Hasn't fallen off in…
I got the idea for this from a bumper sticker that said “Safety Third”. I thought I could do better and modeled mine after the UN Class 3 flammable placard. This can be printed easily without the MMU2 since the color changes occurs at a…
The model is a two‑part assembly : a hull and a deck. The hull is designed to be printed upright and requires supports . Internal shelves are built into the structure; these hold the deck once inserted. The deck is a separate piece,…
I decided to remix this because I wanted to use my CB Style Mic for my Midlands GMRS radio in my tacoma. Print Settings Printer Brand: Creality Printer: CR-6 SE Rafts: No Supports: Yes Resolution: .2 Infill: 25 Filament: Overture PETG…
Like my front end version here is the 3rd gen taco keychain or not!
Hello E3V2 CoreXY fellow, I’m excited to introduce the Ender3 Eternity , the third generation of the Ender 3 V2 CoreXY conversion kit. This latest evolution builds on the strengths of its predecessors while embracing modern demands for…
Proudly presenting a collection of 3D-printable statuettes, specifically designed as awards for karate tournaments. This elegant and dynamic model depicts two fighting karate practitioners in full motion , capturing the spirit of…
A bracket to mount the Focusrite Scarlet 2i2 3rd gen. audio interface under the desk top. It has countersunk screw holes, but can also be attached with hot glue or double-sided adhesive tape, the only question is whether the latter will…
This replaces the OEM center console plate for a 3rd Gen Firebird/Camaro. It is for standard shifter and has holes in it for USB power/extension devices. My car is an 86 Firebird, but the console is from an 82. I don't think this will fit…
What it says on the label. Markers for Horus Heresy 3rd Edition. Designed for resin printers.
Fits 3rd generation Toyota Tacoma in the engine bay right next to the existing fuse box. This was designed for the Blue Sea Systems 6 circuit ST Blade ATO/ATC Fuse Block and 187 Series Panel Mount circuit breaker. MUST be printed with ABS…
Version 2 of the Grand Power K100 X-TRIM 9MM 3rd magazine extension. Remix by https://www.thingiverse.com/thing:3733003 Simply take off your old baseplate, put on this extension, and then insert the shim in the rear of the extension. You…
I printed mine with Ender 3, 0.8mm nozzle, PETG Fusion model has inside dimensions as parameters so it can be easily modified. Rubber pad holes are not parametric though.
3rd leg for your Kenner Vintage R2D2 Star Wars Figure. https://youtube.com/shorts/9aDOvt-IGjQ Retro Realistic Hobbies YouTube Channel https://youtube.com/@retrorealistichobbies
I made an Alexa Echo Dot 3rd generation wall mount. No Supports needed
A fireplace charger for your old iphone 8 or SE2. I used inspiration from The Festive Fireplace. Fits older smaller phones. Use a bit of superglue to hold the hearth to the surround.
This is remixed from mirasderbissalin's desk mount to support a 1" desk and a 3rd Gen Focusrite Scarlet Solo. The desk fit is a little loose, has some space for a 3M command strip although it hasn't been needed. Print Settings Printer…
![[Insert] 2 BOX Arkham Horror 3rd + All Expansions Premium Sleeves](https://media.printables.com/media/prints/572073/images/4575908_677e62dd-a657-4b4a-abd2-18d55e8842a0/ah3-core-box01.png)
