1 / 2
Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Strong bottle holder for Ikea's Skadis peg system. Holds three bottles. 2x37mm + 1x33mm. For AK bottles/pots.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 1
- Views
- 144
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Strong bottle holder for Ikea's Skadis peg system.
Holds three bottles:
- 2x of 37 mm diameter (like AK's 100 ml bottles).
- 1x of 33 mm diameter (like AK's 60 ml bottles).
Uses six pegs for better strength.
How to print:
- Print on the side with supports as shown in the pictures for strength.
- Design is optimized for 0.4 mm nozzle but would work on 0.6 mm.
- Use the 0.2 mm or 0.25 mm STRUCTURAL preset.
- Tested with infill to 50%.
- Recommended PETG, but PLA should still hold well.
- Pre-supported Prusa Slicer project included, as well as gcode for MK4S and PETG. Supports are easy to remove.