Counting matching models…
This spool adapter downsizes a 72mm filament spool bore diameter - Sunlu, Anycubic, Crealty, Hatchbox, et al to fit the Bambu Labs' AMS Lite rotary spool holder. Tested on A1 Mini using default settings for any given layer height and…
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
A simple gauge pod for the Nissan S13 that mounts below the dash. It replaces the oem vent assembly. fits 52mm gauges and 60mm gauges My design is a straight replacement of the oem vent assembly. no cutting, no drilling, 100% reversible.…
Generic tool mount for most 52mm spindles. Print instructions 45% infill is probably more than enough, 2+ perimeters (1mm+ walls) Fits the MPCNC Primo version only. https://www.v1engineering.com/
Improved version of my older 52mm lens cap. Prints in just two parts and clips together without screws or springs. Designed for PLA+ filament and requires supports. Print one 1x body with your selected design and 1x spring
This is a gauge mount to fit 52mm gauges into a MK3 golf central air vent. The design replaces the existing air vent and includes a back plate to allow mounting of a variety of different gauges. The back plate has two print in place…
We did 6 different version to get it in the angle that it faces the driver. We had a tight fit so it did not need any mounting to the dash, but maybe some glue or other adhesive wouldn't hurt. Printed flat down on the surface, with ABS+…
Designed this to fit a glowshift tachometer but it should fit any 52mm gauge. I wanted the print to come out cleaner so I split it into two halves. The hardware I used to combine them: 2x M3 - 5mm Threaded inserts 2x M3 - 6'ish mm Bolts…
MODEL FOR MANOMETER GAUGE TEMPERATURE, VOLTAGE, OIL PRESSURE, LAMBDA PROBE 52MM STANDARD FITS IN THE AIR WINDOW
AX24 XC-1 52mm High Clearance Lower Suspension Links A set of stock length High Clearance Lower Suspension Links for the AX24 XC-1. I wanted a set of color suspension links to match the Orange body of the AX24 itself. Printed in Prusa…
ES-Retire todas las aletas de la ventilación e instale el soporte del reloj. Tenga paciencia, primero inserte el lado curvo en los agujeros y luego el otro lado. EN-Remove all the vent fins and install the gauge pod. Be patient, first…
An adapter to use 52mm filters with an Fuji Instax mini EVO. It just pushes onto the lens barrel. A previous design was too tight and could pull off the lens barrel when removing the print. CAUTION: to remove use your thumbnail to push…
This is a 52mm Camera Lens Cap that i made myself. It does not require any special tools to assemble or bolts. IT is assembled entirely by pressure/friction and it holds really well on my printer. When you try it on your lens be sure that…
Here I start dumping the 100+ STL of screw thread adapters that I've made for the Telecentric project Waiting for the famed OpenScad “universal adapter” Maybe I'll put them all here. Start with some M42: Camera mount thread M42x 1 adapter…
FR Sabot d'aspiration (Dust Shoe) adaptable sur la broche d'origine de la CNC Genmitsu PROVerXL 4030. Il est constitué de 2 parties s'emboitant pour éviter la déperdition du flux d'aspiration. Les 2 pièces sont magnétiques, et permettent…
Lens hood to mount to 52mm camera lenses and filters. One-piece option for rigid hood. Two-piece option to print the hood from TPU and the mounting ring from your choice of plastic. * I recommend printing the threaded area at a 0.1mm…
A extra slim lens/photography filter case with magnets (6x2mm). Fits 77mm, 67mm, 58mm, 52mm and 45mm Filters. 92mm x 87mm x 10mm Maximum filter thickness 7mm
add a standard 52mm gauge to your drivers side AC vent in your Volvo 850!
