Counting matching models…
Gridfinity base + boxes for aidB Eurobox NextGen Economy 400x300x120mm and 400x300x75mm which will add 2 or 1 layers of 52mm high boxes into the Eurobox. Features: Custom base plate in 4 parts which will fit into the Eurobox with a gap of…
Just a remix to use a 400x400 honeycomb cutting board from Sculpfun with the Atomstack S10 Pro to position your material at the real origo point. Had to edit the offset to fit the frame of the honeycomb. Now it is snap-fit to the…
please use the supports as provided
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
Bin that fits in a Eurobox 400x300x200 box as a 2 piece devider Print instructions pla 0,3 mm works fine
Any Cubic Kobra Max 3k spool holder for bigger prints, needed support to hold so print them both, little tight to turn in beginning but it will go on. printed with PLA
For RAKO 400x300x132 mm I've designed this divider for a rako box to fit all of my camera assistant junk. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: No Supports: No Resolution: .25 Infill: 5 Filament: SwissFil…
I used Cura's “engineering” settings for printing and was happy with the resulting print.
Z-Brace for the ender extender 400XL, requires following hardware: M8 thread M5 bolts M5 T-Nuts Optional: washers Additional tip: my Z extrusions were not entirely flat on the bottom side. I used a thin metal plate to compensate for this…
Here's a video that explains why I designed this, and shows it being installed and doing what it was intended to do — that is to keep my new heated bed wires from catching on the Y stepper motor during printing. Also catch this short…
Simply a geometric pattern for my Elegoo Phecda. Maybe someone think it is useful for them too. Either you take the complete Layout dxf for the full pattern or you just pick one of the single patterns. Have fun.
Eufy Indoor Cam Camera holder for Flashforge AD5M without an enclosure. Prints without supports
This is a case for the back of your ender extender 400xl to house a raspberry pi, buck converter, motherboard and a fan
Housing for a 4.2" 400x300 eink screen as a weather station. The screen used is WeActStudio 3 color. The whole thing is based on the esp32 dev module.
20/04/2019 added LED screen fit correction adjusment now aligned! I decided to build Bens CoreyX printer. I have a 200x200 & 300x300 beds. But I thought I'd take on the challenge to build a 500x500. So here are the panels to suit either a…
This print allows you to fit the double sided lift up mechanics into the original Remitop Vario II cranked rooftop window. It is a solution to securely place the additional tubes on both sides into the window frame. Print in UV resistant…
This is only the part of the spider that is attached to the microphone, printed with petg plastic 0.4 nozzle, 0.4 layer
Im Slicer einfach spiegeln für Links und rechtes Bein. Die Schelle findet ihr hier. https://www.printables.com/de/model/363077-ikea-lack-beinschelle-fur-haltesystem-europox-112l
Die Bilder sagen mehr als ich hier schreiben mag. Die Schelle kann natürlich auch für andere Sachen verwendet werden. Für mich dient es als Eurobox-Schubladensystem-Halterung. Gedruckt habe ich es mit Mk3S+ Nossel 0,4 im Draft Modus 0,3…
PLA Aquarium cover 400x200 mm with LED light for fish tank ANTE 40x20x25 cm 20 liters. www.superzoo.cz/akvarium-ante-s-rameckem-40x20x25cm-20l/ Super Slim LED Aquarium Lighting YX-B20S www.aliexpress.com/item/1005004844816647.html
A 3D printable USB port cover compatible with Lezyne Mini Drive 400XL bicycle light , designed to replace the original rubber charging port plug. This small replacement part helps protect the USB charging port from: dust dirt water…
Most of the below is just for historical record. This is a deprecated design. See links below. M-bot v.2; https://www.thingiverse.com/thing:3045974 M-bot v.3; https://www.thingiverse.com/thing:3134348 M-bot v.3.5;…
This is a 3D printed jig to align letter punches on the front of the 400EX frame. This jig slaps down on the VIN plate and bolts through the bumper mounting holes. This is a beauty in case the sandblasting shop got WAY too aggressive on…
Print with black PETG with the z-seam at the bottom for best results.
Basic protective box for LaskaKit 2.7" 400x240 LCD Memory display Created with OpenScad and YAPP_Box . Since the display mounting pins tend to break, I used a hot glue gun to fix the display in place. You can customize the box thanks to…
Here is a simple but sturdy shockmount I designed for my Maono PD400X microphone. It holds the microphone securely with 2 screws from original mount. You only need to get some rubber bands. This was designed to fit my needs, but I'm happy…
Diagonal Dimension : 1.39 inch Resolution : 400 x 400 pixel Display Color : 16.7M(Maximum) Touch Mode : None Module/Panel Dimension : 38.6 x 40.5 x 0.7 mm Viewing Area : 35.4 x 35.4 mm Supply Voltage : 1.8 V Luminance : 300 cd/m2…
Printed with 0.2mm layer height. Rotate so that it lays flat on the bed, support required for hole. Remove strap from bike light and attach to mount. Use a cable tie (zip tie) to attach it to the handlebars. Update 25/01/25: Made the…
I modeled this frame connector that connects the support poles to the frame for EXIT pools because I lost one of them, and I was not able to find a 3D model of it. Model number is PF2003B Note: the part that sticks out and goes in the…
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Box erhöht, damit Kleinteile bei geschlossenem Deckel nicht aus den Boxen fallen können.
The door of our old Electrolux fridge from around 2007 broke. The bottom hinge makes the door self closing and the plastic of the door frame cracked under the hinge after 10-15 years. I made replacement parts that works more like the…
A simple case for the Good Display GDEY042T81 4.2" 400x300 ePaper
I couldn't find this amp in Rockfords online cad files and I have one on hand so I modeled it using calipers and angle gauges to use in a 3d model to design an enclosure for it for off-road use. I made it in fusion so if you need it in an…
Eufy Indoor Cam Camera holder for Flashforge AD5M without an enclosure. Prints without supports
A 3D printable USB port cover compatible with Lezyne Mini Drive 400XL bicycle light , designed to replace the original rubber charging port plug. This small replacement part helps protect the USB charging port from: dust dirt water…
Box erhöht, damit Kleinteile bei geschlossenem Deckel nicht aus den Boxen fallen können.
