57 models
The first part of my project to create a functional two-way radio. I hope someone likes the model. I tried to stay as close to the original as possible. První část mého projektu na vytvoření funkční vysílačky. Snad se bude někomu model…
Print approx. €6.50–€7.95 excl. taxPreliminary estimate for PETGSource material: PET
Modified the original design to accomodate the upper 2 screw holes, making it more sturdy. 299 174 10.07 Category: R/C Vehicles
Universal (fits both L&R sides) front and rear swingarms for 144001 as well as new from the ground up front steering hub. Each part is tested to fit, installed on at least 1 car and driven for at least 1 full battery charge. Recommended…
UPDATE Nov 01, 2021 I've had issues trying to print these with PETG. I've changed the cylinder and piston to be oval so there is less overhang in the clearance area between them UPDATE - Feb 24, 2021 Uploaded a V2 version with more…
Designed this to be simple and easy to print. The one in the photo is printed in TPU, as I figured it would withstand crashes a bit better. However, at this thickness it is a bit floppy.
Wltoys 144001 front and rear shock cover / Protector. Added front and back covers for upgrade towers (sold on AliExpress). Screwed from behind. thx, front protector remix from https://www.thingiverse.com/thing:4602685 Print Settings…
The STL is only for the right side. You need to mirror it in X direction to get the left side too. You only need two M3x8mm screws. printed in ASA weight is ~3,2g
Update 2: after some track time using the drift tires, I would change the spokes to be on the inside of the rim or in the sidewall as of now they take significant amount the tread. And maybe add some heat set threaded inserts for the rims…
For use on grass and gravel. Might not work so well on asphalt. The bigger diameter (~90mm) is useful in taller grass. If you prefer the underside of the printed part to be on the outside/inside (maybe because you use a textured…
Wltoys 144001 front and rear shock tower 3mm. SVG files added for cnc. Category: R/C Vehicles
For use on porbably every terrain. I still have to test them myself. If you prefer the underside of the printed part to be on the outside/inside of the TPU parts (maybe because you use a textured printbed), feel free to mirror the…
A wall mount for Wltoys 144001 RC buggy. There are 4 screw holes (4mm diameter, countersunk) to mount it to the wall. It holds the buggy by the rear swing arms. Category: R/C Vehicles
parts that you cant buy separately, but breakes often, reinforced design for FDM printing, print solid
This is a replacement 3D model I created for a friend for his WLTOYS RC car for the front knuckle. This uses the stock dimensions and has enough clearance to make the steering arm thicker if needed. Recommend printing it vertically…
For use on sand (beaches). Might not work so well on other terrain. The bigger diameter (~90mm) gives more room for speed and should work better with bumps. The hexagonal hole is a tight fit depending on your printer tuning. Front wheel…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
A GoPro Mount Fit on Wltoys XKS 144001
Opony polecam drukować z TPU, świetnie się do tego nadaje. Resztę wydrukowałem z PLA. Przy druku z TPU lepiej wyłączyć retrakcję i jeżeli posiadasz drukarkę z ekstruderem bowden zmniejszyć prędkość drukowania do około 30mm/s.
Wltoys 144001 top deck 2mm and spur cover. added: 3mm, 4mm and 5mm thickness. SVG files added for cnc. Category: R/C Vehicles
I needed a bigger bumper cause my kids keep breaking parts.
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
Simple Skid plate for WLtoys 144010 - 144001 RC buggy 1/14. Use 4 M2.5x12mm screw. Print in Petg but PLA will work too. Made with Tinkercad.
