Search results: 5x5

Bullet 6.5x55 Swedish

Used as a template for leatherworking. Printed upright with PLA, 0.2 layer height which seemed to work nicely.

Bonsai display table (08) round 75x75x59mm

Bonsai display table (No. 08) round 75x75x59mm, best for mame bonsai. Feel free to scale up or down until you like the result and it suits your tree. A little support is necessary, even if the pot and feet are printed separately. However,…

Zavírací box 95x54.5x32 - Closing box 95x54.5x32

Použití například na vizitky Use for example on business cards

Ender 3 V3 KE Bed Mesh Level Test (220x220mm - 5x5 Mesh)

A test print file exactly 220x220mm with a height of 0.2mm (one layer) to match the Creality Ender V3 KE's build plate, with squares at the points where the auto levelling sensor touches the bed. This has the bonus of allowing you to…

IKEA Skadis Wall Panel with standoffs, 6x6, 5x5, 4x4 holes and other sizes

IKEA Skadis compliant wall panel with 6x6, 5x5, 4x4 holes and other sizes. The standoffs are 25mm. The front will be 30mm from the wall. Mounted with 4x screws, ideall sunken head. Print with 10% gyroid infill, 3 top, 3 bottom layers, 3…

Gridfinity Base Plate 5x5

Setup for 8mm magnets to hold plate on metal surface. Magnets push in from the top. There is a small layer below the magnet. No glue needed to keep the magnet in place. Magnet can be pushed out by poking through the thin bottom layer.

Box 20x15x5 cm (no support no screw)

Box - outer max dimension 204x170x52mm - inner max dimension 196x146x50mm Video with disassembly: Used screws: no screws needed 3D printing settings Layer 0,1mm for no supports (0,2 with supports - use organic tree 25°) 4 walls infill 30%…

Screw Mounted Gridfinity 5x5 Baseplate

18.08.23 Update: I have added a v2 with slightly optimized filament usage and 2 more screw holes (to make it easier to screw down in different locations if need be). My design for a lightweight, filament-efficient version of a 5x5…

M5 Screw Collection M5x6-M5x50 ISO 4017 / DIN 933

Collection of screws (ISO 4017 / DIN 933) including : M5x 6, 8, 10, 12, 14, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too…

Battletech stackable miniature storage tray 5x5 regular size

Battletech stackable miniature storage tray 5x5, Stores 25mechs. Trays stack on each other It's stacking compatible with the 4x4 XL tray Fits all mechs if you want more storage density consider the 5x5 REG tray Doesn't stack with Small…

Gridfinity 5U Tall Bins - 1x1 to 5x5

I tried to generate all combinations i could fit on my Bambu. Magnets have a tolerance of 6.20, which works perfectly when printing the bins with a 0.6mm nozzle. Scoop A Scoop is the rounded ramp inside the bins. The position of the scoop…

gridfinity5x5-multiconnect-multiboard-drawers

I loved these drawers, but I thought, What's the biggest I could make it and still fit on a 256x256x256 build plate? Turns out it is a 5x5 Gridfinity and 5 drawers high. Note the drawers are 5u Gridfinity bin tall. I've also included the…

Gridfinity | Base: Skelet | 5x5 | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Ammo Box Swedish Mauser 6,5x55

I got a request for a ammo box for Swedish Mauser. The spacing is 50pcs/82x12,60mm. The ammo looks very pointy from unlike the sketch, but I have followed the measurements that were given. Haven't printed it but i have moved the lid in…

Gridfinity Bins - 5x5 Format

Simple Gridfinity bin. The name of the objects are the dimensions, for x and y and the height. The height is a multiple of 7mm: 2 = 14mm 3 = 21mm 4 = 28mm 6 = 42mm The x and y are multiples of 42mm: 1 = 42mm 2 = 84mm 3 = 126mm 4 = 168mm…

M5 CSK Socket Head Screw Collection M5x6-M5x50 ISO 10642 / DIN 7991

Collection of screws (ISO 10642 / DIN 7991) including : M5x 6, 8, 10, 12, 16, 20, 22, 25, 30, 35, 40, 45, 50 For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight,…

5x5 Bed Leveling Squares optimized for Professional firmware with UBL

Want to get even more accurate? Or see how accurate your 3x3 mesh is when printed in a 5x5 mesh? This is a 5x5 mesh you can use following the original instructions from the original model at the link below and its optimized to work with…

5x5 Holds Sample pack

This a 48 sample pack of approximately 5x5 cm climbing holds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors

Cable Chain 25x57

This Cable Cahin was inspired by Marius Hornberger design Its redesign to fit my needs with endconnectors This is for my PrintNC machine.

