Counting matching models…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
This model is compatible with the lego system.
We have designed this model Ferrari 458 kit that you can print and assemble with moving wheels. Http://gromfrog.com Instructions Just print all of the main body parts: Ferrari part 1.stl Ferrari part 2.stl Ferrari part 3.stl Ferrari part…
This model is compatible with the lego system.
Convert your Gen 3 PMAG into a 458 SOCOM* mag Replacement follower for Magpul Gen M3 Pmag in 458SOCOM. Modeled in Blender, I included the .blend file. PLEASE NOTE: *This follower will only support cartridge overall length of 2.120 inches.…
458 Socom Follower for Magpul Gen M3 PMAG. REQUIRES MAGAZINE MODIFICATION -SEE PHOTOS. This follower is designed to retain the anti-rock nature of the PMAG while allowing for full length 458 SOCOM cartridges. The internal rib inside the…
taylor swift car ferrari 458 italia
International 4586 4WD 1:16th Scale Uses M2 and M4 screws
This is a wall mount for the Hitron CODA-4582 or 4680 (Rogers Gigabit) modem. The holes are M3 sized so M3 screws or #6 screw will work. Drywall screws fit as well. Print instructions Print using the included 3mf file or go simple and…
Designed to mount a Hitron CODA-4582 cable modem against any vertical surface using screws. The modem sits snugly on the shelf and can be easily lifted out for maintenance/troubleshooting. Sketchup file included if you want to tinker.
Update 2025-08-15: I had to replace platform parts and roof ... *it happens. Bis zur endgültigen Fertigstellung des Prototypen ist dieses Modell noch im Status “work in progress”! 1899 lieferte die Hannoversche Waggonfabrik (HAWA) die…
Printed on CR10V3 with Eryone black PLA. Nozzle at 195 and bed at 55.
.458 SOCOM stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
Update 2025-08-15: I had to replace platform parts and roof ... *it happens. 1899 lieferte die Hannoversche Waggonfabrik (HAWA) die Wagen 61 und 62 an die Nordhausen-Wernigeroder Eisenbahn (NWE). Der Wagen 61 ging 1928 an die…
Gridfinity 1x1 holder for Bergeon 1458-A-12 watchmakers Lupe (12x) 6HU (42mm) +4.4mm Lip Fully stackable, fully Gridfinity compliant
.458 SOCOM Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your regular…
This model is compatible with the lego system.
I created this material efficient reloading tray for 50 cases .458 Socom. It holds 50 rounds in a staggered 5x10 pattern. The filament needed is less than 50 grams and printing time in 0.30mm DRAFT setting is less than 3 hours.
lego 79389 73825 44728 99207 93274 3956 4598 14520 30166 41682 4585
.458 Winchester Magnum Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…
This is a nozzle for the handvacuum QUIGG MD19458H sold by Aldi. The vacuum has a pretty shitty shaped nozzle and this model improves the situation. Print upright with a brim.
20 round case for .458. Top and bottom prints for less than 40g of filament Print with a .4 nozzle .45 walls .2 layer height no support
This is a reinforced replacement for the factory "Mickey Mouse" coolant flange found on the BMW E92 (N51/N52/N54/N55 engines). The original plastic part is prone to crumbling, leading to rapid coolant loss. This model is designed for…
Ferrari 458 Speciale as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos
The low side of my car's AC is buried and I couldn't get my hand in there to tighten it well. I figured with a special wrench, a socket extension, and a wrench I can 1) avoid mangling it with pliers, and 2) get a good feel for how much…
The door spring on our dishwasher snapped which then broke the plastic roller. I was able to source a replacement spring, however unfortunately, the roller for a door spring has been discontinued with no replacement (part number:…
.458 Winchester Magnum stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
This is a wall mount for a Lego brick Colonial Viper created according to the MOC 45867 design on Rebrickable. There are two parts to this file the first is the sled that the viper sits on. The second a complete wall mount. I wish to…
A 20 round reloading tray for .458 SOCOM. Only 23gr of filament. Print using a .4 nozzle .2 layer height .45 wall width or Arachne if different may work no supports
[CULTS3D https://cults3d.com/:4176721 — full pack available at: https://cults3d.com/@Alejandro_MS ] ISO14584 M6 hex bolt — sample file, optimized for FDM 3D printing. This is a FREE SAMPLE of the complete pack which includes 65 STL files…
I reload many calibers and bought a Frankford arsenal bullet seater. I realized there was no inner sleeve for a 458 socom nor a push rod that would work properly witht eh .458 socom. So i created this little gem.
