Counting matching models…
With PrusaSlicer slice the model with a layer height of 0.2mm. Add a pause command at layer 63 (12.6mm layer height). Don't be confused: The pause command takes effect at the beginning of the layer, the slicer shows previews of the…
Model of the original wheel hub cap for VW T4 (not 100% identical). Part number 7D0601151. Two versions available: Complete model that will need supports. Model split in two halfs that doesn't need supports but needs to be glued together…
For those that follow, you will be glad to know that I have made this without telling the full build story, as I did with the last build. Hopefully I have learned from my last experience/struggle, (see "S160 Loco"), and there will be…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is a highly detailed and accurate model of the Bitaxe 601 Gamma manufactured by Opensourceminer. The stl can be used as a dummy, but there's also a .step file included with a fully populated pcb, heatsink, Noctua fan and even screws.…
This model is compatible with the lego system.
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max. The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer…
printed in PETG translucent print with supports
04/08/2025: I was going to print a barrel cooler using the 5015 fan when I saw the 6015 fan was a little cheaper and flowed 50% more air (2.9cfm vs 4.5cfm)! That's a big jump for only 10mm growth in size. These 3D printer fans flow much…
This model is compatible with the lego system.
Malá poklice přes šrouby.Já tiskl na dvě části 16,5mm řez, část 0.1 mm ABS a vnějšek 0,2 díl : 7D0 601 149 A
I designed this model because I couldn't find any like it with a fan and snap-fit features for my new 3D printer. The top and bottom covers snap/click into place, eliminating the need for screws there. However, you will need 6x M3x6mm…
Only a 6015 blower fan model. If you need more layer cooling, try this blower. Category: 3D Printer Parts
Two RD60xx PSU in one case using a single 1000W power supply as power source (800 & 1200W are also available, see link below). Support my work For non-Prusa parts and filaments, check out 3DJake ( International , UK , Germany , France ).…
The film door latch on the Nikon N6006, N5005, and N4004 (F-601, F-401X, F-401) is notorious for breaking. Replacements are often over $10 for a piece smaller than a fingernail, so I modeled one and want to release it for free! This…
This model allows you to mount two 6010 fans to your BTT Octopus (Pro) control board without blocking any connectors (except the stepper drivers). This provides PLENTY of cooling for everything on the board as all the critical components…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
To download the box of my idea and project for the laboratory power supply riden rd6012, the box fits a dedicated 800W power supply NVVV, the top of the housing is folded out for quick access to the power supply. Box in two options,…
This model is compatible with the lego system.
BitAxe Gamma 601 Enhanced Stand This is an upgraded stand designed for the BitAxe Gamma 601 miner. It improves stability and cooling compared to the original stand design. Key features: Larger, more stable base to prevent tip-overs. There…
Solder fume extractor with an LED light and a carbon filter for filtering out bad fumes. Designed to be modular so technically any other 60XX fan will fit. I have included a Cutout model so that it is easier to cut out the filter shape,…
Print with PET-G horizontally Nozzle: 0.25 Layer height: 0.08 mm Supports: yes
These Rpi's aren't cheap nowadays so why not provide some over extensive cooling for them? This is my personal use case, but these fan mounting plates can be used for other purposes as long as they are mounted on 2020 or 4040, or 2040…
Redirects the air straight up instead of out. The longer model is for the three center sections, the shorter model goes on the ends. There's a slight gap at the very ends because the outer edges aren't perfectly vertical. Though they…
When using a sander, I prefer to connect it to a shop vacuum to keep the dust in my shop under control. The collection bag provided with the Ridgid R2601 random orbit sander can't collect all the dust and a shop vac (equipped with a HEPA…
Riden power supply RD60xx panel case to keep your panel on your desk and hide the actual supply under your desk. Print best using PETG as PLA might get soft when it heats up. It's best to print it facing front of the panel (open wall)…
This mounts two 60mm fans to the center bed support of the Voron Trident. It will mount them flush to the bottom in order to not take away any Z travel. It could be used to flush mount any 60mm fan on a typical 2020 extrusion. Two step…
This is a drop-in replacement for the original dust nozzle. You need to transfer the original o-ring to the new adapter. I advise to print the adapter with the C35 side facing downwards. It is possible, that this adapter also works with…
Dado stack insert plate for an 8" dado stack on a kobalt TS10601 jobsite table saw. I believe the TS10602 is the same. You must modify the riving knife in order to use this plate and a dado stack on this particular saw by disassembling…
part I used is: -3M bumper rubber feet -Pomona 2854-0 and -2 Banana Jack Connector -RD6012P (I haven't tested if other RD model fits) -One M2.5 countersunk screw I also made a single part variant
RIDEN® RD6012W USB WiFi DC-DC EPP-500-48 MEAN WELL - https://www.tme.eu/sk/details/epp-500-48/otvorene-zdroje/mean-well/ 4304.4023 SCHURTER - https://www.tme.eu/sk/details/4304.4023/konektory-iec-60320/schurter/ CP30090 CLIFF (only power…
Honeycomb Storage Wall holder for KAIWEETS KM601 multimeter (also branded as AstroAI MUS10KRD). Holder Print upside down as in the file Supports touching buildplate Cable wrap Print two Standing upright No supports needed Enable brim if…
Since the size of the RD1200-68 power supply is 242x125x65, the enclosure takes the whole printed area on Prusa MK3 250x210. So, that put all components in very tied position. RD-6018 size: 167x81x(69 with button) outside 160x74 cutout…
The nozzle at the end of the windshield washer fluid pump broke on my Trabant. This is were the hose connects to the pump to send the fluid to the sprayers and spray the windshield. The pump still works just fine, but with no hose…
Lego Army Trabant P601 Tramp 1976
Vytiskněte si ho velký tak, jak chcete :), jenom tiskněte na lepší kvalitu jinak by rohy mohly být ostřejší.
