P
PrintablesNunuz57
Ikea Skadis bottle holder 35mm (type Vallejo 60ml)
Bottle holder for a diameter of 35mm. Type Vallejo 60ml : https://amz.run/5aAt
- Downloads
- 634
- Likes
- 93
- Rating
- 4.8
Search results: 60ml
Counting matching models…
P
PrintablesCaptainC
scoop for washing powder 60ml
I recommend printing it in PLA with the following parameters: 4 walls 0.15 layer height no supports
- Downloads
- 534
- Likes
- 37
- Rating
- 4.83
P
PrintablesMonkey Prints
Measuring Scoop for Washing Powder | 60ml and 20ml
Two sided measuring scoop This model is a two sided measuring scoop with a volume of 60ml and 20ml for example washing powder. Most washing powders require a dosage of 60ml or 80ml. With this scoop it very easy to get the perfect amout.…
- Downloads
- 447
- Likes
- 70
- Rating
- 5
P
PrintablesTheCraftyLycan
Stacking 60ml Paint Rack
Stackable paint rack for 60ml Apple Barrel and Folk Art paints. This is inspired by another design I cannot find anywhere, however, it is built entirely from scratch in tinkercad. I tried for a minimalist design to get the most bang for…
- Downloads
- 387
- Likes
- 48
- Rating
- 5
P
PrintablesMarkus Schmidt
Farbenständer Vallejo 60ml / Paint Storage Vallejo 60ml
Farbenständer für Vallejo 60ml Passend zu dem Design des "Paint Storage Vallejo" Farbenständers (vielen Dank dafür) habe ich einen Ständer für die großen 60ml Flaschen entworfen. (der Loch-Durchmesser ist ca. 37mm) Update 29.12.20 Ich…
- Downloads
- 333
- Likes
- 55
- Rating
- 5
P
PrintablesFidde_
Paint holder for 60ml (35mm) bottles
Needed a better option than a plastic box for my Createx paint bottles to rattle around in. This holder will of course hold any bottle with a diameter of 35mm or smaller. The model is designed to be printed with either two 0,6mm or three…
- Downloads
- 248
- Likes
- 17
- Rating
- 5
P
PrintablesLama
60ml Syringe Grip
60ml Syringe Grip: Better Handling for Easy Gavage Feeding or thick liquid (resine like) My 60ml Syringe Grip makes it easier to use the plunger, which can sometimes be challenging during gavage feeding. It provides a better grip for…
- Downloads
- 246
- Likes
- 15
- Rating
- 0
P
PrintablesOkamisu
IKEA Skadis Vallejo 60ml bootle holder
Skadis holder for 60ml Vallejo bootles. BASE, Aitbrush thinner and the others
- Downloads
- 227
- Likes
- 28
- Rating
- 5
P
Printablesdziobu
Philips Avent 260ml bottle handles - large
Larger version of "Philips Avent 260ml bottle handles". Fits only Philips Avent 260ml bottle. Printed with PET-G. Category: Kitchen & Dining
- Downloads
- 214
- Likes
- 43
- Rating
- 4.75
P
PrintableseSeL
Vallejo, Army Painter, Reaper Paint Bottle Organizer 17ml + 60ml
Designed for eight 17ml (25mm) dropper bottles, one 60ml (36mm) bottle and eight brushes. ---------------- Für acht 17ml Flaschen, eine 60ml Flasche und acht Pinsel.
- Downloads
- 99
- Likes
- 18
- Rating
- 4.5
P
PrintablesSTxS
260ml Can storage dispenser "First in - First out" / Lebensmitteldosenlager
Material: 310g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
- Downloads
- 85
- Likes
- 23
- Rating
- 5
P
PrintablesRiedie
Dual Measuring Spoon 60ml 40ml
Twin Messlöffel mit 40 ml und 60 ml. Zum Beispiel zur Dosierung von Waschmittel. Twin measuring spoons with 40 ml and 60 ml. For example, for dosing washing powder.
