Counting matching models…
Mopar 55155622AB, Jeep XJ/ZJ/WJ 1997-2004 "Jeep" Emblem for hood and trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about…
Print approx. €0.66–€0.81 excl. taxPreliminary estimate for PETGSource material: PET
Don't have enough grip on your Benchmade GRIPtilian 551 or have to much denim in the pocket you keep your knife. Try these handles and get a grip.…
Print approx. €5.17–€6.32 excl. taxPreliminary estimate for one variant
Mopar 55155620AB, Jeep WJ Grand Cherokee 1999-2004 Trunk lid "V8" Emblem for 4.7l models Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. This item…
Print approx. €0.46–€0.56 excl. taxPreliminary estimate for PETGSource material: PET
Mopar 55196762AA, Jeep Grand Cherokee WJ 1999-2004 fuse puller tool. Modelled according to OEM. Stores inside and underhood fuse box lid storage. Tested working even when printed with 0.6 nozzle. If the fuse has stayed in place for 2+…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for PETGSource material: PET
M.2 SSD mounting plate for DELL laptops.
This model is compatible with the lego system.
Brossel 551 Semi scale model of a NMBS diesel motorcar, put in service in 1939 and decommisioned in the mid 60's. This motorcar (autorail) was manufactured by the Brossel compagny in Belgium, equipped with a diesel engine in the middle of…
A beard comb for a Philips beard trimmer model BT5515. The model replaces the original 0.4-10mm comb.
This model is compatible with the lego system.
This model is compatible with the lego system.
Case for Atari 1050 / XF551 floppy power supply unit. Krabička pro napájecí zdroj disketové jednotky Atari 1050 / XF551. Print instructions english text bellow ==== CZ ============ Napájecí zdroj pro floppy Atari 1050 / XF551 Jde o návrh…
The SDrive-MAX is an amazing device for your Atari 8-Bit; think of it as an unencumbered, open source, enhanced version of your SIO2SD. For all its awesomeness I felt the available case designs were letting it down a lot. I’ve been…
This is a first draft of the Braun 5514 bear trimmer attachment. It fits pretty well but could use improvements. PLA works fine
Don't have enough grip on your Benchmade GRIPtilian 551 or have to much denim in the pocket you keep your knife. Try these handles and get a grip.…
This model is compatible with the lego system.
This model is compatible with the lego system.
Thanks to svatoš who provided a parametric file for fusion360 in order to ease the process of remixing to various sizes of stands. Here, the stand suitable for a Dell Precision 3551 with an inner gap of 26,5 mm. Should fit “tight”. If too…
For details, see the orginal model. This is a variation with 2 headlights and adapted to the EVE chasis described in https://forum.modelspoormagazine.be/index.php/topic,35792.0.html To make printing easier, I shared my files with…
Simple stand/clips that don't take much time or filament to print. Secures a Dell 5510 on top of it's desktop dock. Print at least 2.
Adapter für Mini-Einhandklemmen Wolfcraft (passt auch für Duro) zur Befestigung in T-Nut-/C-Profilschienen. Ich benutze sie zur Befestigung von Werkstücken auf meinem Bohrtisch.
Adaptateur SIG SG 551 553 GHK Stock picatinny rail 20mm Déposer la crosse d'origine et installer l'adapteur de la droite vers la gauche poser la goupille et c'est fait. 3 Position de hauteur. Activer les support en position debout. 0.2mm…
Stand sig 552 553 551 550 gbbr real weapon Test ghk 553 &551 ok No compatible AEG
This model is compatible with the lego system.
Mopar 55156555AE, Jeep XJ/ZJ/WJ 1997-2004 "4x4" Emblem Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. I'm not sure about the exact dimensions, but…
Adaptateur SIG SG 551 553 Stock AR TUBE GHK Déposer la crosse d'origine et installer l'adapteur de la droite vers la gauche poser la goupille et c'est fait. 3 Position de hauteur. Activer les support ou en manuel sur le m3f en position…
Honda Side Cover Grommet - Gommino fissaggio carene Honda OEM 83551-300-000 Recommended Filament: TPU Suitable for: All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
Lever for floppy drive Chinon FZ-502. Used also in Atari XF-551 Floppy (360kB) Spare part.
