Counting matching models…
I wanted to hang my McLaren F1 horizontally, but I couldn't find a bracket for it. So I made one! Fusion 360 files included, feel free to modify. The screw holes might be a bit small, but I had no problem with 4mm screws. Gcode file is…
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for one variant
Designed to fit snugly in the center of mass in the model. One screw seems to be enough to hold against the wall I recommend printing it with at least 6 walls, 35% infill, tree supports.
New for 4/24/24 - Minimal versions! Use the minimal versions to save time and filament if you don't intend to use a spacer. About The vertical mount supports nose-up or nose-down. The horizontal mount supports nose-left or nose-right. The…
Stand with nose up
Print the model upright so the layer lines are vertical when mounted to the wall for best strength. I printed with PETG but you can probably get away with PLA as the model isn't very heavy.
Print using at least 4 perimeters and with 20%-30% infill. I suggest some material that resists cold flow better than PLA such as PETG or ASA. Leave the part the way it is oriented to the bed so the layer lines are arranged properly for…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
Welcome to my first published model! This is a wall mount for the Technic Mercedes F1 car. The majority of mounts for this car require supports and/or are printed in an orientation where the car will be pulling against the layer lines -…
Printed with 3 perimiters and 50% infill. Wall Mounts for the other super cars: LEGO Technic - Porsche 911 GT3 RS (42056) by ravestop LEGO Technic - Bugatti Chiron (42083) by ravestop LEGO Technic - Lamborghini Sian FKP 37 (42115) by me…
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose down. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
Hier ein Ersatzteil für verschiedene Bausätze. Kompatibel mit LEGO® Technic 7M / 7L 4211805/44294194/44294 - 55mm lang
Wall mounting your Lego Technic model frees up valuable desk or shelf space, making it a great option for smaller rooms or offices. Custom designed bracket specifically tailored for specific lego technic supercars and provide a secure…
Simple wall mount for the LEGO Bugatti Bolide (Set #42151 and #42162) to be able to hang the completed model in a vertical orientation. The pegs slide into the open area in the floor just in front of the rear diffuser, and are angled at…
A display stand specifically designed for LEGO® Technic Mercedes-AMG F1 W14 E Performance Pull-Back (42165) It’s stable and balanced enough that it won’t fall forward, so you don’t need to worry about it. There is a version without the…
A wall hook for the Lego Ferrari to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The holes are sized…
Please link the model if you like it! 'Hello everybody feel free to download this model for personal use, if that are for commercial use you need to pay. its a good way to get your lego cars on the wall so you have more place hope…
Lego Koenigsegg Jesko Absolut - 42173 - Wall Mount
Mountable enclosure for HCW-M421 Delay Timer Module. Requires: 4x M3 heatset inserts 4x M3x15mm brass standoffs 4x M3x6 screws of your choice for the lid Update 1: Added option of Lid with Integrated Standoffs in Lieu of Brass Standoffs…
I was not happy with the wheel disc design on the Lego McLaren F1 Car released in 2022 (Kit 42141). Designed these as a replacement. The model you see printed in the pictures was done using a variable layer height of 0.2 at the base all…
Wall mount for LEGO Technic 42127 BATMAN batmobile. Wide area for double-sided tape and solid hold for front wheels. I used Pattex Fix 120kg red tape to stick it on. Update: Stronger sides for not bending Need a supports under the logo,…
Lego Technic Mercedes-AMG F1 W14 E (42171) Wall mount to mount the facing nose up. Hooks in so can not fall out and pulls car to the wall slightly so all 4 wheels are touching still.
A wall hook for the Lego Sian to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The three prongs on the…
LEGO Technic Mercedes-AMG F1 42171 Horizontal Mount Printed using PETG and 0.2 mm layer Print vertical using minimal supports as shown in pic. Should take 40min max to print depending on your settings of course.
Rigid NXT Shop Vacs already have a rotating coupler on the end with a locking attachment. I designed this to attach the Rigid shop vac to Dewalt DWE6421 and DWE6423 orbital sanders. This adapter has a feature that helps still utilize the…
This model is compatible with the lego system.
Designed to match Small size Command strips. Use 2 command strips, one on each side. The F1 logo takes some fine-tuning & creative slicing to print well, I may try to revise to print cleaner in the future. Print flat, and use supports for…
This model is compatible with the lego system.