- Downloads
- 83
- Likes
- 9
- Rating
- 0
P
PrintablesExeu
Airbrush 60ml/32ml/30ml paintrack
Paintrack/Paintholder for 25 - 60ml airbrush paint bottles. To save printtime i printed mine with a 0.6mm nozzle and 0.4mm layerheight. Infill 15% and used “Combine infill every 2 layers” For 17ml bottles see:…
- Downloads
- 80
- Likes
- 9
- Rating
- 0
P
Printablesgrahampheath
Paint Shaker, Drill Mounted, Tibu Style, 60ml bottles
Following the advice of other makers you may want to increase the scale of the spinner. When printing in PETG I'm not sure I'd say it's necessary and a too-snug fit will prevent you from swapping the holders. But if you want a very firm…
- Downloads
- 77
- Likes
- 10
- Rating
- 5
P
PrintablesChristiaan du Toit
NATO 60ml Pepper Spray Bicycle Mount
This is a holster for 60ml NATO pepper spray cans to be mounted on a bicycle.
- Downloads
- 72
- Likes
- 22
- Rating
- 5
P
PrintablesJoe
1/4 Cup | 60ml Storage/Measurement tube containers, using caps from Dairyland milk jugs
To complete these builds, you must have 2 caps from 4-Liter jugs of Dairyland brand milk. These storage/measurement tubes are designed for reusing the caps from 4-Liter jugs of Dairyland brand milk. The storage tubes are marked with…
- Downloads
- 49
- Likes
- 7
- Rating
- 0
P
PrintablesYumiko
Ouvreur bouchon ALCLAD 30ml 60ml, ALCLAD paint cap opener
Allows easy opening of 30ml and 60ml ALCLAD paint bottles when the cap is stuck. Permet d'ouvrir facilement les bouteilles de peinture ALCLAD de 30ml et 60ml quand le bouchon est coller. Print Settings Printer Brand: Creality Printer:…
- Downloads
- 45
- Likes
- 9
- Rating
- 5
P
Printablesondrasadibol
odměrka 60ml
používám na čistící přípravek do vytíracího robota
- Downloads
- 38
- Likes
- 2
- Rating
- 0
P
PrintablesSkippyMcSlappyPants
BD 60mL Syringe and G-Tube Extension Holder
This was specifically designed to work with a BD 60mL syringe with catheter tip (REF309620) and MIC-KEY Tube Secur Lok Extension Feeding Set (REF 0121-12). If you hold the "G-Tube extension" part when feeding, there is no way for the…
- Downloads
- 36
- Likes
- 9
- Rating
- 0
P
PrintablesGerman Nicolas Gomez
Tope de Seguridad para Jeringa de 60ml - Solución para Drenaje Postoperatorio - 60ml Syringe Safety Stopper - Postoperative Drainage Solution
Este tope de seguridad impreso en 3D está diseñado para jeringas de 60ml y se utiliza como parte de un sistema de drenaje postoperatorio improvisado. Al proporcionar una solución más eficiente y económica, este diseño reemplaza la…
- Downloads
- 28
- Likes
- 6
- Rating
- 5
P
PrintablesSpdQbr
60ml Monoject syringe flange
One of my bunnies is under the weather and feeding the thick Critical Care through the syringe was difficult because of the very small flange on the syringe. This gives a better grip so it's easier to generate the opposing force to the…
- Downloads
- 24
- Likes
- 6
- Rating
- 5
P
PrintablesGeekforlife
60ml bottle squeezer ver.1
This bottle squeezer was designed for a 60ml bottle with a circumference of 30mm it holds the bottle well and gives a bit of leverage. I'm sure it can be sized up or down to fit other bottle sizes. I called this version 1 because I plan…
- Downloads
- 24
- Likes
- 6
- Rating
- 0
P
PrintablesJakub
Simple bottle holder fo 60ml bottles
Simple bottle holder fo 60ml bottles used for e-juice bottles. Bottles are around 30mm in diameter.
- Downloads
- 20
- Likes
- 0
- Rating
- 0
P
PrintablesRedPhanthom
Basic 60ml paint holder
Basic 60ml Paint holder. Was looking around for something very simple and threw this together while I also learn how to make designs. Platform base is 3mm thick. The height of the rim holding the paint bottle is 15mm tall. Print Settings…
- Downloads
- 19
- Likes
- 0
- Rating
- 0
P
PrintablesMiquel
Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)
Strong bottle holder for Ikea's Skadis peg system. Holds three bottles: 2x of 37 mm diameter (like AK's 100 ml bottles). 1x of 33 mm diameter (like AK's 60 ml bottles). Uses six pegs for better strength. How to print: Print on the side…
- Downloads
- 18
- Likes
- 3
- Rating
- 5
P
PrintablesGoyetus
Vallejo 60ml bottle holder (ArteDeco version)
This is a minimal holder to get all your vallejo 60ml bottles together and always up !!! You have three versions: - 8 bottles (4 for row) - 4 bottles (2 for row) - 2 bottles (2 for row) You can remix the stl as you want.
