Counting matching models…
Rechen für den seitlichen Anschlag der Bosch GTS 635-216. Es können hierbei Werkstücke bis zu einer Höhe von 50 mm verarbeitet werden. Der Anschlag kann zusammen mit dem Featherboard und der Halterung im zusammengebauten Zustand unter der…
Print approx. €0.19–€0.24 excl. taxPreliminary estimate for one variant
Zero clearance insert for the Bosch GTS635-216. I had to print in two pieces and glue them, but I've included an "un-split" stl also. I added sections of 100% infill around the corners, the joint, and where the blade will cut through. I…
Print approx. €3.60–€4.40 excl. taxPreliminary estimate for PETGSource material: PET
Featherboard für die Bosch GTS 635-216 Tischkreissäge. Ein langes Featherboard mit Nutensteinen und Kreuzgriffschrauben für M6 Schrauben + Muttern. Featherboard for Bosch GTS 635-216 table saw. A long featherboard with sliding blocks and…
This is my take on a DIY suction hose adapter for the GTS 635 216 bench saw. My vacuum cleaner from Einhell has a hose with an outer diameter of 36mm and an end socket wall thickness of 2mm. This adapter takes both into account and…
Update: 10/30/2023 - I have now added a version which can use 608 (skateboard size) bearings. This version does not require supports. When testing fit, I used both regular skateboard bearings and this print-in-place version. This is a…
nozzle 0,4mm layer high 0,2mm 2 wall 15% infill without supports
This model is compatible with the lego system.
Eine kurze Schiene für die Bosch Tischkreissäge GTS 635-216 mit 3 Bohrungen für den Einschlag von M8 Muttern. Beim einschlagen der Muttern vorsichtig vorgehen, damit die Schiene nicht beschädigt wird. Die Schienen gleiten perfekt durch…
Passend zum osVAC System hier ein (ca. 75 Grad) Winkel mit M32 (Geräte-) Adapter auf F32 ("Base-Adapter"). Dieser Adapter findet an meiner Bosch GTS 635-216 Verwendung. Diese habe ich zum direkten Anschluss an das osVAC System umgerüstet…
The original clamping stone on the Bosch GTS 635-216 linear fence does not engage the V-groove of the aluminum profile. Properly engaging inside the v-groove increases stability and accuracy of the linear fence. This is a redesign of the…
Enclosure for XH-M609 DC12-36V Voltage Protection Module Solar Lithium Car Battery Undervoltage Low Power Disconnect Output Board. Includes buttons, cover, base box.
In meiner Werkstatt nutze ich eine Absauganlage, die ich mittels dem osVAC System an den Geräten anschließe. Grundsätzlich kann man eine Bosch GTS 635-216 auch mit einem Standard osVAC (F32) Maschinenadapter anschliessen. Da der Platz auf…
OsVac M32-Apdater für Bosch GTS 635-216 / OsVac M32-Apdater for Bosch GTS 635-216
T nut for circular saw BOSCH GTS 635-216. For M6 bolt
There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
Miter gauge for the Bosch GTS 635-216 bench saw. You need two M5 hex-head screws and nuts. DE: Gehrungsanschlag für die Bosch GTS 635-216 Tischkreissäge. Es werden zwei M5 Schrauben mit Sechskantkopf benötigt.
A camlock adapter for the Bosch GTS 635-216 saw. It might fit other Bosch models but I have not been able to test that. You can find the camlock adapter here .
2025/12/07 update: I've added a case with cutout for KCD11 button to cutout input power. This was created because in cutoff state it would still be drawing some current for the internal converter, relay and display which is not optimal…
I've been using this headphone clamp for a long time, it's awesome! I recently got a new G933 and realized how much the foam band had squished over time from resting on the original Monster headphone holder. I added an indentation so it…
I changed the diameter of the suction-side to 30mm by remixing the design of DrEmmettBrown. Many thanks for his work! Category: Parts
Holder on the table for hikvision indoor unit 6320, 6350 maybe others
Spenser for Hire - Hawk's BMW 635 - 1985-1988 3D printable model.
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
Hier die etwas längere Variante zum Original. Höhe hierbei ca. Das 67mm Modell ist an das osVAC Neo-System angepasst. Danke an Agar für das Original Modell!