Skadis wall mount to fit the Mercedes F1 (42171) and the McLaren F1 (42141) Lego Models. Wall mount is printed in multiple parts to reduce the amount of supports needed, I would recommend tree supports for the main backing plate.
It mounts under the seat
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
This model is designed to be printed as three separate parts and then snapped together. Print one plate and two arms , flat on the bed. The orientation should already be set. I recommend PETG, ABS, or ASA for best performance. In theory ,…
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
This model is compatible with the lego system.
Wall mount bracket for the Unimog Technik 8110 Kit and the Lego Land Rover Defender 42110 Kit. The defender hook is about 6 mm shorter, but you can use the longer Unimog hook for both if you don't mind the front wheels of the Defender…
I printed this model flat at 20% infill using supports. The screw holes are chamfered to hide them a little. This model fits under the front wing of the Lego car.
This model is compatible with the lego system.
Print ideally using signal white PETG; vanilla white PLA is also suitable. Since the spare rim uses cross axle and thus can not have a hubcap, you can either print 4 standard versions (with hubcap) + 1 spare; or simply 5 of the “spare”…
Remixed so there is no gluing involved. Print and push onto the axel rod.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
The BMW model is decently heavy, so make sure you use some kind of drywall anchor if you're not able to screw the mount into a stud. The hook grabs onto the oilpan of the motor between the two lower black aero farings.
This model is compatible with the lego system.
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
About This design allows you to mount a Dell docking station (WD15, WD19 or WD22) to a Dell P3421W monitor. You can either use no additional hardware or the official Dell Docking Station Mounting Kit to do so. BOM (Always) For the…
I printed in ABS with bambu strong profile. I don't recommend printing it in PLA, since it can sag after some time. PETG might be ok! The wheels parts will fit very snuggly, but I still recommend that you glue them together. This support…
This model is compatible with the lego system.
boat or catamaran 42105 2 models in 1
Modification to anchor the bracket with screws to the wall
This model is compatible with the lego system.
Plätzchenform für Unimog-Liebhaber ;-)
Quick attach sander adapter. Fit ShopVAc hose.
Holder for Knipex 1242195 wire stripper. Requires skadisnut to mount. For further instructions please check https://www.printables.com/model/228663-t-nuts-for-ikea-skadis-pegboards Happy printing! 05.09.2022: Added files with 2.2mm…
Bmw E30 - front strut wiring holder. OEM-number: 61 13 1 370 421. Modelled with original dimensions. Perfectly fits on original place. Fusion360 source-file (*.f3d) attached. Category: Automotive
I wanted to hang my Peugeot 9X8 horizontally, but I couldn't find a bracket for it. So I made my own inspire by @Lode_286198 F1 wall mount Just some little support and here we are ! You need to add two little pin for the engine cowl that…
Kids broke the bucket where the forks attach so I created this one in CAD to reinforce the connection. I've placed cut-outs on the front of the interface so that it is easier to attach and remove. I've also angled the tabs on the back for…
Laptop Stand for Dell Latitude 5421
I bought Some Dell monitors and used them for some time. Eventually I got a mount, so I could have a 4 monitor setup. These didn't have VESA mounts, so I was looking at replacing all my monitors. I decided to model an adapter to fit on my…
Printed of PETG, with supports. Spare vacuum bag holder Philips VC-H4213E-14
Got this model from my wife for Christmas and since the space in my office is very limited, I wanted to hang the P1 to the wall next to my Lego Lamborghini Sián. For the Sian I printed the very nice wall mount from @WorstCase about a year…
One common application of the Sennheiser's MD 421 microphone is to record toms. The original mic clip does not work well with drum mic clamps as it is too close to the drum skin. Instead, it usually ends up using a mic stand to orientate…
Wall mount for LEGO Ford GT 42154
recommend setting the fill to 50%
Wall mount for horizontal attachment
This is intended to be printed upright on the build plate, and should not need any supports. This was all done with the modifiers available in Prusa Slicer, so it takes a touch of work, but it came out good. It's been up on my wall for ~1…
This model is compatible with the lego system.