- Downloads
- 18
- Likes
- 2
- Rating
- 0
P
PrintablesJoshua Paterson
60ML Eliquid Bottle Holder
Made to fit Chubby Gorilla however it should fit any 60ml e-liquid bottle. Made at an angle so it can slide in a shelf
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesATinyGreenCell
Magnetic 60mL Bottle Holder for Orbital Shakers
Materials PLA Filament 15x2mm Magnets 60mL Polypropylene Bottles Foam Identi-Plugs Black Silicone Sealant Build Instructions Print the holder (I print in 0.3mm Draft mode on Prusa Mk3) and/or edit to increase bottle slot count via…
- Downloads
- 14
- Likes
- 1
- Rating
- 0
P
PrintablesEvolved Origins
Sistema Ultra 460mL and 920mL Desiccator Rack
Needed a container to keep moisture sensitive material dry but didn't have silica gel packets laying around. This is best suited for use with loose silica or molecular sieve beads (dia. greater than 2mm). There is a 3mm hole in the middle…
- Downloads
- 10
- Likes
- 2
- Rating
- 0
P
PrintablesRob
Stackable paint trays for 60ml bottles
this is a model I have done to store the 60ml 2 fl oz bottle of acrylics, this comfortably holds 20 bottles and can be stacked also, printing this either 100 percent or I used 15 infill with cubic seems to be strong enough to use please…
- Downloads
- 1
- Likes
- 0
- Rating
- 0
P
Printables
260ml Can storage dispenser "First in - First out" / Lebensmitteldosenlager
Material: 310g PLA+ Druckereinstellung: Layerhöhe 0,2 mm / Infill 5 % honeycomb / Support Tree at Parts P3a, P3b Zusätzliches Material / additional material: Spax mit kleinem Senkkopf / chipboard screws with small countersunk head 3,0 x12…
P
Printables
60ml Syringe Assist Tool
Adapter to fit a 60 ml Syringe on a Harbor Freight PITTSBURGH 4 in. Ratcheting Bar Clamp. I printed the Jaw rotated to sit on the chamfer with 5 walls as this improves the strength. my tests showed it push's about 20 Lbs. of force on the…
P
Printables
Jar with Lid - 60ml
Jar with Lid to fit small parts/objects or creme etc… The lid need to be embedded the first time, by slowly twisting the lid a few time back and forwards till it's fully closed. Print without support and layer height of 0.20
P
Printables
Acrilex 60ml Paint Holder
Acrilex 60ml Bottle Paint Holder This is a simple model for storing the 60ml paint bottles from Acrilex, since i didnt find any models of something like it Material to print with: PLA or PETG
P
Printables
Vallejo 60ml bottle holders multiboard push-fit
I used 3 walls, 10% grid infill and the filament in the images is PLA-CF from flashforge.
P
Printables
60ml Syringe Assist Tool
Adapter to fit a 60 ml Syringe on a Harbor Freight PITTSBURGH 4 in. Ratcheting Bar Clamp. I printed the Jaw rotated to sit on the chamfer with 5 walls as this improves the strength. my tests showed it push's about 20 Lbs. of force on the…
P
Printables
Tommee Tippee baby bottle (260ml) feeder wall clamp
I created these clamps in smaller parts so they can be printed easily on compact 3D printers. The clamp can hold the bottle securely by the neck, or it can be used as a simple drop-in holder. So far I know they work very well with the…
P
Printables
Gridfinity 50/60ml Bottle Holder
Small Gridfinity bin for 50ml/60ml bottles. 30mm diameter bottles. Designed for a nice loose drop your bottle in, but holds your bottles. Nano Polymers, Vape Juice, anything in these standard 50ml/60ml bottles. Features a beveled hole for…
P
Printables
Philips Avent 260ml bottle handles
Fits only Philips Avent 260ml bottle. Printed with PET-G. Category: Kitchen & Dining
P
Printables
Measuring Cap 160ml for Vax 1.5Litre Ultra+ Cleaning Solution
The old Vax brand cleaning solutions came with a 40ml dosing cap which was ok but still needed 4 capfuls per tankful of cleaning solution. Then I bought their Ultra+ 1.5L cleaning solution and discovered that the cap is only about 16ml,…