A simple filter to adapt 49mm lens filter to 52mm lenses. Threads are 49x0.75 and 52x0.75. Avoid tightening the filters too much, it might be difficult to remove after (remove the 49mm filter first). Print at 0.1mm layer height for best…
Heres a simple guage pod for desk use, designed for automotive 52mm gauges. I used the VDO clock from my old Porsche 924 turbo. Theres a hole in the back for power cables, regular 12v in my case. Printed without supports in my case, and…
Made fore the Delonghi Icona Vintage portafilter 52mm porta filter with 2 locking lugs Larger needle handle hole diameter for easier install Link for needles: https://s.click.aliexpress.com/e/_Dl6Knir
If you like my designs - consider buy me a Coffee :) https://www.buymeacoffee.com/ripped Halter für 3-Fach Steckdose mit Ausschnitten für USB und Kabel. Kann mit Senkkopfschrauben hängend angeschraubt werden. Die Maße sind Breite = 52mm…
3D Printed Machinist Jacks are better than no machinist jacks. This version is pocket size and can range from 35mm to 52mm with nice knurled rings. They are quick to print and quite strong being able to handle my 175lb weight as sliced.…
52mm lens cap with flaps for easy screw and unscrew
Vent gauge pod for Audi A4 / S4 (B8 / B8.5) for 52mm gauges. Install location is the left center vent.
Update: This worked GREAT for the old, clear two-piece spools from eSun . The new injection molded black spools have a slightly larger hole. I've been using an elastic band around the print as a shim for now. This adapter fits on the…
Removed the knurling just to match some of my other items. Thinner than the original. Just enough thread to work well.
Make Your Own Car Parts: Simple Gauge Pod Tutorial (Fusion 360 for Beginners) Stop settling for expensive, generic car parts! In this simple tutorial, you'll learn how to design and 3D print your own custom automotive gauge pod using…
This is a reverse or retro adapter to mount a normal lens in reverse position for macro photography. The adapter mounts to a nikon f bayonet mount on the camera side and a 52mm filter thread on the lens. Printed on an elegoo mars resin…
This is just a simple gauge pod that has a hole in the back for a rubber grommet and uses a nut & bolt to fasten. Please make sure to credit me as I am the original creator of this model. I use structured supports to help with the strenth.
Still trying which Material and setting is best. First ones made of PLA work pretty good since around 2 month but looked a bit rough on the surface as you can see on the picture of the first prototype.
Piastra per Starlink Mini con attacco per palo da 52mm - versione 2025. Stampare n°2 pz. della parte chiamata "linguette per blocco" ed incollarle sul retro della piastra. Io l'ho stampata in PETG 25% infill, necessita di supporti.
Dual gauge pod/mount for VDO 52mm (2") 15 degree tilt up & 15 degree to left (towards driver-LHD) may fit other gauges of same size/shape Category: Automotive
I wanted an assembly-free lens cap that printed quickly (29m on MK3S+ / 0.2mm Quality). I'd love to see other designs and funny text on the front! I have printed mine out of PETG but should also work with PLA+ or ABS
This is a 3D printable pickup cover designed for standard 52 mm spaced single-coil pickups (common in many Strat-style guitars). Accurate fit: Sized precisely for typical pickup bobbins and pole spacing. Customizable: I've included the…
A remake of a spool weight adapter I found here but undersized to fit slightly more tighter spools. sized at 52mm ID with labels engraved to the sides to indicate sizing Fits 500gram weights https://www.amazon.ca/gp/product/B0C3LYT4K5
As someone with glasses, I was sick of the glare on my lenses of the computer screen. So I hacked together a little filter mount for the camera. AmazonBasics Circular Polarizer Camera Photography Lens - 52 mm…
This design allows the fitment of a 52mm gauge in place of the drivers right hand side vent. The original fins are removed, and this model is fitted in their place. I recommend you print with a material than can withstand medium…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/66viEotX4xk Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: No Resolution: .20 Infill: 20 Filament: eSun PETG Black…
