Counting matching models…
The labels are for these gridfinity boxes: https://www.printables.com/model/592545-gridfinity-bin-with-printable-label-by-pred-parame The bolts are to scale as far as possible. When the screws get too long for the label, the bolt figure…
Collection of screws (ISO 4762 / DIN 912) including : M3x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4762 / DIN 912) including : M2.5x 3, 4, 6, 8, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. This part is quite tiny, consider…
Collection of screws (ISO 4762 / DIN 912) including : M4x 6, 8, 10, 12, 16, 20, 25, 30 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4762 / DIN 912) including : M5x 6, 8, 10, 12, 16, 20, 25, 30, 35 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Metric socket head cap screws M6 with hexagon socket (DIN EN ISO 4762). Lengths 10, 12, 16, 20, 25, 30, 35, 40, 45, 50, 55 and 60 millimetres. The hexagon socket is slightly modified so that bits, screwdrivers etc. fit better. Metrische…
This model is compatible with the lego system.
Collection of screws (ISO 4762 / DIN 912) including : M6x 6, 8, 12, 16, 20, 25, 30, 35, 40 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would recommend…
Collection of screws (ISO 4762 / DIN 912) including : M8x 8, 12, 16, 20, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I would…
This model is compatible with the lego system.
Metric socket head cap screws M8 with hexagon socket (DIN EN ISO 4762). Lengths 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75 and 80 millimetres. The hexagon socket is slightly modified so that bits, screwdrivers etc. fit better.…
Original gravity broom holder but with a through-hole (M6 DIN912) for vertically alignement.
Collection of screws (ISO 4762 / DIN 912) including : M10x 12, 16, 20, 25, 30, 35, 40, 45, 50, 55, 60 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
This model is compatible with the lego system.
This model is compatible with the lego system.
ISO 4762 Socket head cap screw M1.6 - M24 / Length 3 - 100
Collection of screws (ISO 4762 / DIN 912) including : M12x 12, 16, 20, 25, 30, ,35, 40, 45, 50, 55, 60, 70, 80 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…
This model is compatible with the lego system.
About A very simple but effective thumb screw head/cap, intended to be put on top of an Allen/Inbus M6 bolt (DIN 912 / ISO 4762). I use this for mounting various things like DIN rails and other tools. The outside is slightly faceted for…
Collection of screws (ISO 4762 / DIN 912) including : M16x 16, 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Tips: for few first layers reduce printing speed to about 60% directly on printer, that gave me consistent results and didn't tear or smear filament (could be some non clean spots on printing surface, so clean carefully before printing)
Collection of screws (ISO 4762 / DIN 912) including : M20x 20, 25, 30, 35, 40, 45, 50, 60, 70, 80, 90, 100 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
Just fill the file with data found on various tables on the internet to get any bolt you need for your design.
I use the VOLT 476 on my desk for video conferencing. To make it easier to read and control, I needed to tilt it a little bit. That's what the stand does. Printed it with standard PLA without support. For assembly you need 6x M3 12mm…
This model is compatible with the lego system.
Remix of Plate, Modified 1 x 2 with Clip on Side (Horizontal Grip)
About Variation of my M6 thumb screw cap, but designed from the start to be a better fit for an M4. Less (and bigger) facets on the sides for better grip. A very simple but effective thumb screw head/cap, intended to be put on top of an…
Adjusted a grip model I liked from a similar device and made it to fit mine!
This model is compatible with the lego system.
This is a 7x2 port horizontal patch panel for Leviton SMC 47605-42W. With two patch panels side by side, a full 28 keystone ports can be added along a single row in the media cabinet. There's space on both sides of the SMC after mounting…
The spool holder is now mountable with M3 socket head fasteners (ISO 4762).
This is a travel case for the Anbernic RG476H. I didn't see anything for my handheld so I decided to make one for myself. The top half is designed to hold the included foam pad that comes with the console, and the hinges are put together…
The Leviton 47605 "Vented Premium Hinged Structured Media Door" for their structured media enclosure comes with a hole for an optional lock. When not used, the hole is covered with a black plastic insert. I wanted a white insert so I…
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
A quick model key chain of the FRC Team 4761 logo. On the sloppier/quicker slide when designing this, but still a good print! Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: .2mm Infill: 20%…
Workbench base for the St board Nucelo L476RG
Need to keep your spools dry and clean, but the folding lid of the mmu compatible printer enclosure drops your dry-box to the ground? This slide-down box-holder keeps the dry-box in place during lid-lifting maintenance. This holder was…
Spare part for mounting the cover of GROHE wall connection elbows in the shower. The clip of the original part breaks easily and the part cannot be purchased separately. Therefore, in such cases, the entire wall connection elbow must be…
ORGANIZZATORE GT476 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Artillery Sidewinder X4 PLUS Laser: Mecpow X3Pro 10W
Fixed my 1476N Taylor thermometer that is designed to break. I tried to make the end stronger to make it last longer. Printed in PETG and it's holding up fine. The original part is ABS, I would print it in that material if I could. You…
I wanted to print buttons for my handheld and I couldn't find ones specific made for mine so I made them. There are ones made for resin and ones optimized for fdm printing.
This little nub is press fit into the ADMAGB3476 and gives you spot to connect it to something else, like the ballscrew I used in this prototype. Granted, a pretty specific application... but if you need to connect to the ADMAGB3674…
Made this while trying to find a stand to put my RG476H while its hooked up to my TV. It has enough room for a right angle USB-c cable in the V2 and V3 models, the V1 has a completely uncovered cable area as well as an unaligned fan…
This model is compatible with the lego system.
An keiner Stelle im Internet konnte ich ein Gehäuse für einen 476 Akkuumbau finden. Weltweit das Erste ? Kaum zu glauben. Gedruckt hatte ich schon, passt gut, jedoch fehlte mir immer die Zeit, da noch ein paar 18650 einzubauen. Drucken…