5x5 Picture Frame

Remixed from this and the original to fit a 5x5 photo. Be warned the fitment is exact (no margin for shrink), so mine printed slightly smaller than 5" and I had to trim the picture. You might want to scale it up a percent or two for some…

Two-sided sliding puzzle 5x5 (print in place)

Update May 8th 2023: Unfortunately I made a mistake and uploaded a wrong .stl file! The .gcode file is ok… @Herbi_16692 made me aware of this, thanks for that! New file is uploaded… I apologize for all wasted filament and print time! Are…

Magnet Photo Frame (3.5x5, 4x6, 2.5x3.5, 5x7)

I am so excited about this! I was so tired of my messy fridge and the random magnets to hold up the little photos I wanted on the fridge, so I came up with this simple design. Holds 4 - 6mm magnets. If you have different magnets you want…

15x5 Holds Sample pack

This a 48 sample pack of approximately 15x5 cm climbing holds with their molds generated by BH Toolset, an open source Houdini project. https://github.com/JeremSparte/BHToolset Category: Sport & Outdoors

Angle Connector (40x40x40x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…

6,5x55 Mauser ammo box

I got a request for a 6,5x55 ammobox of the new model i make. I made 2 sizes for the shell 12,42mm and 12,60mm. So you can choose if you want a little tighter fit or not. I made a o-ring to fit the lid but it's made for 2mm o-ring string…

5x5 Rubik's Cube

A 5x5x5 rubik's cube puzzle. Turning is ok, but more sanding will help. The stickers for this puzzle are available here: https://speedcubeshop.com/collections/sticker-picker/products/5x5-sticker-picker-new?variant=32287155486833 Print…

Angle Connector (60x60x60x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…

frame for rfid 25x51 keychain / рамка на ключ-брелок ПИК

[EN] Protective frame for rfid keychain 25mm x 51mm. [RU] Защитная рамка для RFID брелка 25мм х 51мм, например "тройка" или ключ от домофона ПИК Print Settings Printer: FDM Rafts: No Supports: No Resolution: .2 mm Filament: pla Notes:…

Power socket cover / Steckdosen Blende Abdeckung (55x55mm)

The original file didn't suit for my sockets, so I adjusted it. Now it's fitting like a charm. Big thanks to the creator if the original file for providing the files for editing.

Angle Connector (50x50x50x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you like this little thing, you might also want to check these…

Chainmail with & without plate (5x5,10x10&20x20) / Cotte de mailles avec et sans plaque (5x5,10x10&20x20)

ENG: Chainmail :5x5, 10x10 and 20x20 mesh versions. With or without plate. No support, print plates downwards. FR: Cotte de mailles : versions 5x5, 10x10 et 20x20. Avec ou sans plaque. Sans support, plaques d'impression vers le bas.

Infill Pattern Test Panel Reference Tile – 5x5 Gridfinity - single print or split to objects and print however you want

Description (IMPORTANT - I linked the 3mf file that is set to pause before adding the top layers because it's the only way I know to expose the infill) If you are using a 220mm bed you will have to disable the prime tower for space. If…

3x5x5 Gridfinity Insert for 28 25mm 10ml Vials for Peptides or GLP's

3x5x5 Gridfinity insert that holds twenty eight 10ml vials, or anything else cylindrical that is smaller than 25mm This is used in a 3x5x9 Gridfinity box to hold 28 10mml vials. It has holes for magnets on the bottom. You can use it in a…

stackable 5x5 mechanical switch tester

Update: There is also a magnetic version of the switch tester now https://www.printables.com/model/943189-stackable-magnetic-5x5-mechanical-switch-tester The usual switch testers are normally just one plate, either way to big if you have…

5x5 Minichess set

This requires a multi-material printer. Please refer to the included gcode and project files for a reference for how to print the checkerboard pattern. Minichess is a Chess variant invented by Martin Gardner in 1969. It uses a small 5x5…

Corner Connector (40x40x40x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 40mm x 40m x 40mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…

Tikka long action 3,56'' AICS 10 & 6 round mag 6.5x55

6 round mag tested with over 300 rounds. 0 feed issues. 10 round mag feeds well in testing so far. (150 rounds tested) Printed with auto tree supports hotplate only. prusament PLA 0.16 layer hight 0.2 first layer 70% infill 4 walls spring…