Upgrade your car’s dashboard with this universal 52mm dual gauge cluster pod , designed for enthusiasts and DIY builders. This digital product allows you to 3D print your own dual gauge mount , perfect for gauges like boost, AFR, oil…
I took a bokeh filter holder and a 52mm lens filter thread and mashed them together in Tinkercad so that I wouldn't need to buy a lens filter. Use the bokeh filters from the " Bokeh Filter With Some Covers " by MrEsuba thing that I…
I've been using the inexpensive but rather nice Genmitsu magnetic dust shoe on my DIY CNC router with a 500w 52mm spindle. I recently overhauled and built a new improved (is it new or improved, can't really be both) and due to the…
This is a thick walled rugged case for whatever you need to store. The interior dimensions are 162 x 82 x 52mm. The corner bumpers can be printed with rigid material like PLA, or with a flexible material such as TPU and are attached with…
This Lens cap is designed to be printed without supports at 0.15mm layerheight and has some tight tolerances so the locking mechanism most likely has to be broken loose wich is best done by carefully bending the parts in different…
Použite svoje osvedčené pevné nastavenia pri tlači alebo: @Tlač bez podpory. PETG / vrstva 0,2 / obvod 4x / výplň 40% Kub
SOPORTE PARA RELOJES, MANOMETROS PRESION ACEITE AGUA VOLTAJE UNIVERSALES PARA 52MM
Print in PLA or PETG 0.4mm nozzle with no supports
I am using spindelholder of 69mm for Makita-Router (using adapter to 65mm). Lasermodul of Genmitsu is using small spindelholder that comes with 4040. To avoid need of changing spindelholder for laser I made this adapter -> laser fits in…
this is a foldable 52mm lens hood printed in TPU. It fits my old 52mm lenses for Nikon kameras but should work on any lens with 52mm thread. I use it on my 50mm lenses, wide angle will get some vignette ;) My Printsettings: TPU 40D 0.2mm…
This gauge pod fits in the ashtray of the E46. I used prosport boost and AFR gauges. You need to cut the rear of the ashtray carefully, and take special care not to cut the gears or spring operating the lid. I printed this i ABS.
Upgrade your Nissan Micra K11 with this custom-designed 3D printable vent replacement (for assy 687616F710), built to perfectly hold a 52 mm gauge. This model lets you replace one of the stock air vents with a clean, factory-style mount…
Designed for right hand drive model, may not fit left hand drive version. Minor adjustments may be required as there seems to be reasonable variation from gauge to gauge.
Layer height 0.2mm Infill density 10% Gyroid infill Normal supports / snug / manually set over hangs as shown in last picture 3mf file contains a modifier to fuzzy skin, I find that it helps keep the gauge in place and looks nice, can…
As I said, mattebox doesn't come with 52mm filter thread, smallest one is 67mm I think. Anyways, it works and now I can use my lens wide open
Upgrade 52mm tool mount for the CNC 3018 / Mise à niveau CNC 3018 avec une broche de 52 mm de diametre 500W -CNC 500W Axis Motor with 52mm Collets and Power Supply Speed Controller / 52mm Broche & Alimentation électrique…
Nikon, Canon, Sony lens cap holder for 52mm caps, Threaded, caps can be clipped in, or twisted in Fits any "35mm" strap Infill from 10% to 100% Printed with supports in a flat position
I remixed the existing model to attach the sides to the main body for easier use and less assembly. You need to print the grounds tray from the original model. I recommend also printing a funnel, although I haven't yet. I'm also not happy…
The grid pattern is made with prusa slicer. I made the blank plate, with only 4 fixation holes. Then in the center i added a cylinder of 6" (152mm), enforcing 2 things : No top layers or bottom layers honeycomb infill this causes the…
ES-Debe utilizar el casquillo de goma que viene con la ventilación original para poder instalarla correctamente. EN-You have to use the rubber bushing that came with the original vent in order to install it properly.
For connection Makita MLT100 table saw to Kärcher vacuum cleaner. Printed using PLA, without any supports.
