1 / 2
Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK) — zdjęcie 1
1 / 2

Ikea Skadis Three Bottle Holder (2x 37 mm/100 ml/AK + 1x 33mm/60ml/AK)

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Strong bottle holder for Ikea's Skadis peg system. Holds three bottles. 2x37mm + 1x33mm. For AK bottles/pots.

Ocena
5 / 5
Polubienia
3
Pobrania
18
Wydruki
1
Wyświetlenia
145
Oceny
1

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Organizers
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Strong bottle holder for Ikea's Skadis peg system.

Holds three bottles:

  • 2x of 37 mm diameter (like AK's 100 ml bottles).
  • 1x of 33 mm diameter (like AK's 60 ml bottles).

Uses six pegs for better strength.

How to print:

  • Print on the side with supports as shown in the pictures for strength.
  • Design is optimized for 0.4 mm nozzle but would work on 0.6 mm.
  • Use the 0.2 mm or 0.25 mm STRUCTURAL preset.
  • Tested with infill to 50%.
  • Recommended PETG, but PLA should still hold well.
  • Pre-supported Prusa Slicer project included, as well as gcode for MK4S and PETG. Supports are easy to remove.

Tagi