65 models
Don't forget to hit the like button if this helps you :) A perfect calibration square print has alluded me since I got my Ender3S1. Sure I have lots of prints that work but most of them are smaller and around the center of the plate. If I…
*UPDATE* I have a newer design posted that mounts on the left side and does not require a longer cable. https://www.printables.com/model/257460-ender-3-s1-zero-offset-cr-touch-mount Like many others I was having issues with the automatic…
Die montage an der rechten seite der X-Achse führt zu einem guten blick auf die Düse. Mounting on the right side of the X-axis results in a good view on the nozzle.
intégration octoprint pour raspberry dans le tiroir de la ender 3S1
This should allow you to access my profile for Cura. I have modified Filament Friday's profile to work at the best speed/quality to mass produce prints without lose of functionality.
serre câble long pour ender 3 S1 PETG 40% remplissage 0.20 support uniquement sur le plateau
I really love the StealthBurner look and wanted to make a cooling duct that has that cool turbine look for my ender 3 s1. This is my second attempt at this. Much learned from my first v1 attempt. This improved version fixed a lot of the…
The Z-axis to extruder cable routing clip on the Ender 3S1 has always annoyed me. He's just level and rigid. The ribbon cable is always under tension. That's why I designed a freely rotatable clip that also adapts to the movements of the…
I couldn't find any endoscope mounts for my sprite pro that seemed to fit my liking so I made my own, This gives you a perfect view of the nozzle at perfect focus for this endoscope: https://amzn.to/3CX2E3k I have included pictures both…
Halter passt auf eine 20x 20 mm Profil. Ich habe den Sensor mit einer M4x 16 mm Schraube befestigt. Gedruckt mit PLA.
Filament holder with integrated mount for guides + interchangeable swivel guides, designed for the Ender 3S1 and Ender 3 S1 Pro top mount. This works great to guide the filament without needing a separate guide and you can choose the…
This is my attempt on using a silent 4020mm axial fan for cooling the heatsync. Haven't tested it yet during printing, but after my first tests on the bench, it feels like the airflow is about the same as the tiny radial noisy fan that…
Wheel locks to secure the bed tramming wheels at Ender 3S1 Plus. PLA 0.2 mm layer high 20 % infill
Набор для установки облегченной каретки от Егора Харченко сообщество EPD на Ender 3 S1 Есть 3 варианта для установки: Для стокового крепления мотора оси Y - на каретку необходимо распечатать экстендер (размер печатного поля сократится) -…
There is a newer version v2 - https://www.printables.com/model/1106005-spriteburner-v2-ender-3s1-cooling-duct-based-on-st I really love the StealthBurner look and wanted to make a cooling duct that has that cool turbine look for my ender…
I wanted to improve clifforda14's mount by shifting it back towards the x-carriage to get the axis of the dial indicator in plane with the nozzle. I opted to only use two screws to fasten the mount to the extruder. The third (blind) hole,…
This sidemounted Spoolholder for the Bambulab X1C is remixed for Compatibility with an AMS. It uses the original mounting Hardware, as well as the Spool Roller of an Ender 3 S1/S1 Pro. I added a cutout for the AMS connector cable, as I…
A slightly stronger version of the original, with more space around the bolts and more material holding the CR touch in place
It has only been a few days since I posted the original cable chain here, and I have since redesigned it to better suit an Ikea Lack case and take up less room. In this design, I have eliminated the use of a "z-axis_cable_split" and have…
Want to have the most used tools handy when printing? Keep them together where you need it. This holder is mounted on top of the Z lead screw support either left or right one according to your convenience. The model can hold the Creality…
Printed on Ender 3S1 Plus with 0.28 mm layer hight and 20% infill.
serre câble pour ender 3S1 empêchant d arracher les fils. il faut 2 vis CHC M3X30 mm
Rozměrově originální držák špulky filamentu se zámkem. Tolerance pro tisk je promítnutá v modelu. Oproti originálnímu držáku je v horní části zkosení pro tisk bez podpor na vrchní části. Tisk při vrstvě 0.2 bez problému 0.3 je dost těsný.…
Einsatz für Schublade in Creality Ender 3 S1 (PRO) Insert for drawer in Creality Ender 3 S1 (PRO)
I wanted to equip my Ender 3v2 with a motherboard from the Ender 3S1, and with a Sprite Extruder. That's why I created a case for the new motherboard with USB-C and a standard SD card. M3 brass inserts must be melted into the case. I also…
I did a simple way to just clip on a ESP32Cam board and put it on the z-axis on my Ender. The cam is fixed inside, so that you can easy use a focus tool (after preparation like remove sealing). Supports are neccessary and may be a bit…
Ive designed a part that fits the Ender 3-S1 esthetic. This part works together with a bunch of reading lights (around 8 to 12€ on amzn). Example: Open the enclosure of the light, remove the pcb, battery and if necessary cut the holder of…
3d printed ender 3s1 filament holder
Display Mount for Ender 3 S1 (Pro) using the original mount based on a Elecrow RC050 touch display. https://www.elecrow.com/5-inch-hdmi-800-x-480-capacitive-touch-lcd-display-for-raspberry-pi-pc-sony-ps4.html
Assembly What to purchase: 2x 5015 24v fans The 5020s should work on this interface (not tested), are not as efficient, but also not as noisy. 3x M3x5 screws 2x M4x20 screws The M4 screws go through the top holes to mount the fans. Screw…
I used PETG but PLA should be fine. Mine came out as a press fit but I glued mine on. Pretty solid. This model should work on any similar switch on a flat surface. It could also be used in the opposite orientation to prevent accidental…
I was not only bothered by the noise the Y-Axis made but also by the lever the pulley was exerting on the motor. Also the end stop now registers against a wheel and not a redundant screw. A bigger motor should fit well. You have to push…
added clearances for easy printing
An simple mount on the bed screws for a brush tip.
