3/8 Wrench for GM 52458768 (AC Delco 15-33289) Low Side AC Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A 3/8" wrench for some GM R134a low side caps
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 185
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v3.0
The low side of my car's AC is buried and I couldn't get my hand in there to tighten it well. I figured with a special wrench, a socket extension, and a wrench I can
1) avoid mangling it with pliers, and
2) get a good feel for how much torque I am applying so I don't over torque or under torque the cap. The cap is important for getting a good seal (hence the o-ring inside)
I needed a 0.1mm XY hole offset for it to fit nicely, but your results may vary based on your printer. I would start with that and adjust if it doesn't fit right. It's tapered like the cap, so there is a good amount of leeway there.
Note that while many places say the thread in the middle is M10x1.0, it is actually M8x1.0 thread. GMParts.com lists both threads, with M10 x 1 in the part name, and M8x1.0 in the fitment notes