Spare part to wireless keyboard HP K5510. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: Yes Supports: Yes Resolution: 0.16 Infill: 20% Filament: No name, Creality ABS, PLA White, Black Notes: Printed with old noname…
This is a replacement for plastic part of Bosch adjusting device 10009551 (for fruit pulping attachment). There are two Bosch fruit pulping attachment models that use this part : Fruit pulping attachment MUZ8FV1 , with Spare part: 0103…
Optrel air hose holder part number 4551.024 for the e3000 PAPR system I got a great deal on a like-new PAPR grinder hood from eBay but it was missing the hose clip. I picked up a matching welding hood that had the correct part, so I…
So I have two of these Wolfcraft clamps and a while ago one had a broken spring. It didn't work anymore which is why I came up with this repair kit. The kit consists of the two printed parts as well as three parts you need from the…
Audi Q3 DPA 99551799802 Abdeckung, Scheinwerfer für AUDI Q3 (8UB, 8UG) - OEN 8U0955275E
This is a replacement insert for a Ryobi 12" miter saw. The saw is quite old and I couldn't find this part to either buy or download, so I made this. Maybe someone else will find it useful. It may fit other Ryobi models, I have no idea. I…
Dit is de eerste TEST versie van een interieur voor de Brossel, op basis van het EVE chassis. Ik heb dit NIET geprint (omdat ik momenteel geen kap/chassis heb om te passen). Finale versie is afhankelijk van jullie feedback
This is a custom-designed holder for the following Eheim models: Eheim 4004512 Eheim 4005510 Eheim 4004412 Eheim 4005410 The holders are available in two different sizes, 20mm and 30mm. You can choose between a single holder or a dual…
Playmobil Triangle part - 6551546
Playmobil White cube - 6551558
I needed to replace a wheel on my compact dishwasher Electrolux ESF 2300. The original part number was made in PP, and had several revisioned part numbers: #1551183104, #1551183005 and #1551183013 Print with thick walls, high infill (I…
Since the DeLonghi fully automatic coffee machines do not have a holder for the hot water nozzle, I designed a simple holder to stick on. The holder can either be glued on as shown in the photos or rotated by 90°.
Replacement of a 5515 Fan with a 60mm Fan.
Tiskl jsem z PETG se 100 procentní výplní a 4 perimetry. Jedná se o dočasný háček do zámku dveří u pračky. Např. než dorazí nový náhradní díl. Funkčnost dílu je v pořádku, životnost nemám otestovanou.
Reverse engineered HP Photosmart 5510 paper holder/bracket.
Seago Sonic SG551 toothbrush holder Print instructions Category: Bathroom Summary Seago Sonic SG551 toothbrush holder Print Settings Printer: Sapphire S Rafts: No Supports: No Resolution: 0.2 Infill: 25%
As the heat insert often snaps off from the battery cover when over tightening it I made a replacement that can be used with the original heat insert.
I designed this to make the 1551RFLBK project box from Hammond Manufacturing easier to mount to things like bikes, backpacks, and other objects to which you may want to add a small personal electronics project. There are two files; one…
Mopar 55155994AB, Jeep WJ 1999-2004 "Quadra-Drive" Emblem for trunk lid Original designer: DaimlerChrysler AG, Stuttgart / DaimlerChrysler Corporation, Auburn Hills, MI. I disallow commercial use of this model. Printed in PETG, manual…
Material PLA engine outer diameter 36mm screw spacing from the center 12mm
added long fins so that it brushes better through hair
I bought an Anker 551 tablet stand and dock for my Steam Deck, but it was too small, so I made an adapter. I've also included the files for just the part that fits into the bottom of the stand so that anyone else can make differently…
All parts prints easy, no support needed print with pla for food safety This kit fits a shelf height from button to top at 43cm
Don't you hate to load your GBB-Magazines with a wild three-piece construction, thought up by some exploited taiwanese sweatshop worker?….. Well, atleast I didn't like it. Thats why I made some Speedloader Adapters, and I think every…
Mitutoyo 340-551-30 Interchangeable Anvil 0-6" Micrometer Gridfinity Bin
Skadis mount for Ecowitt HP2551. Fits into the holes in the back of the device. Attached mlrkey's skadis mount (https://www.thingiverse.com/thing:5257623) Print with supports
Got a fully sick Jeep, mate? A YJ, mate? With, like, light bars and winches and lasers and stuff, mate? Then you need a place to put the switches! This switch plate was (poorly) reproduced based on the discontinued factory part, with…
Playmobil7106780 2 - 6551575
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/agXrNrabmVl Category: 3D Printing
What This is a compact box for the MagSafe-compatible NVMe SSD enclosure from Ugreen Compatible with Model 55151 : UGREEN Magnetic M.2 NVMe SSD Enclosure. Link to Amazon (Affiliate): https://amzn.to/4kyiW61 (thanks) Link to Amazon…
ORGANIZER GT551 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Retaining Clip for Upper Tray spary arm for a General Electric Tri Clean(GSD5511L00WW Perfect fit works well. I printed this in PETG, but may goto Nylon if this one fails. Follow print instructions on your filament for heats. I Printed…
Replacement knob for my broken one.