Laser cutter standoffs/anchors for 1mm-7mm material (with strong 25x5mm magnet)

A compact magnetic riser designed to hold thin materials flat on a laser cutter honeycomb bed. The block contains a 25×5mm magnet that securely attaches to the steel honeycomb surface, keeping the riser firmly in place during cutting or…

Ammo box for cal. 7.5x55 (SWISS)

Box for ammo cal. 7.5x55 (SWISS), can hold 35 ammunition. Very useful for sport shooting 300m with Schmidt Rubin K31. For this Box you must add 8 parallel pins (ISO 2338) Ø5 h8x18 (if you can't find it, you can cut a bar of any matirial…

Bracket 45x45x5mm

Simple but sturdy bracket.

Filament Sample Card 85x55mm (Business Card Size)

I designed this Sample Card in a Business Card Size. The Fusion360 model is customizable.

Gridfinity Storage Box - Flat/Smooth Lid 5x5

Ich wollte einen glatten Deckel für die Gridfinity Storage Box 5x5 von Pred. @Pred Vielen Dank für Deine tolle Box. Da ich mich mit keiner richtigen 3D Software auskenne, habe ich den Deckel in Tinkercad überarbeitet. Es ist alles gleich…

1x1 Up To 5x5 Skadis Boards

Made using the parametric Skadis file, all sizes 60x60 - 210x210, i.e. 1x1 - 5x5

Vortex Strike Eagle 5-25x56 Zero Stop Rings

I modeled and printed some custom zero stop rings for my Vortex Strike Eagle 5-25x56. I figured I would post as I had seen some people asking about custom ones online when I was looking. I printed in PLA for now, but I am sure that it…

Corner Connector (60x60x60x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 60mm x 60m x 60mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…

6,5x55 Steyr Mannlicher ammo box. New design

I got a request for a 6,5x55 ammobox of the new model i make. The spacing is 50pcs/81,20x12,60mm between the insert top and bottom. Please read the size before printing. I made a o-ring to fit the lid but it's made for 2mm o-ring string…

Battletech stackable vehicle (half height) storage tray 5x5 regular size

Battletech stackable half height miniature storage tray 5x5, Stores 25 vehicles. Trays stack on each other (two trays stacked equal the size of one regular tray) It's stacking compatible with the vehicle 4x4 tray, 5x5 REG tray, 4x4 XL…

Corner Connector (50x50x50x5x5)

Depending on what you want to build this plastic one might replace metal original. Sides: 50mm x 50m x 50mm Thickness: 5mm Hole diameter: 5mm hashtag uploading old stuff If you're interesting in this thing, you might want to check those…

Bambu Lab - MAGNETIC Purge/Flush/Poop bucket for X1, X1C and P1P - 5x5 mm magnet - 125mm deep

the 125mm depth makes the the X1C or P1P fit on an Ikea shelf of 52 cm deep. use the standard setting of the original

Gridfinity stackable drawers 5x5x6

While I found some gridfinity drawers, none would be completely to my liking. My criteria were Sturdy to hold screws and nuts Stackable for easy extension Use as little filament as possible for faster prints and less costs The drawers do…

Driver Hex Bit Holder 5x5

This is a Driver Hex Bit holder with good fit that holds 35 Bits

2x5x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

6.5X55mm Swedish Stacking Loading Block

6.5X55mm Swedish stacking loading block. Category: Tool Holders & Boxes

Business card case 85x55

Prusa MK3s+: Material:PLA Layer 0.2mm Seam position: nearest Solid infill threshold area: 70mm2 Speed out perimeter: max 50mm/s No brim, no supports. You need to gently open the hinges.

gridfinity5x5-drawer-solidfront

Tired of drawer handles breaking the front honeycombs during assembly? If so, this eliminates this issue by filling the front drawer side solid.

Reloading tray .223 -> (243 / 6,5x55 / 308 / 3006 / 9,3x62 etc)

Reloading tray for all calibers .223 → Suitable for 243 / 6,5x55 / 308 / 3006 / 9,3x62 etc Steps/stair design, for easier access to the brass casings. Print in desired filament, no support needed.