Update 20-02-2022 - now a variant with a stronger foot, as the first design was a little fragile Designed this battery tray, which replaces the existing servo mount. This allows for bigger Lipos to be installed, above the servo. (This…
Printing in PLA, with 0.1mm layer thickness and support. For the settings check the 3mf file.
Desktop stand for Xiegu X6100 with a 6010 12v cooling fan mounted behind and cooling channels behind the radio. This remix idea from on2on and jeff_j3ffr3y. STEP and STL are modeled at 1000% due to an error in original STL import before…
Riden RD6018 Basic Model
Ovo je trabant 601 u mjerila TT, H0, N i Z. Znam da sam to mogao raditi u onshape-a ali mislim da takve stvari jesu bolji iz AI-a. Ja će više volim kad radim model ja, ne AI ali nekad je će AI bolja. TREBA SUPPORTE!
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro (V1). The Direct Drive Extruder will work with both the shorter Ender-3/CR-10 All Metal Hotend (4-finned) as well as the longer CR-10S Pro All…
Käfer, 914, Typ2 Radmutternkappe SW 19
Info This is case for DC boosters and specially for XL6019 DC booster. For mouting i used M3X5mm screws. Cover have holes for cooling you can mount mini fan for extra cooling but you must modify the model. I uploud project file from…
The latch of the battery compartment lid is often damaged. Here is the solution.
Very minimalistic enclosure and stand for BitAxe Gamma 601. Well ventilated and good for overclocking. M3 heat inserts are used for the fan casing that is attached to the enclosure. M2 heat inserts are used for the enclosure to fixate the…
A case to house two RD6006 units and a PSU to drive both. [EDIT 28/05/20] - the RD6012 should fit as well, as the dimensions appear to be the same. I say should, as I don’t have one to try... but the sizes on the RD tech site are the same…
Sci-fi themed spaceship. HT-601 tactical combat space vehicle. This is an original design not related to any franchise. *Dimensions: 35x40x12mm *Scale 1/250 (6-8mm). *Includes hollow version with brackets. *Includes 40mm flying base and…
Casing for DC-DC Voltage converter Converters from Amazon: Amazon.co.uk : Youmile XL6019 DC-DC Buck Boost Converter
lego 4215 73878 23405 60601 38320 51266 60593 51239 60594 60598 60607 60608 60614
I have been printing a lot of ASA/ABS and ran into an issue where Klipper was throwing a code saying the bed couldn't keep up to temperature. i noticed that the SSR was very hot to the touch and needed some active cooling. i threw…
Triangle Printed from PETG Raft layers: 2 Overhang treshold: 0 Custom supports to easy clean the parts Perimeters: 5 Top layers: 8 Bottom Layers: 6 Sealing for triangle Printed from Fiberlogy MattFlex 40D Prusa Slicer Standards If you…
Remix with case being 6mm deeper to accommodate the new P(W) series. Printed with back on build plate with support everywhere
Wall mounted holder for the slicing disk and the drive arbor of a Ninja BN601 Food Processor. It should hold things pretty well, but I make no safety claims/guarantees.
