Counting matching models…
Panel mount for XT60H-M connector. This variant was used on material that was ~ 0.625" / 15.875mm thick. Plug is a tight friction fit, installed from the back. The inner plate has just enough protruding to locate it in the hole and hold…
Dust collection with 58mm attachment for vacuum. Replaces Dust Nozzle 416497-7 and has attachment for existing vs direct attachment of 58mm vacuum. Print Settings Printer brand: Prusa Printer: i3 MK3 Rafts: Yes Notes: I printed using…
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
The model for this piece available in the stud.io parts library was missing the notches for the Bohrok faceplate to latch into, so I modeled my own version based off of pictures of the original Lego piece. This model will require supports…
I made an exact replica of the original VFC Speedloader adapter, because I lost mine. I tested it on a V2 416 mag and it worked fine. this probably works with other brands as well. Give it a try and submit some feedback please.
This model is compatible with the lego system.
This is a replacement shelf for a Frigidaire 241691311 refrigerator. It goes on the upper section of the door. The shelves that come with this refrigerator are an extremely poor design, and break almost immediately if you put any weight…
This model is compatible with the lego system.
This model is compatible with the lego system.
(Pardon my english, I am not a native speaker) Tired of wobbly PTS mags in your magnificent 416 ? Here is a solution ! This magwell will hold your mag in place and preventing it from oscillating from right to left into the pew's magwell.…
This model is compatible with the lego system.
Replacement parts for 3D printing for Frog Engineering AR15/HK416 HPA GBBR conversion for WE. For details see link:
This model is compatible with the lego system.
I made a rear protection cover for the golf 4 vehicle spare part light Replacement part Enjoy!
All parts shall be printed from stiff, strong material, prefferably PETG CF or Nylon CF
lego 3070 3069 63864 2431 6636 4162 14719 3068 26603 87079
I made this model from physical measurements I took. It is as accurate as my harbor freight digital calipers are. The model is based on FA2-16/1WEK but I have Z2S2416 also, and the only difference is that the heatsink covers more area and…
30% Hexagon infill and normal PLA schould be more than enough. I cleaned the parts and the wall with Ethyl Alcohol before taping.
This model is compatible with the lego system.
This model is compatible with the lego system.
the stock rear part is broken easily, so I found a model and fixed some geometry issue and enforced it. enjoy! here is a small video on how it drives :) and one more updated: just broke the same part on the other model 284131 - and it…
Update June 2025: 100 degrees Fahrenheit today, and the spring snap of the current version is no longer providing retention with the clip when printed in PETG. Update July 2025: ABS printed clip is holding up to 100 degree temp so far.…
speedloader for normal and practice rounds for G36 and HK416 mags with Nato 5.56 clips
This is a replacement for the Braun Juicer 4161 switch spring (part #81262218). The original part got some fatigue cracks over the years. I was unable to obtain an original spare part, but I didn't want to throw away a good juicer, so I…
Wera 416 RA stackable Gridfinity tray, also holds some bits.
Print best from PLA, complete part should be made of outer shells. Has anti-elephant foot features implemented, for orientation check picture attached. For assembly instructions check link below:
This is headlight dust cover cap remixed to fit LED bulbs Works as replacement for part numbers: 3AA941607, 90009172 Tested on WV Passat B7 but should work other models and brands with same part numbers.
This custom enclosure is designed for the Raspberry Pi Zero 2W bundled together with the Waveshare Ethernet / USB Hub HAT (model 20416). It provides a precise fit, secure mounting, and reliable operation in a compact form factor. The case…
I have printed M416 trailer https://www.thingiverse.com/thing:2055193 but I did not like design of axle without bearings and booth wheels sturdily connected with axle. Also axle will be hitting stones so i would like to see axle from…
This Braun blender came without a wall mount, so I made one. It holds the motor unit and whisker part. Printed in Prusament signal white PETG on the Prusa Mini. Supports for the holes, 0.15 layer.