Victorian Scrollwork Picture Frame – 5x5" (127mm) Ornate Round Photo Display

Bring a timeless aesthetic to your desk or wall with this beautifully ornate Victorian-style picture frame , featuring intricate scrollwork and a 127mm x 127mm (5"x5") square footprint with a circular photo window. Designed for…

1x5x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Picture frame (5x5 cm)

Just a small picture frame. Tested and verified only for use with pictures of my cat, but you can try other ones :)

Gridfinity Storage Box 5x5x6u with integrated hinge

Prototype remix of the Gridfinity Storage Box V1 by Pred, with an integrated, more robust hinge. The hinge leaves will also act as a base for standing the box vertically. I also removed the sweeps from around the circumference as I felt…

5x5 Mirror Cube Extensions for MFJS Meilong 5x5

Extensions to be glued to the pieces of an MFJS Meilong 5x5 to turn it into a mirror cube.

Rolltop Pillbox with 55x55x1mm Slots

With 2 Slots for 55x55x1mm foil packaged meds, or paper with Meds/Contact info. Reverse slots are Indented.

Hasselblad mask for 35x56 mm with sprocketholes

Maske für die Hasselblad V-Serie, zu platzieren über der Sucherscheibe. Die Maske hat den Ausschnitt 35 x 56 mm, wenn man den Kleinbildfilm mit den Sprocketholes belichten will. Gedruckt in PLA mit 100 % Füllung damit die Maske halbwegs…

6.5x55 SE Reloading Block

Print this in whatever material you like. There will be some bridging, so make sure your printer is capable of it.

Gridfinity test tube holders 3x4, 2x2, 3x3, 4x4, 5x5

Fed up of having test tubes loose in a box? how about a Gridfinity solution, use this for holding all our clean test tubes ready for use with testing the fish tanks for various chemicals. Fits into a 3x4 Gridfinity slot, if there is…

Gridfinity Base - 5x5 - Pegboard - 20 degree

This can be printed with a wide variety of settings. Just about any non-flexible material should work. I've typically used PLA with 4 walls, 10% infill, and a 0.6mm nozzle.

Gridfinity Bin - Hoto Cordless Air Duster & Vacuum (5x5x4)

A thing to hold the Hoto Cordless Air Duster & Vacuum (a.k.a. Compressed Air Capsule). Bin size is 5x5x4.

5x5 Slide Puzzle

Here is a 5x5 Slide Puzzle, more numbers are clearly better. As usual, my models are made available for commercial use. I humbly request 10% of profits if sold, but I have no mechanism to enforce this desire, and for toys given away for…

6,5x55 Swedish Mauser

You should use PLA because if you use PETG the firing Pin of your rifle could be damaged, if you dont use it in a rifle it doesnt matter.

Organiser Box V2 95x55x40mm

Organiser Box printet in PLA 0,2mm Speedprofile. No supports

25x50mm to 30x60mm Warhammer Old World Square Base Adapter

A simple base adapter for older Warhammer The Old World, designed to have just enough clearance for models whether you want to glue them in or leave them swappable, this design uses 3mmx1.5mm magnets to keep your soldiers in ranks. This…

Gridfinity Paint grid - Revell, Vallejo, Tamiya, Microscale 1x1 - 5x5

To organise your paint bottles, a Gridfinity storage solution for: Revell Aqua paint bottles - 34x34 mm Tamiya 10ml bottles - 36 mm diameter MrHobby 10 ml bottles - 36 mm diameter Vallejo bottles 35/60 ml - 36 mm diameter Microscale…

Cubic Pile 5X5

Inspired by a Sol LeWitt piece at the Detroit Institute of Art. Category: Math Art

3x5x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Scharnier 201,5x55x16(7) L-B-H

Stabiles Scharnier mit Inbusschraube M5x50 als AchseStabiles PLA oder PETG 100% Infill

4x5x5 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

Picture Frame Castle (4 Pictures 5x5 or 1 Picture 9x13)

Two versions available: One picture 13x9cm Four pictures 5x5cm Prints without support. Friction fit, but can be glued for additional strength.

1/4" (6mm) Firework Star Cutter 5x5

Mold to cut 1/4" (6mm) cube stars for fireworks. Makes 25 at a time. Make your star compound into dough and roll out ¼" thick. Use the grid cutter with the holes by pressing it into the dough like a cookie cutter. Use the other piece like…

6.5X55mm Swedish Vase Mode Stacking Loading Block

6.5X55mm Swedish Vase Mode stacking loading block. Revision History: 05/14/2023 - Fixed *-50 and -25 slot cut into lip. Print Settings Rafts: Doesn't Matter Supports: No Resolution: .2 Notes: Print in Spiral Vase Mode with double your…

Gridfinity MK4 Nextruder Nozzle Holders in 2x3x5 and 1x5x5

This is a Gridfinity-compliant and stackable nozzle case holder. It holds four Prusa Mk4 nozzle holders as they come from Prusa. In this 3mf file, I have put the text next to each nozzle slot for the size and material of the nozzles, but…

Fnirsi HS02 Soldering Iron Gridfinity Holder With Magnets. 3x5x5u

Extra space for holding solder, wick etc. I have changed the design a bit from the one in the picture. added a notch for easier removal of the soldering iron, made the tips holder a bit tighter as some of mine were lose. Also removed the…

Subaru CV Axle Seal Driver (35x50x9)

This model is used to help drive in a Subaru CV Axle Seal (35x50x9mm). Be careful not to drive the seal in too far!