3D printing protective sleeve shell skin housing for Futaba R6014 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 15 Filament: Spectrum PLA / TPU / PET Category: R/C Vehicles
Just a really simple 6010 fan mount for 3060 extrusion. The Voron Switchwire calls for some double sided tape to mount a 6010 fan, and I figured I may as well just design a part that can be printed quickly and do the same job, while…
This is a replacement panel grill mount for my Bose 601 Series II Direct Reflecting Speaker. One of my speaker's original grill mounts broke cosmetically and so I modeled and 3D printed my own rather than shelling out $80 for a "new" one…
Fan Shroud Adapters that can be used to attach the stock metal Ender 3 max fan shroud to the M2601 Direct Drive extruder. The PTFE Guide Tube Bracket will align the PTFE tube with the Filament Runout Sensor of the Ender 3 Max.
Remix from @sterinli27 s Edge Bracket for “free” under desk mount. So this is a symmetrical version. Printed in ABS black on an BambuLab X1 Carbon
A little expansion top-hat for the Inter-Tech ITX-601 case, the mounting mechanism is a bit awkward but for my first crack at case expansion it's fine. The extension bay is for standard 5.25" units, in my case a 4-bay 2.5" drive carrier.…
Short version (original here ). Air outlet directed upwards (or not)
Inspired by Valerie's work. Not better, just using fans I have. Stock 4010 for Host cooling and 6010 for the drivers. Not intended to work with the stock covers (but may fit), my printer is well away from kids and kitty fingers. Host fan…
loose ground coffee cover for philips coffee machines For models 1200/2200/3200 For me only like a case. I don't use the hatch opening printed on creality ender 3 v2 neo printer material petg filling 20%
This is a remix of Randomswede's excellent quick click adapter for Ryobi router. It accepts 2.5in dust collection hose, and also include a printed thumbscrew that can help mounting the adapter to router For printing place the hose side on…
PTFE tube mounting bracket that comes with the M2601 Direct Drive Extruder.
The Fan Block Raspberry Pi cases were built to house a 6015 fan, but someone very reasonably pointed out that plenty of people have 4010 fans lying around as remnants from old printers. So, I made an unnecessarily complicated adaptor! The…
This is the wire retainer for Diatone Roma F5 FPV Quadcopter. This holds the 12Ga battery leads to the aluminum standoff. This may fit other Diatone FPV Quads. Leave a commit if anyone needs the 14Ga version.…
Thanks to Tareku for the PSU case cover. I wanted a case cover without a fan grille—since that also generates noise—and a quieter fan. The mounting position for the 92 mm fan didn't seem ideal to me, as there are no vents in the printer…
This is a replacement stronger propeller and nose cone for a Quick Build Mustang P-51D Model Kit (J6016). The original propeller lasted just minutes in the hands of a four year old. This design replaces both the propeller, nose cone and…
Use PETG or strong material, no support needed.
Bitaxe with 92mm rear fan forcing air over the back of the board and out in the front Enjoy the build! If this saved you some tinkering time or helped your farm grow, a tip is always appreciated. Crypto addresses in my bio. Happy hashing!…
Upgrade part for RELIFE RL-601L quick release PCB fixture for improved versatility and stability in various soldering tasks. This easy upgrade increases the clamp height, enabling you to securely hold PCBs with taller components,…
Here is a box for a DC boost/step-up (or even a step-down buck-converter) based on the XL6019 circuit that is 50x28mm in size. This has been designed to house the converter and a standard DC jack socket to fit on one end: repurpose those…
Clip-in motherboard standoffs which were modeled after the original metal clip-in standoffs which came with a Lian Li PC-6010 case. Probably fits the rest of the PC-60 series. And more? Has holes to fit M3 bolts. Please pardon the…
Head Phone holder that slides onto the upper rail of Asus ROG Strix Helios GX601 PC case.
Der Schalter von unserem Siemens Dunstabzug ist gebrochen und gibt damit den Blick auf die hässlichen Microswitch frei. Nachdem ich keinen Schalter mehr (muss wohl ca. 14 Jahre alt sein) auftreiben konnte habe ich mit Fusion 360 ein…
You need to print upside down and supported, there is a supported version in the photos.
Convert 6010 axial brushless fan to 5010 fan
As I had a few 8mm steel balls over from another project, I designed this 16014 ball bearing to suit the open source ciclop scanner bed. Uses 12 balls and is easy to assemble as the ball cage just clips into place.…
Clips onto clamp lever but does not interfere with lever movement. Uses two 12mm x 3mm neodymium magnets. Thicker magnets can be used. Nothing particular about printer settings but a brim or raft may be needed for good adhesion.
based on sovol original could be printed in PETG or ABS. I printed in PETG-CF 4 pcs M3x3 inserts are needed
Damit der Hahn beim klemmen nicht bricht, sollte er mit hoher fülldichte und mindestens 2 Wandschleifen gedruckt werden.