From https://www.thingiverse.com/thing:2815310, by erdem03. Backup for when thingiverse offline, OEM no longer available
Honda HRG416 HRG466 Izy Radlager / Bush Vorne & Hinten Einmal maßstabsgetreu gezeichnet aber ohne Sollbruchstelle Innendurchmesser 12,7mm Außendurchmesser 27 Einmal mit Übermaß gezeichnet um Schrumpfung entgegenzuwirken Innendurchmesser…
you might have to sand it baced on what your gun is
Bring your own ATM gearbox and charging handle. T piece is printed Only tested with Chenghai SX and LDT compatibility is not guaranteed. Hardware Needed: 1x m5 rivnut for the buffer screw 6x m5 hex nuts for the handguard 2x m3 hex nuts…
Inspired by the reef 416d for your G5 GHK, it's equivalent to a GHK G5 12" CARBINE KIT. A 5" 14mm external barrel extension supplied since 02/07/2023. You will need a 300mm internal barrel. I recommend the coated print with support on…
This is a keystone adapter for a Decora style wall plate. The corner radii perfectly matches a standard Leviton profile. A "TOP" label is incorporated to the front and back side for ease of installation. I recommend printing front side up…
Guide hop style retro mod for VFC HK416D & M27 generations 1 & 2. Official VFC system is patent pending, this is just a retro fit upgrade mod to bring your old HK416s back to life. No profit is being made of the mod. See manual in the…
Gridfininity for Mitutoyo dial indicator (2416A). This should fit all standard mitutoyo 1" dial indicators. Updates Recreated the model with a number of changes: Changed the rear lug hole to a cavity to allow rear lug attachments such as…
Metal panels made of 1mm aluminum: 2x 3mmx2.0mm screw for each side/door 4x 5mmx2.0mm screw for the roof 3x 5mmx2.0mm screw for the hood Spoiler: I used the screw of the wheelie bar wheels to assemble the two parts. Base printed on the…
Edit: Added the cross plate detail, 2x M4 and also the modified cross plate with holes. Model created to mod a E-11 Star wars blaster into a E-10R model with my M300a model. As close as i can from the avaible sources. Model designed to be…
After I build the type e-Lab based on a DSP5005 I wanted to power it with 36V to also cover higher outputs though more devices. Since I've haven't found a case for the 36V version I created my own. It uses a IEC320 mains inlet and XT60E-M…
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
Parts for a Nerf Gun -lufa -Spust -Muszka -Szczerbinka
Made some caps for the stock tires for less grip. Now I can drift with my off-roader. Just use any material. I used PLA - works just fine.
Halterung für einen 12 V DIN 4165 Motorradstecker 12V Motorbike Plug Holder DIN4165 Print Settings Printer Brand: Anycubic Printer: Large Size Chiron Rafts: No Supports: No Resolution: 0,3 Infill: 10% Filament: Eryone PETG weiß Category:…
blade protector for the Boska Holland 320416 Choco Chopper Chocolate Knife, Compact, Stainless Steel ( https://de.boska.com/products/choco-chopper ) printed with greentec pro (dishwasher safe) to print upright on the short edge Print…
This item can support your HK416D. Please don't let your beloved weapon lie somewhere, let it stand up and show it to your friends. Since private ownership of guns is not allowed in our country's laws, this is the parameter of 3D printing…
This set of parts lets you change the toy to a foam dart hobby grade blaster. The building set was found on Amazon sold by Yanscian, not available at this time so why am I uploading? Eh why not. You can use any 2 130 can motors, Worker…
NLA Jaguar Pipe Clip C4399416. Created from a photo w/ scale Not yet printed. May or may not work. Model may need adjustment. 1.10" pass through hole for pipe. The material between the circular ribs on the stud-push are meant to be…
Print a pair of face, print the beams, screw with M3x10. Category: R/C Vehicles
Mitutoyo dial 1" test indicator holder, skeletonized for easiest fit in toolbox. Shown with no 2416 but others will fit. For reference this indicators plastic bezel is about 2.25" diameter, Stem is 3/8 diameter. I will be uploading other…
hexnut instead of rivnut
A couple of parts to replace the battery tray and RX/ESC tray and move them lower down. Also includes braces to replace the stock trays to save some weight and space. You can use the included hardware, although for the battery and RX/ESC…
Spare Knob for OK OWM 16416 A3 Typ: FS614Al in to parts. The Pin has to be glued to the Knob, if you dont want it to move freely. Printed in Pla, but I recommend Petg. 4 Walls 25-30% Infill No Supports
Choose the face, mirror one, print the beams, screw with M3x10.