Japanese Fish Scale Pattern PAtch 5x5cm

I designed this to be used as a patch on a Evergoods backpacks velcro section (5x5cm). I just used some adhesive velcro on the back side biving it a nice contrast, as I have no multi-color printing. I have uploaded a model with that…

6.5x55 SE Attachment for Region 420 Funnel System

I made an insert for my 6.5x55 SE . I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters.

Panasonic WhisperValue 2.5x5" oval to 3" duct adapter

Install a 2.5" x 5" oval fan outlet like the one on the Panasonic WhisperValue to a 3" duct

Scalable Seed Pixel Matrix with 5x5 Pieces

Print side pieces and corners separately in the number required. Group the center pieces after importing into slicer and move to area where required. I have a small printer so can only do one at a time and the reason for 5x5. The pieces…

5x5 Rubik's Cube

A fully printable 5x5 Rubik's cube , scaled to 90mm (150% of the standard size)!!!! - All parts are printed separately — No AMS required . - This is a fully functional mechanical puzzle with smooth turning mechanism that requires assembly…

20rd lockable Ammo Box 6.5x55

Lockable ammo box for 20 rds. of 6.5x55

Customized Parametric Honeycomb containers 5x5

Customized version of https://www.thingiverse.com/thing:722125 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=722125 Print instructions Category: Containers Instructions Using the following options: ID…

LACK Table Wrench (55x55x45mm)

When assembling a large quantity of LACK tables from IKEA, screwing in the feet will become really hard on your hand. Therefore you can use this handy wrech to help you install the feet. This wrench has an inner diameter of 51x51mm which…

5x5x10 Bin | Lable | Gridfinity | Deskorganizer | Tool | select2stertPrint

I used the GridfinityGenerator | Fusion 360 | Autodesk App Store that is made by Lev Mishin The basis of Gridfinity a created by Zack Freedman Gridfinity: Your Ultimate Modular Workshop is FREE! I want to make the Gridfinity System more…

PTFE Tubes magnetic connector PC4-M6 5x5mm magnets

Magnetic connector for PTFE tubes: 6.4mm thick 5x5mm round magnets PC4-M6 coupling easy to grip shape low profile

Golf ball pyramid stacker 5x5

Larger model, 218.5mm x 218.5mm.

Ammobox/Munitionsbox GP11 / 7.5x55 Swiss

Sehr stabile und praktische Munitionsbox für eine Trainingseinheit auf dem Stand. Die Munitionsbox fasst 50Stk. GP11 (7.5x55 Swiss) Patronen. Herausnehmbarer Patroneneinsatz, falls mal etwas in die Box fallen sollte. Die Höhe des…

Box for Hasselblad mask for 35x56 mm with sprocketholes

Konnte keine passende Schachtel für die 35 x 56 mm Maske für die Hasselblad V-Serie finden, also hab ich eine gemacht. Innenabmessungen: 60 x 60 mm, 3 mm Höhe. Gedruckt mit PLA mit 0,1 mm Schichthöhe wegen der feinen Nasen die in die Nut…

Scharnier 141,5x55x16(7) L-B-H

Stabiles Scharnier mit Inbusschraube B5x50 als AchseStabiles Scharnier mit Inbusschraube B5x50 als Achse PLA oder PETG 100% Infill

Protecteur de/ Porte carte 85x54.

C'est un modèle qui permet de rangé une carte pour la protège tout en laissant un espace pour pouvoir effectuer la lecture d'un code bar/QR code

6.5x55mm Swedish/6.5 x 55 Mauser-Krag Cartridge

Vacuum block TV 145x55x50 SCM/Morbidelli

Cups for SCM

5x5 Rubik's cube NO STICKERS

This is a remix of the 5x5x5 Rubik's cube by saulquinn, but this one requires no stickers and no glue, and does not need a multicolor printer! You just snap in colored tiles! Turning is decent, though sanding and grease/lubricant helps. I…