Shock mounting screw brace with shock guards. This design ties into the alternative shock mounting holes for more support. It is designed to be tapped to M3x0.5mm so the screws fasten directly to it, it does not use nuts. Reuses stock…
Saeco Philips 2200/3300/4400 EP2121 EP2136 EP3146 EP5144 EP2124 Lid. You can find bean extentions but no one modeled the lid. I needed a replacement after mind cracked
This is a cap for the Ryobi RP4400 Flashlight. My Father lost his cap for this flashlight and we didn't feel like spending 10 dollars buying a used cap online, So I 3D designed this one, its a very basic design, allowing it to be quickly…
This tractor is not meant for young boys. This part broke fairly quickly and instead of buying a new part I created this in Fusion 360. Not very detailed, as the original is but it's good enough for a functional part and my boys don't…
LOWER SPRING HOLDER FOR WLTOYS 144001 Category: R/C Vehicles
This model requires one unit of rack space (1U) and supports attachment through screw fixation. Simply select screws of your choice and secure them as illustrated in the provided photographs. For optimal printing results, orient the front…
Redukcia na nasunutie klapky ( https://www.igm.sk/igm-hradidlo-s-alu-priehradkou-pre-hadicu-100mm/?tab=1 ) Print instructions Material: PETG
Spare plate for the Hammer 4400 bandsaw version without holes (thay are useless) simply snap in place
I have never seen such a tire, so owning a 3D printer gives you the oppurtunity to experiment! This is a print in place spikey tire for you rc vehicle. The model is designed to match the original hex nut. Ideal on soft and wet soil, not…
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
A higher holder for battery on WLToys 144001. This one is only for the front, as you still need lower one for the cables to clear. Might design the rear one if the battery will still be falling out. It's snug fit for my Teranty 3500 mAh…
Die Hammer N4400 Bandsäge hat einen 120-mm-Absauganschluss. Dieses Teil ermöglicht den Anschluss eines 100-mm-Absaugschlauches. Es ersetzt das Originalteil. The Hammer N4400 band saw has a 120 mm suction port. This part allows the…
Ich denke ich muss zu dem Teil nicht viel schreiben! Einfach herunter laden - ausdrucken - einsetzen - fertig. Das Druckteil ist leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe 0,2 mm Perimeter 3 Stützen nein…
I felt the front of the car was cut short so I added a nose cone that works as a bumper as well.
I really liked the look of the PHAT Bodies ATAK body on the WLToys 144001 but it does not mount properly to the stock configuration SO I made new body mounts that replace the stock mounts and a new wing top plate that works with the GURT…
The original Design is too flexible when printed in TPU. I added some Stabilizer and holes for the front screw. Also removed some material to save some weight. Print Settings Printer: Sidewinder X1 Rafts: No Supports: No Resolution: 0.2…
Body parts to add led strips to the Wltoys 144001 remote car. Controlled via Wled . Printing in TPU is highly recommended! Also needed: Esp32 or Esp8266 with Wled 5 V Led strip compatible with Wled Buck/step down converter to get the…
To use this you have to remove the nut that secures the pop filter to the gooseneck, the pop filter tang is then to be glued into the printed clip. The clip, clips around the microphone locking screw and should stay very secure. Say…
It is a spare part for a RC car.
The door of our old Electrolux fridge from around 2007 broke. The bottom hinge makes the door self closing and the plastic of the door frame cracked under the hinge after 10-15 years. I made replacement parts that works more like the…
Holder for battery box Gaviss GW44006; 3 versions
I picked up a relatively busted Excalibur dehydrator for cheap to use as a filament dryer, and many of the plastics were damaged. This is a replacement rear cover, which optionally has space for a switch to be added as the unit has no…
just print it like every normal print just a bit slower/einfach wie jeden normalen Druck drucken aber vielleicht mit etwas weniger geschwindigkeit
As it is described in a title ;) In short - this is the ONLY WAY to solve ALL wltoys12428 steering issues! buy cheap parts from ali - https://s.click.aliexpress.com/e/_DCCUMIV print base and top plate from this topic print servo holder -…
I felt the front of the car was cut short so I added a nose cone that works as a bumper as well.
ORC Tractor Mk 2.4 Ford 4400 Industrial mod. Alternative version of the Ford 4000. Filament used Deeplee Sky Blue & Elegoo Sunshine yellow PLA. Layer height 0.16 (0.12 for grille, badging & exhaust). Assembly as per original 2.4 tractor.
Ich denke ich muss zu dem Teil nicht viel schreiben! Einfach herunter laden - ausdrucken - einsetzen - fertig. Das Druckteil ist leicht herzustellen, die Auswahl des Materials ist egal. Schichthöhe 0,2 mm Perimeter 3 Stützen nein…
Body parts to add led strips to the Wltoys 144001 remote car. Controlled via Wled . Printing in TPU is highly recommended! Also needed: Esp32 or Esp8266 with Wled 5 V Led strip compatible with Wled Buck/step down converter to get the…
parts that you cant buy separately, but breakes often, reinforced design for FDM printing, print solid
Simple Skid plate for WLtoys 144010 - 144001 RC buggy 1/14. Use 4 M2.5x12mm screw. Print in Petg but PLA will work too. Made with Tinkercad.