CZ Jedná se o náhradní díl Bruder hračky 42197 viz. https://www.bruderland.cz/oj-pro-vuz-fliegl-bruder-42197_z360/ Tisknuto z PETG černý, ale je možno i z PLA. Je potřeba udělat podpěru pod závěsem a tisknul jsem to na 2 perimetry. Výplň…
lego 4215 59349 23405 98280 30022 87421 47847 6082 64453 65735
3 models in 1 choose the one you prefer
LEGO Technic Weighted Counterweight – Part 80428 (Liebherr LR 13000 - #42146) The original LEGO Technic counterweight for the Liebherr Crawler Crane LR 13000 - #42146 relies on stacking identical solid elements. While visually accurate,…
lego 32028 4510 30586 4216 88393 4217 2653
A wall mount for the LEGO 42110 Defender. Securely holds the defender at an angle to the wall. The mount fits in central part of the underside of the chassis, designed to insert and fit around various pieces, and securely hold via the two…
Print with 0,2 / 15% infill / supports only bed Glue together Finish
I designed these hooks specifically for my MJX HYPER GO RX car. I printed them with eSun PETG-CF filament, using 100% infill, concentric patterns, and a low, constant speed (I used 50mm/s for all printing fields, 255°C/70°C). For the best…
This is a cookie cutter in form of an Unimog 421. Print settings: -0.4 mm nozzle size -0.2 mm layerhight
Wall mount for LEGO Bugatti Bolid 42151
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
Un montaje rápido, sencillo y fácil para el monoplaza de Fórmula 1 Technic McLaren de lego 42141 en posición horizontal. Se utilizan tres tornillos para paneles de yeso para colgarlo en la pared. Configuración de impresión 3D Altura de…
Wall mount for LEGO McLaren Senna GTR 42123
Edit: Uploaded a improved version, the previous was a little to tight. It needs to be printed with a flexible filament (TPU) Fits: S60 -2009; V70 2001-2008; S80 2001-2006; XC70 2001-2007; S60 2011-; S80 2007-; V70 2008-; XC70 2008-; XC90…
I wanted a way to keep my workhorse DW421 sander near my CNC router so I created this wall mountable holder. The holes accomodate a #10 screw or smaller, which should be plenty strong enough to mount it to the wall. Feel free to remix to…
modified to be used for set 42169
A Brio 100 raiser for DELL monitor P3421W, so that it will not block part of thin bezel creating a notch. See pictures. Print with left side or right side (the t shape side) facing down so you will not need any support. The original…
Lego Defender 42110 Stand. print with tree support
This is a simple wall mount for the Lamborghini Huracán Technic LEGO set 42161 that can leverage command strips to mount to the wall in vertical or horizontal direction. I originally printed this on the P1S in .2 and gyroid 15% infill and…
This model is compatible with the lego system.
loose ground coffee cover for philips coffee machines For models 1200/2200/3200 For me only like a case. I don't use the hatch opening printed on creality ender 3 v2 neo printer material petg filling 20%
Bonjour tout le monde, voici un support mural que j'ai designé pour maintenir en place le vaisseau LT81 de chez LEGO (Heavy Spaceship LT81 42181) Il suffit de mettre en place 2 pin supplémentaire comme indiqué en photo le vaisseau tien…
Used to mount the LEGO Technic Jesko on the wall. Simply screw the bracket into the wall and then slide the car onto it. Print with support, side (as pictured), 20% infill and three perimeters.
Wall mount for LEGO Jeep Wrangler 42122
A friend of mine lost the rackmount wings to their Netgear GSM4210P. The screw holes are for M3 countersunk hardware. Print Settings Printer: Railcore 300ZL Rafts: No Supports: No Resolution: 0.2mm Infill: 30% Filament: Atomic Carbon…
Front body mount for MJX Hyper Go 14210 or H14BM. This part it's not an exact copy from the original piece because it was designed to be printed instead of injection molding and the material it's also different. Print: 0.2mm layer height;…
A wall hook for LEGO 42137 (Porsche 99X Formula E) Print with back of hook on build plate, use tree supports!
This is an add to a model from ThingWizard on thingiverse.com. I added the base and fixation screw. It needs : a 3/8' (microphone stand size) ruthex insert for the base a M6 ruthex insert for the fixation, a M6 bolt with square base (see…
A simple way to display a Lego Ford GT 42154 on a wall. We tried some other models that snapped and since we didn't want this car to end up on the floor in pieces, we beefed it up. We printed with PET-CF, a .8mm nozzle, .32mm layer…
This is a bigger version of the original receiver box top part for a MJX Hyper Go 14210, 14209 or H14BM (only tested with 14210). It has the "max" size, that's fits, without modify the shell mounting height etc..