I needed more grip for my modified WLtoys 284161 (with ezrun 2030 brushless motor), so I bought mini-z buggy rear tires ( https://www.miniz-boutique.fr/pneus/pneus-miniz-buggy/pneus-arriere-type-z-20-mini-buggy.html) and inserts (…
IKEA Floor Lamps 70145132 60416176 Image to Lithophane http://3dp.rocks/lithophane/ Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0.2 Category: Other
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
hose and handle connection made in a single body for greater solidity
I lost a cap off my camper jacks and the other 3 were old and cracked. OEM replacement caps are over $8 each so I designed this cap for a replacement. Just print it and snap it in place. Be sure to check out my profile for more of my…
EN: To indicate that the clothing or material provides protection against chain saws. DE: Hinweis darauf, dass die Kleidung oder das Material gegen Kettensägen schützt.
Gridfinity holder for the Sennheiser MKH 416 microphone. Originally designed with a lid that didn't end up fitting, so one end of the box is missing the border. Still works great. Link to the item: https://amzn.to/4jdRWYx Links provided…
A simple knob for the Panasonic EVEQDBRL416B rotary encoder. This encoder used to be available for a low price from Pollin (order no. 240313 ) and has a very unusual shape with a thick metal “axle” that could be used as a knob as-is, but…
CZ: Hekler Koch 416 Atrapa Tlumiče pro FX náboje EN: Hekler Koch 416 Dummy Silencer for FX bullets
The switch that controls the damper in my refrigerator broke, preventing the motor from turning and opening and closing the damper. This is a direct replacement for that part, that's more sturdy than the original. When replacing, ensure…
I lost a cap off my camper jacks and the other 3 were old and cracked. OEM replacement caps are over $8 each so I designed this cap for a replacement. Just print it and snap it in place. Be sure to check out my profile for more of my…
I remixed a stand for normal bionicle foot and i added a technic hole for small bionicle foot This is a remix of the model by StawiamKlocki.pl
Inspired by the reef 416d for your G5 GHK, it's equivalent to a GHK G5 12" CARBINE KIT. A 5" 14mm external barrel extension supplied since 02/07/2023. You will need a 300mm internal barrel. I recommend the coated print with support on…
I made an exact replica of the original VFC Speedloader adapter, because I lost mine. I tested it on a V2 416 mag and it worked fine. this probably works with other brands as well. Give it a try and submit some feedback please.
Model of the .416 Rigby cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be ligth and…
This model is compatible with the lego system.
Model of my old airsoft gun HK 416 made just for fun in Autodesk Inventor. If you want just part, ask me.
ORGANIZZATORE GT416 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante: Artillery Sidewinder X3 PLUS / X4 PLUS
A 1:1 Scale Klukai/HK 416 axe I modelled from scratch. Swingable and sturdy for your cosplay needs Files are both for resin and FDM printing. 3D printing settings No supports needed for FDM. Resin supports of course.
I made this because there are no other models of it on the internet that I could find. Also use supports.
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and i think every…
Simple mount for securing a 8541634849 driver board. This is the board that works with LP173WD1, N173FGE-L23, B173RW01, LTN173KT01, LTN173KT02, B140RTN02, N140O6, B140RW02, & N140FGE-L31 model LCD panels. Accepts 4x M3 threaded inserts…
This model is compatible with the lego system.
Material: ABS (Enclosure might help) Layer thickness: 0.3mm Nozzle Temp.: 240-250 °C Heatbed: 90-100 °C Printspeed: 40mms/40mms (Outer/inner lines)
This model is compatible with the lego system.
Part 1341416 Drive Connection Link for a Delta 40-150 Scroll Saw. The drive link is unavailable to order, so I designed a replacement. I'd recommend using an engineering grade filament, since this part is under a constant load, directly…
The HK416 is a high-performance, gas-operated assault rifle from Heckler & Koch
Water deflector compatible with the Brema CB416 ice machine. Helps direct water flow and prevent spills in the ice bin.
Wall Mount for LEGO MOC-82416 Lamborghini Countach 10295 A simple wall mount holder for the LEGO MOC-82416 Lamborghini Countach, built from the LEGO Porsche 10295 set. I wanted a clean way to display this Countach MOC on the wall, so I…
Who doesn't love Pirate Robot Cookies! FRC Team 4160 presents our Pirate Robot Mascot as a Cookie cutter.
Had a lot of cables and Webcam, which I could not mount on the LCD. So I made the hook for cables and a small platform for Webcamera. Also added Freecad model just in case someone want a remix.
![[AIRSOFT] VFC HK416A5 Magwell for PTS EMP](https://media.printables.com/media/prints/943621/images/7207319_e770af12-f9c6-4d61-a8f6-b93d025482fa_5a8789ef-9c3d-4243-acda-24244f075e31/20240714_213352.jpg)