Philips NT 316010 Series 3000 Hair Shaver Holder It works great. Have Fun, don´t hesitate to give a like or post a make picture. Open for any improvement ideas.- just send me a message. Print Settings Printer Brand: Anycubic Printer:…
I wanted a super small case for my RD6018 power supply that had a built in step-up converter but also allowed for direct input. This way i can plug a battery into the power supply and use it remotely as well. The components i used: The…
I recently tried to use my shop vac for dust collection from my sander. While the hose almost fit on the sander, it didn't quite fit. So I designed this part to ensure a solid connection on both sides. Printed vertically in PLA, no…
A stepless angle bracket for mounting 6015 COB LED strip. This is a component of an ongoing project, for providing adjustable LED light sources. However, I think this can be practical in a variety of cases, the two M2 holes in the base…
VW T3 Vanagon loudspeaker fitting / Halter Lautsprecher Decke VW T3 Caravelle 251035429 / 8 601 360 017
A nice little case for the XL6019 DC boost converter. It caters for a snap-in USB C port and has strain relief for the wires. The lid is friction fit allowing easy access to adjust the voltage when necessary. It also has holes for heat to…
This clip provides a friction fit stopper to replace the elastic when it fails. No replacement elastic required. Just clip on and adjust to the required position.
Ersatzteil für eine gebrochene Kupplung zwischen Drehknopf und Thermostat für Siemens Elektroherd HE330550/01. Ist, wie am weißen Originalteil zu sehen, ein Mitnehmer abgebrochen hat die Kupplung zu viel Spiel und die Temperatur lässt…
My right fridge door was opening when the left door closed so I designed this part to replace the existing door closer to be stronger. This replaces the original part (MJB62830601) and uses the existing screw. Compatible with model #:…
Needed to replace the broken clip the installer had “repaired” with duct tape. No models existed online and I was unable to purchase a single new clip from anywhere! Some quick measurements of the unbroken clip yielded this. Print at 45…
Náhradní díl pro vůz Trabant 601 combi. Jedná se o plastový nýt, který se zasouvá do C sloupku, pro uchycení hliníkové mřížky. Doporučuji tisk z PETG nebo jiného teplého odolného materiálu. Tiskl jsem při výšce vrstev 0,12 mm tryskou 0,4.…
This is a replacement lid for the TuYa TS0601 Thermostat I made because mine was broken. The little metal piece is straight from the original lid, it just clips onto the provided nubs. Printed with 0.12mm layers with Sunlu PLA+ White on…
jpgdesign3d.de 8,5Jx19 ET48 4F0 601 025 L 1H7 Einfacher 3D Scan einer BBS Speedline Felge. Nur die Vorderseite. Simple 3D Scan of BBS Speedline rim. Just the front of the rim.
This is a mount for a Chihiros Series A 601 for my Aquatlantis Fusion 70. I found this on Thingiverse https://www.thingiverse.com/thing:5136910 but it was too short and a bit too loose. So, I redesigned it from scratch to better suit the…
This ia a HoneyComb PSU COVER to replace the original cover. Compatible with 60mmx15mm fan or slimmer. Fits most of the 3D printers Post-Printing For the installation you will need: 4 M3x4mm inserts 4 M3 x 6mm screws Category: 3D Printer…
![M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698885/images/5548157_c7549b92-7fcb-44ea-9ad1-861608b9eaeb_57d87105-28a0-4e7f-aad3-ed996f07f4f7/image2.jpg)
![Display Stand for LEGO City Passenger Airplane 60367 / 60262 / 60104 / 60022 [last update 7.10.2023]](https://media.printables.com/media/prints/606587/images/4822115_a6e78fc1-c2a2-4011-bdf4-8805c8ccdeb6_e156ec04-83f1-4f46-b5e5-fd288b717e49/60367-5.jpg)
![M2601 CR-10S Pro [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698867/images/5488428_cf6040e2-edf1-42df-a822-2df0fbd212bb_dcaf0d21-3a00-4c2d-8acc-0617717dbed8/image1.png)
![M2601 Ender-3 Max [Micro Swiss Direct Drive] - Fan Shroud Adapters](https://media.printables.com/media/prints/698905/images/5488575_b3ec441a-fa86-441d-8a5c-c6693dce5f9f_a793c57e-37b8-4077-901f-6ce7f3daed4b/fan-shroud-adapter-render-1.png)
![M2601 Ender-3 / CR-10 [Micro Swiss Direct Drive] PTFE Bracket](https://media.printables.com/media/prints/698895/images/5548106_4bd8e09f-8934-414e-a68b-3321cb85ff51_6909f607-816b-4933-b737-e3a507dc1cfc/image1.jpg)