additionally needed: x1 M4x16 screw x1 m4 nut
I want the "Bigtreetech HDMI7" case verticly mount on my Ender3s1pro, so I use tinkercad to modify this project made by Mess. -Please post your MAKE to increase your Prusameters, that you can get gifts from printables.com -If you want to…
I decided to use a 20mm curtain rod for the Z-brace, mostly because I didn't like the jagged threaded rod and I have to say it looks f*ing ROD. No Z-height got sacrificed. Some X-axis stiffness is also gained. Printer gets narrower…
remix the hole to mount crtouch to 4mm OD 4mm x ID 3mm x 5mm Length heat insert is used
you settings that work best for you
upgraded/extended filament sensor holder for Ender 3s1 to use the whole Z range to prevent “bad” bending of filament on the highest layers need 1 threaded insert Appreciate for any support - comment/like/follow/make/share
Remixed from the original to reduce the size a little, and add mounting holes for Ender3S1 extruder. You will need two M3*4mm heat-inserts and two M3*5mm screws. Extruder mount is done on the top most 2 screws that hold the extruder to…
Soporte para la bobina para la ender 3s1
Organizador de tarjetas Sd para la impresora endr 3 s1
Specification real model: Length: 58 mm. Width: 31 mm. Height: 16 mm. Weight: 59 g. Voltage: 11.1V (3S1P) Capacity: 650mAh Operating discharge current: 48.75A (75C) Power wires: 16AWG Connector: XT30 Balancing connector: JST-XH
This project replace the original screen mount with an arm which allow you to mount your raspberry with klipper, a camera connected to the raspberry (I used the Longruner Caméra with IR vision) an finally a place to put tools for 3D…
This spoolholder does require my 20mm curtain rod Z-brace mod. https://www.printables.com/model/502962-ender3s1-z-brace I wanted to get rid of the original spool holder, so I can have the whole printer with spool inside of a smaller…
Ender3S1PRo Nozzle Cleaner - not more :-)
Je voulais un moyen simple et pas cher afin d'éclairer mon plateau d'impression pour faciliter la prise de vue de timelaps. A bricomarche j'ai acheter une réglette Led de marque Tibelec, modèle Valentina réf : 343210. Elle se charge en…
Creality Ender 3 S1 & Ender 3 S1 Pro
take little piece and glue to top of big cylinder an fits right in
Redesigned the whole part to fit tighter, made a full box and a drop down ledge support for the phone. Great for people using a cell phone for a camera like I do. Printed using .28mm, 10% infill nothing special. Try to keep supports off…
Front panel for ender3s1 . You will need a larger printer to print it. I printed on longer lk5 pro. It does give you access to the SD Card only. Since my printer connects by UART I only made a slot for the SD Card but in next update split…
For assembly you need to take down the fan shroud screws on the right side. you will need longer screws. m3 x 1 will do the best job. You just need to use the inside of a ballpen and fit it into the model. After that you'll need to put on…
print at your own settings that you like
18650 3s1p or 1s3p case. modeling by me
Spool holder with two 6804 bearings: a simple and efficient design that's easy to print. The angled body prevents the spool from slipping off, always guiding it toward the center. You’ll need two 6804 bearings (20mm x 32mm x 7mm) and a…
Custom backplate for the E3S1P Breakout Board Extruder, available on Tindie: https://www.tindie.com/products/ccc/e3s1p-breakout-board-extruder/ Print in a temperature-resistant material. Use supports unless you choose the version with…
I printed a lot with these mods and I had no issus yet. The pinter feels a lot more rigid now, and the quality also improved. I printed most parts fom ASA and a few are made out of PLA+, all of them were printed on my Ender 3S1. On some…
18650 Battery Holder (3S1P / 1S3P) for Radio Control Designed to hold 18650 cells in a 3S1P or 1S3P configuration, this battery holder is ideal for radio control projects. Its optimized structure ensures a secure fit and allows easy…
Einfaches auf Putz Gehäuse für die Reolink RLC 823S1 damit die Kabel an der Kamera verstaut sind. Die Kabelzuführung erfolgt über die bereits im Fuß der Kamera vorhanden Einführungsschlitze oder es wird ggf. ein loch in der Rückseite des…
holder of 1s3p or 3s1p 21700 batteries. made of petg, 15-20% filling with table supports.