90x52mm Oval Base (STL) for 3D Printing – Includes Magnet Holes Enhance your miniatures with this 90x52mm oval base STL file , designed for 3D printing . Perfect for wargames like Warhammer, this base features pre-made 10x2mm magnet holes…
I saw this on Ebay, https://www.ebay.com/itm/295944227397 Didnt wanna pay that much to try, so made my own 52mm Swirly Bokeh Effect Rotating Filter
OWN MODEL TO USE A GAUGE FOR TEMPERATURE, OIL PRESSURE, CLOCK.... IT IS NECESSARY TO DRILL BETTER FOR EACH VEHICLE
Schachtel / Box mit Deckel für 10 Stk Filter mit 52 mm Gewinde bis ca 7 mm Dicke. Die Schlitze sind 8mm breit und 56 mm lang. Es empfiehlt sich den Boden und den Deckel mit z.B. DC-Fix Velour oder dünnen Moosgummi auszukleiden. Gedruckt…
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fuji X100 series cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter…
Simple 52 mm tokens with numbers I to V. For the skull I used a very nice model by @3Demon .
This is a hydroponic net cup that I designed for my first trials with growing lettuce using the Kratky method. It should fit holes between 52mm and 62mm and can be printed without support. I printed it with some old PETG, but any material…
Hello, thanks to idea of Mr. by DevonRogers https://www.thingiverse.com/thing:5955359 , i remix it in order to fit to my stone and added a Neodimio magnetic disks 8x2 mm. Add bicomponent glue to fix it. Additional version called V2 is…
This is a z axis shuttle for a 3018 CNC machine for mounting a 52mm motor with included aluminum mount. All units are imperial so scale to 25.4mm/in for metric conversion.…
Nikon 52mm lens cap holder for a 12mm Nicon camera strap. The holder is really light at only 3.6 grams. It may feel a bit flimsy but that's the point. It's a bit flexible until the cap is on it. Printed on a well-tuned printed so you may…
Dose zum schrauben für Fotofilter mit 52 mm Durchmesser. Die Dose hat innen einen Durchmesser von 56mm und eine freie Höhe von 12 mm. Eventuell innen mit Schaumgummi oder Velour auskleiden damit der Filter nicht klappert. Gedruckt mit PLA…
I wasn't satisfied with any other lens hood around so I decided to make one myself! Based on a soviet lens hood design for the Helios lens series, I made this 42° Field of view lens hood, mainly for a Helios 44M-4 but it works on other…
Ein Adapter um einen runden 150mm Schlauch zb. an ein Brett anzuflanschen und im Rollladen einzuklemmen. Der typische 150mm Spiralschlauch, kann hineingedreht werden. Es sind Nuten vorhanden. Der Flansch hat die Abmessung 212x73mm. Ein…
Case/Enclosure for an ESP32 board approx. 52mm x 29mm with nrf24l01+ module withoud display or external antenna. Print Settings Printer Brand: Anycubic Printer: Kobra 2 Neo Rafts: Doesn't Matter Supports: Yes Resolution: 0.3mm Layer…
Dose mit Schraubverschluß für Kleinteile. Durchmesser innen 52 mm, sechs verschiedene Innenhöhen, 12 mm, 18 mm, 25 mm, 30 mm, 40 mm und 60mm. Den Teil mit dem Gewinde mit möglichst niedriger Layerhöhe drucken. ………………… Container with screw…
Print both in 0.2mm resolution and glue them together as shown in the image. I recommend printing both with PETG, but it works with PLA too - in both cases you need to screw filter in, instead of push-in! Version 2 is here
For best results adapter should be 3D printed in resin. Max resolution if it is printed on FDM printer, 100% infill.
Tested on Nikon Z in DX. This will create a vignette in FX format. A larger window was not preserving the form (more updates to come). Simple single layer print in PETG. Take care when removing a print made with PLA. The print material…
The funnel is a bit tight/snug due to shrinkage ( scale up a little) . Print funnel upside down to avoid using support. Would suggest using some bed adhesive to help ( I used hairspray ). Cheers!
a simple 52mm right angle gauge mount made for a fast yet sturdy print. 3mm holes added in base for easy mounting To be mounted on a flat surface
updated a little bit for better mounting and more flex. best lens cap on thingiverse in my oppinion for your size use (your lens diameter)/52 = multiplication factor ex: 58/52 = 1.11.5 multiply with 1.11 or 111% for 58mm Category: Camera
Diopter attachment for an Insta360 ace pro. I recommend screwing in/off the diopter while it is attached to the camera.
