Counting matching models…
This holder was designed for 40 gram Elmer's glue sticks. The interior diameter is 31mm so it should work with many other large glue sticks or markers. There are two versions of the model: One is press fit to use with Multiboard snap…
This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…
40 gram washing powder spoon or 41ml normal washing liquid
.22 mag for Daystate Air Ranger. will except 40gr 30gr 25gr 22 Zan slugs. Parts Required 1x .5x12x25 spring 1x m4x8 countersunk hex screw 1x m2.5x8 countersunk hex screw 2x 4x2mm magnets Print Settings Printer Brand: Creality Printer:…
Remix from https://www.thingiverse.com/thing:2527773 Added locking tab so that no glue is needed. Tight fit. Increased windows for clearer view of pinout and voltage.
Have you also been searching for addon slot for PCIe card for your Acer Veriton N4640G? Look no further, this model is made to acuminate any single slot, low profile PCIe card. If you are looking into adding some networking card or even…
Simple Elmers glue stick holder for the Ender 3 S1 Pro (or any similar frame). Print as whatever level of detail/resolution you wish in whatever material. I just used PLA at .28 layer height and .52 line width. Two different glue stick…
This thing is a BXA sized holder to store your quick change tools on the back shroud of your PM-1340GT. I assume it will work with the PM-1440GT as well but do not have one to try. I've included the step file as well for people to modify.…
The stock rubber way wipes on my Birmingham YCL1340GH kinda suck. I designed these upgrades in 2 pieces each. the main part can be printed in PLA, ABS, PETG or anything you want, then the wiper part printed in flexible TPU and the parts…
Einfacher und materialsparender Abfallbehälter in der Größe LxBxH 160x90x50(mm). Wiegt nur Knapp 40 Gramm :P Druckeinstellungen: Material: PLA Schichtdicke: 0,2 mm Füllgrad : 100% Wandstärke: 0,6 mm…
This 3D-printable case is designed for a RS232 CH340G USB-to-TTL programmer . It protects the electronics, keeps the wires organized, and makes the device easier to handle during programming or debugging. Perfect for DIY electronics…
My Birmingham YCL1340GH came with a 30t, 40t, and a 127/120 double gear, which allow most common inch and metric thread pitches. These additional change gears will allow you to cut nearly any pitch that exists. For example, The stock…
Printed from PLA at .15 and worked as expected. There is a sacrificial layer you must pinch with a screwdriver - therefore no supports needed.
Klüber Microlube GL 261 (40g tube) LM8UU applicator needs supports
This is a chuck cradle / bed protector for 6" and 8" lathe chucks. I designed it to fit the ways on the Birmingham YCL1340GH, Grizzly G4016 and many other brands of the 13.5x40 lathes sold by various US Importers. Use a raft and plenty of…
My daughter has recently developed a passion for studying mushrooms. Although she used an older Canon camera to capture images, I noticed that in the forest environment she had to lie down to obtain quality macro shots in low light…
Intro 3D Parametric Model (OpenSCAD) of holder for UGREEN 40Gbps M.2 NVMe Enclosure and standard 40mm PC fan (stackable) Detailed model design description, as well as source code are hosted on GitHub Demo photos uploaded here are in two…
Need to learn 3d modeling. So started with something fairly basic, that I can use. It is a single serving (for large, French press quantities, etc) coffee bean cannister, to hopefully help keep the beans more fresh. So you open the bag…
Print with standard multiboard settings, and auto tree supports enabled.
Vertical stand for Acer N4640G PC
Here are two 3D models for mounting PCIe cards to the side of Acer Veriton mini PCs. The printed part mounts to the chassis using M3x4mm screws (I have yet to confirm if this screw length is 100% safe!). I'm also planning to design a…
40g light weight chassis for XTRFY M8 wireless mouse. Better suited if all your mouses feel like they are too small in your hand. Good wide grip for claw hold. Original mouse taken apart: https://cherryxtrfy.com/mice/m8-wireless/ No side…
Noticed when removing the 3d print model from P. Phienphanich , the contents inside the yadom got caught and every tiny bit inside the container spilled out. So i made this as an addtional, optional, accessory. Designed for the 10g/40g…
I have used Prusa PC Blend for beater adapter and classic PLA for the pad. There is hole for neodym magnet 6x3mm for pad. Tested with chocolate ice cream yet :-) Works!
Basic 2020 holder for a 40g UHU stick Print settings 0.2mm layer height 20 % infill. Print standing upright.
Da das Kabel zum Mac etwas steif ist, fällt das Gehäuse um und liegt auf der Seite. Das gefiel mir nicht. Deshalb 2 von diesen Standfüßen gedruckt und das Gehäuse eingeschoben. Nun bleibt das Ganze stehen.
IKEA Skadis Glue Stick holder for 30mm / 40 gram glue sticks. Can also hold prescription bottles for the storage of miscellaneous items or medication. Never lose your glue stick for school projects and keep your important medication…
Vented shell for the UGREEN 40Gbps M.2 NVMe SSD Enclosure ( https://www.ugreen.com/en-au/products/au-55316 ). This enclosure has heatsinks on both sides, so there's no flats for mounting to a laptop. This shell provides two 1" x 3"…
3D-printable cradle/holster that wraps your ACASIS TBU405 PRO aluminium SSD enclosure and mounts it to the lid of a 13" MacBook Pro via a Quad Lock–compatible four-point twist lock. The drive slides in and is held by a snap-on end-cap;…
These are inserts for the bottom of aerosol spray paint cans for when using a mechanical shaker (Sawzall, reciprocating saw, other), so that the bottom of the can does not deform and dent excessively from the rapid agitation of the…
.22 mag for Daystate Air Ranger. will except 40gr 30gr 25gr 22 Zan slugs. Parts Required 1x .5x12x25 spring 1x m4x8 countersunk hex screw 1x m2.5x8 countersunk hex screw 2x 4x2mm magnets Print Settings Printer Brand: Creality Printer:…
A small simple model that holds Wiseorb 40gm silica gel canisters on the lids of spool storage bins. Uses a dash of super glue to install. You may also need to use an activator on HDPE/PP/PETG plastics.
Introduction When I decided to assemble my HomeLab Rack I wanted each device to have its own dedicated holder, as I like to keep everything tidy and wanted to avoid a mass of shelves. Unfortunately I couldn't find any satisfactory…
Yet another poop chute for QIDI Plus 4. It is light weighted, only ~40g without a container. It can be printed without support. You can use your favorite box to collect poop. I use fastener tape to easily mount and unmount the chute…
MAIWO40Gbps + Deepcool CK-AM209 passive cooling radiator mount printable no support. I made it.
Designed for the 40g Elmer glue stick to be held inside the Qidi imate s could probably hold other glue sticks of up to 30mm diameter but the Elmer stick is my preferred choice and quite popular so made sense to make a holder for this…
A small case for the Integral V Series(V2) 240GB SSD with a clip on top. Not too detailed as it's just meant to fit into another project I'm making. Uses an m3 inser of 5mm depth and 4mm width on the ridges. Other than the insert hole…
For dad Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Doesn't Matter Supports: No Category: Other
I like the original model, but scaling that up to hold a 40g stick also made the walls rather thick and the mounting holes rather large. I kept the original backplate, scaled the rest of the container up in X and Y only, closed-down the…
This is a replacement lid for LePage 40g glue sticks. If you work in an environment with kids who use art supplies, then you know that lids tend to disappear. Now you can print as many as you need. Buy LePage Glue Sticks Here I designed…