playmobil 7116800 2 - 6551544
Holder for the WA3551.1 battery made for the honeycomb storage wall. Press the button of the battery for put in and take out. Made in PETG. But you can use PLA. My print settings: 0.24 mm 4 walls 20% infill Support: On build plate
i used these adapters (makes sure you get ones with 4 pins) https://www.aliexpress.com/item/1005006498950794.html? slide the PCB into the holder, then strip the cable and solder the correct connections to to it. reassemble the keyboard
playmobil7116780 1 - 6551580
A replacement part for the bar that connects the flush handle to the plunger chain. I wanted to keep my metal handle, which had a tri-point connection fitting. This bar fits that specific handle. The inscription inside the metal handle…
This is the famous Japanese pork bun. I can't eat it.
playmobil7116790 1 - 6551597
I designed this protective frame for the BMW Motorrad battery charger (part number 77 02 8 551 896) . The main goal of this part is to give the charger a bit more protection during daily use. Chargers like this are often placed on the…
I have used 10 mm --- Commercial Use --- By purchasing this design on Cults , you support my work and receive a commercial license to sell physical 3D prints of the model Click here to purchase the design and get the commercial license…
This part is to replace the center, which supports, the turn signal lights of a DK5510 or for Kioti Part# T4125-69062. No need to buy a new turn signal if both front and back lens are okay. I printed using PLA, laying flat with supports (…
Repair for Anker Wireless Charger, PowerWave 7.5 Car Charger with Air Vent Phone Holder. Mount has been discontinued. Old screw and rubber insert can be used. I recommend CF Nylon but I printed with PETG. Be sure to print insert with TPU.…
decidi modelar e imprimir uma peça de substituição em 3D. Funcionou perfeitamente e agora quero partilhar a solução com a comunidade!
Edit to add: There's a ton of variations of this device, so if you figure out if this box fits your device, I'd really appreciate a comment with the type code or a picture. Most bins I found for my hair trimmer didn't fit the height of…
its a coffbean tank extender for the mile c5510
idk what should i put in here post your achievements plz <3 4-5 WALLS AT LEAST
Reverse-engineered gear shifter bushing for Suzuki. Original one is made from natural PA (Nylon) Print solid with default orientation
Passt zu Dell Inspiron 15 5518. mglw auch zu anderen Modellen. Der Fuß ist etwa 30 x 3 mm groß. Ich empfehle den Druck mit einem elastischen Material. Ich habe mit TPU 95A HF 100% Infill 0.12mm Schichtdicke gedruckt. Montage: mit etwas…
MODRA Topex (39D551) Precision Screwdriver Set 7 pcs Holder This model is designed for the MODRA System, providing a secure fit with instant click-in installation. Print it, click it into your MODRA board, and rearrange your workspace…
This model is compatible with the lego system.
Honda Side Cover Grommet - Gommino fissaggio carene Honda OEM 83551-300-000 Recommended Filament: TPU Suitable for: All our designs are free to download and use—we believe sharing drives innovation. Your support fuels our creativity. If…
This model is compatible with the lego system.
ORGANIZER GT551 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Anycubic Kobra S1 Combo Laser: Mecpow X3Pro 10W
Repair for Anker Wireless Charger, PowerWave 7.5 Car Charger with Air Vent Phone Holder. Mount has been discontinued. Old screw and rubber insert can be used. I recommend CF Nylon but I printed with PETG. Be sure to print insert with TPU.…