I created this 52mm filter holder mount on the front of my GoPro MISSION 1 PRO. It's just a friction mount system. Prints easily with little setup. You can drop ND filters, diopters or any other 52mm filter in.
Yet another Coffee tamper for 52mm filter baskets. Tamper has a 51mm diameter. Works well with the old Delonghi coffee machine I have (that only came with a fixed integrated tamper) Recommend using a “concentric” top/bottom layer pattern…
A Gridifinity tray to hold a 52mm Mitutoyo dial indicator with a Lug back.
External thread: M49x0,75 Internal thread: M52x0,75 Tested with basic PLA, no support, 0,4mm nozzle, 0,2mm layers
This is a second version of iPhone 12 Pro Max holder for 52mm photo filter. Meant to be applied on top of a cover (in this case Spigen Liquid Air, but it could work with others too). Version without any case is here Print both in 0.2mm…
Gauge pod for Fiat Linea / Grande Punto. For the driver's side air vent. The pod diameter is 52mm. I added the SCAD file so you can edit it if you want. I added the T-Jet text in the bottom corner, but it is not in the files. Have fun!
49mm to 52mm filter adapter for Fuji X100V / X100VI camera - angular version II This model is allowing to use more common 52mm filters on Fujifilm X70 cameras. Model is designed from scratch using BoltFactory Blender plugin. Adapter is…
My wife and I mountain bike and during the spring and summer bug spray becomes an important part of our pre-ride preparation. Some of our favorite trails are only 30 minutes away from Lyme, CT, where the disease that bears its name was…
I bought a laser cutter and the ventilation pipe is 152mm PVC tube. To make my life easier when it's not in use I made these hose couplings so that the pipe can just detach when needed. I also made an adapter that can go against a flat…
first i printed the Megaphone speaker, but i couldn't find the speaker in my home. so i ordered a new one. waited for 1 month. got the wrong ones when it finally shoved up. (52mm). when the correct ones arrived 1 month later, it was not a…
Sometimes these knobs are closed very tight. This is really bad in case of an CPR. I designed this lever, to open it easy. 52mm diameter Print Settings Printer: i3 Prusa Rafts: Yes Supports: No Resolution: 0.2 Infill: 40% Category: Hand…
This adapter is the result of my frustration over the newer Sunlu 63mm+ spools not quite fitting snug on the spindles of Bambu's AMS Lite. Just an adaptation of my 76mm to 52mm adapter. Nothing fancy when printing - I have printed with…
This is a custom-designed, 3D printable vent gauge holder specifically made for the BMW E46 platform (1998–2006). Designed to fit directly into the center air vent, this holder allows you to mount a standard 52mm gauge (boost, AFR, oil…
This is a fast and dirty 52 mm spindle mount to be used with the included aluminum clamp to help with heat dissipation. This was remixed from Aurora Techs mount. If you haven't checked out her YouTube channel , you should! FYI, I removed…
Support de moteur CNC pour la RS-CNC, pour un moteur chinois de 52 mm Print Settings Printer Brand: Zortrax Printer: M200 Rafts: Yes Supports: Yes Resolution: 0,19 Infill: 30% Filament: SOVB ABS orange Category: Machine Tools
![Umikot (52mm 2 lug Remix) - WDT Tool [Delonghi Icona Vintage]](https://media.printables.com/media/prints/601840/images/4788734_631ba4c7-2476-4606-b1fc-b154c6b5211a_2cdecddd-a72f-430a-be3f-bc115fa7711d/icona-vintage-wdt.jpeg)
![Gauge Pod for Flock Gauge [52mm] Universal](https://media.printables.com/media/prints/599319/images/4771637_c0154328-22b4-4758-838e-95ca17eafb6a_caf59133-3402-4212-b78d-db508417767e/20230923_0144191.jpg)