Since I had to put my CODA router sideways I started facing a lot of issues with internet connectivity due to overheating, so I printed some nice feet to increase airflow and my problems were solved. How to use: Just print 4 of there and…
Beschreibung: Dieser Einflugblock wurde speziell entwickelt, um Honigbienenvölker vor Angriffen der Asiatischen Hornisse ( Vespa velutina ) zu schützen. Diese invasive Art breitet sich seit Jahren in Europa aus und übt durch ihr…
Small perpendicular holder so your beer bottles don't fall through the wine bottle holder used in some fridges - Whirpool/Indesit/IKEA. Basically fixing this stupid part:…
Add a touch of humor and personality to your home! With a purple base and bright yellow chicken feet, this eye-catching pink coaster will transform your speaker into a unique decorative element. Original, playful design.
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
[CULTS3D https://cults3d.com/:4176721 — full pack available at: https://cults3d.com/@Alejandro_MS ] ISO14584 M6 hex bolt — sample file, optimized for FDM 3D printing. This is a FREE SAMPLE of the complete pack which includes 65 STL files…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
This is a wall mount for a Lego brick Colonial Viper created according to the MOC 45867 design on Rebrickable. There are two parts to this file the first is the sled that the viper sits on. The second a complete wall mount. I wish to…
Use the pliers to separate the parts and then assemble the car. The model is on a scale of 1:64. To scale a model from 1:64 to 1:43, you need to use a scaling factor of 148.8% in the slicer Printing this model with multicolor produces a…
the holes in the back are 0.32" diameter and 0.075" deep for magnets. I have included the fusion 360 file so you can alter the size of the holes if need be. Category: DIY
E458 or 110 locomotive that has been run by CSD (czechodlovakian railways), now is part of CD and ZSSK. Model is optimized for TT 1:120 with chasis and boogies - almost ready to go. Can be printed also in H0 and N(but with more precise 3D…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Model of the .458 Winchester Magnum cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to…
Model of the .458 Lott cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale. Use superglue to conect the parts. Casing is made to be ligth and cheap to print, if you want to add weigth id…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my…
These are replacement parts intended for a Quasar VLM458 camera. It includes a replacement for the rubber eyelet, the retainer for that eyelet, and the focus knob. All parts should be printed in a .4mm nozzle, a maximum of .2mm layer…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining…
This version has these improved features: hinge that snaps the box top and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with…
ORGANIZZATORE GT458 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
.458 CHEYTAC BULLET TRAYS FOR A HARBOR FREIGHT APACHE 1800 DRY BOX TRAYS ARE STACKABLE. PRINT ONE OF THE BOTTOM TRAYS AND PRINT 4 OF THE STACKABLE DOUBLE-SIDED TRAYS. GREAT TO CARRY AND FOR STORAGE. I ALSO INCLUDED A ROUGH SCANNED SOLID…
This model is compatible with the lego system.
This model is compatible with the lego system.
A wall hook for the Lego Silver Racer from 2000 to hang it facing upwards, wheels against the wall but no compression of the suspension springs. The hook holds the car by a horizontal beam near the front, as indicated in the photos. The…
This model is compatible with the lego system.
This is a replacement plastic bezel for the seiko monopusher 45899. Since the original is almost impossible to find. Print in black resin (or paint black), nummerals should be white. The bezel can be pushed onto the watch and stay there.…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This model is compatible with the lego system.
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Spring Latch…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Single Spring Latch…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118 to see my ammo boxes with different latches and hinges options. Other ammo boxes of this type can be found in my Double Flex Latch…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
