Counting matching models…
Clips on the Gantry, Prints in 2 pieces, there are 2 ‘keys’ one is slightly larger, find the one that fits best and press the 2 halves together over the key. if you print with supports, they will go into the keyhole, but they do dig out…
For Creality Ender 3V3SE, the Nebula Pad holder, taking into account the installation of a filament spool holder behind it. The holder is more vertical and away from the center. I recommend printing PETG Speed 30-50 Density - 25,…
Camera holder for Creality Ender 3 V3 SE/KE printer. With attachment for the original Nebula pad holder.
A reverse bowden tube adapter for the official Ender 3 V3 SE/KE sensor. Allows for the use of the original bracket. Important The sensor has the filament port slightly offset in both the X and Y direction. See the pictures for correct…
Added a cutout to the outside wall to make it easier to grab things out of the tray.
I kept breaking this design until i decided to beef it up. I used PETG this time. Also, the mounting flange MUST be 2mm thick. Or else it will throw your bed level OFF big time. DO a bed leveling when your done mounting everything. This…
When clipping on to the gantry, put the tiny clip edge on first, so that the bar is angled downward and hinge it upward to pop the rear hooks over the top. also, the keys still seem pretty tight, you might want to scale them down a couple…
Updated model with improved rigidity and printability
Made for Capricorn PTFE tube 4.0mm OD; vertical hole diameter is 4.5mm to accommodate for sag when printing, horizontal hole diameter is 4.3mm Printed in PETG (because it matches my fan ducts), .2mm layers 15% infill
Upgrade advantages: higher flow compared to the stock better flexible filament print quality better quality retracts faster hot end heat loooow noise hotend radiator cooling powerful dual 5015 printed part cooling. Honestly, this is…
A holder of PTFE tube that comes with Creality Space Pi drier allowing direct feed into Creality Ender 3v3SE
I really needed a way to level the gantry of this bed slinger horizontal with the base so i could level than the build plate versus the gantry: Not a forward task with this extruded base and custom extrusions so i started in Fusion 360.…
ender 3v3se spool holder The spool holder is reinforced and the stabilized spool stop reduces spool swinging
Made this clip because I had 2 cheap USB LED lights laying around which my dad modified both lights to only need 1 USB connection - And now I have light! I prefer the tight fit for stability but increasing the scale by 1% should do well…
Okay, so I didn't really design it from scratch, but I managed to get my original Ender 2 Pro spool holder test piece to ensure the screw holes are correct. I used the side mounted spool holder from @CHEP for the Ender 3 printers, if you…
Creality Ender 3V3SE Upper sensor holder
Print setting for screenmountreplacement layer height: 0.2mm buttom surface pattern: Archimedean Chords infill: 12% infill: adaptive cubic Print 2x LCD riser stand and insert them in the screenmountreplacement slots Thanks to…
It was a bummer for me to see how is the print doing even with led strips on the edges of my box for the printer. So I came up with this. It just hooks on the X axis motor. I recommend to print it in PETG because of the heat, PLA will…
3D model description Filament guide for Ender 3V3SE may work with KE, but not tested. This requires no extra bolts, and also turns your spool 90 degrees. 3D printing settings Infill-100% ABS-250C Nozzle ABS-95C Bed PLA-210C Nozzle PlA-60C…
Version 2 now available: https://www.printables.com/model/1219990-ender3v3se-screen-and-octopi-mount I have left this up so that the basic screen or printer mounts can be used still.…
This is a redesign of my previous version. Base screen mount, and printer mount files are available on the original model page, to design your own mounts. Improvements Hole now present within the mount for the ribbon cable to go through,…
E3V3SE-REVERSE BOWDEN. V1 = NO FITTING & NO CABLE CLIP V2 = NO FITTING & WITH CABLE CLIP V3 = WITH FITTING & NO CABLE CLIP V4 = WITH FITTING & WITH CABLE CLIP
Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using…
Дизайн Этот аксессуар для 3D-принтера разработан под стандартную лампу для принтера creality 3v3se. Использование Испол
It's like putting spoiler on a prius. Be aware of the fan holder position relative to the bed of the printer, so it won't scrape it when prints. This is done to lighten structure of toolhead to achieve a little more speed and stability +…
Use this link to get the gcode Free Image to G-code Converter | PNG JPG to Pen Plotter G-code Tool Just use gluetape to glue it on itll hold its for 10 mm pens . if you need another size just request.
Complete redesign on fusion to fit my printer as the frame was fatter. I loved the original design, but it fell short in being compatible. Print it PETG minimum.
Mounting adapter plate to allow the BTT RaspberryPad5, 3D printed backplate to mount to the original Ender 3 V3 SE screen mounting bracket peg interface. This allows you to mount your Klipper host running KlipperScreen (or anything using…