Miele Cm6350 Gear Driver Miele Cm6350 Gear Switch Should be compatible with Melitta 6556235 / Delonghi The gears was broken cause O-ring are old, each 2 years must be replace to avoid to break this parts. You can use Melitta 200930 kit to…
Der Clip passt in die innere Nut der ausgezogenen Tischverbreiterung. Über die Sechskantaufnahme kann mittels Mutter und Schraube eine Platte z.B. für eine Oberfräse ausnivelliert werden. In den 2 Bohrungen können Einschmelzmuttern…
Die Einlegeplatte habe ich aus 3 mm Sperrholz gefertigt, 3 einzelne Lagen zusammen geleimt. Es müssen einige Ausschnitte in die beiden unteren Lagen geschnitten werden, sonst kann man die Säge nicht ganz hoch fahren. Die obere Lage ist…
Convertor from Glock 17 to Glock 19 Safariland 6354 (with Surefire X300). Made primary for airsoft holster copy from Wosport, but usage better with 9mm (the "pin" diameter is 7,7 mm - same as airsoft copy btw). Thanks to this piece, it…
Mount for OSB to attach a BOSCH GTS-635-216 with mount-shoes to a floor unit. Fusion 360 File with Parameters. Step-File included! You can use that design perfectly together with https://www.thingiverse.com/thing:5292332 - so you can use…
I decided to upload all of the files required to build the drivetrain I showcased in my previous video. PARTS LIST BELOW Specifications of my setup: -5000W Motor Power -43 kmh / 27 mph top speed -23 nm torque -30 km / 19 miles range…
The current version fits more or less on the thread of the probe, but I havend found the perfect matching thread yet. It tightens at the end so it does its job, but starts wobbling around when a little bit loose.
Pele : 1958 alifabolaget Pele #635 Meh - so'so Playing card to 3d Plaque experiment. Upscaled trading card pic in img2img Stable Diffusion tiled depth in tilezoedepth google colab use depth for displacment use upscaled pic for displacment
Eine Ersatzklemme für mein Featherboard von NEW für die Bosch GTS635-216.
A pretty simple case to hold the Geekworm X635 board. Fits perfectly with the C235 heatsink. Since things can get pretty warm there's no top, but the board sits nice and snug with peripherals plugged in. I'm using this with a PiKVM…
Logitech G635 have the ear cup held to the the head loop by this complicated pin that allows some rotation between the pieces. The pin broke and I tried to open it up and glue it but 24-hour epoxy wasn't enough to hold it, it broke again.…
INFILL: 25% SUPPORTS: YES (ORGANIC) SHOULD GLUE A RUBER GASKET OR PRINT ONE IN TPU
Scan of my DNT Hydra HS635. Please feel free to use it. My only (unenforceable) ask is that, for any models that you make, you make the files public for others to print. I also included a small model of the mounting interface, including…
Zur Verdrehsicherung sollten fünf (DIN 7 - Stahl blank) 3x12mm - Zylinderstifte oder ähnlisches eingesetzt werden. Material: PC CF Perimeter:10
A simple hose adapter which works by a simple friction fit with the saw and a and the the tip of an mobile dust collector with an 100mm hose
Cornerbracket for D-link surveillance camera DCS-8635LH and a "lid" for the lower part of the camera.
A simple Vacuum hose adapter which works by a simple friction fit with the saw and a standard european vacume hose with an outer diameter of 36mm
Bosch GTS 635-216 vacuum adapter. Reduces stock port to standard 40mm (DN40) HT-pipes or hoses
This is the bracket that connects the ground spike to a Hampton Bay NXT-SL-12 / Nextech SKU# 1005554635 Solar Light. Mine broke and I remade the part in OnShape so that I didn't have to throw out a working solar light because of broken…
This is a handy tool for adjusting the manual focus on the AW635 webcam. The camera focus is adjustable but it's very difficult to turn the focus using the 2 stubs on the front. This fits over the stubs and allows you to easily adjust it…
Extra cover for Lumia 630/635 Mario Mushroom Edition ;) Printed in PLA, if you use ABS or flexible filaments please share your prints! Enjoy :) Category: Mobile Phone
I didn’t find any suitable model so I designed this bottom part of the Sencor whisk, which is 1:1 to the original. For the top part use model from Tom90: https://www.printables.com/model/448075-sencor-whisk-metla Printed from PETG. For…
ORGANIZZATORE GT635 Realizzato: www.webtessitore.it IMPOSTAZIONE DI STAMPA Stampante 3D: Combo Anycubic Kobra S1 Laser: Mecpow X3Pro 10W
Extra cover for Lumia 630/635 Batman Edition ;) Printed in PLA, if you use ABS or flexible filaments please share your prints! Enjoy :) Print Settings Printer Brand: RepRap Printer: Hephestos2 Rafts: No Supports: Yes Resolution: 100…
My son's headset kept crapping out mid-game and micro-usb was the only cable I didn't have an extra of. Got a few months out of the cable. Printed in PLA+ and is a friction fit. Otherwise, you can order 4ft micro-usb cables X2 for less…
Extra cover for Lumia 630/635. Printed in PLA, if you use ABS or flexible filaments please share your prints! Enjoy :) Print Settings Printer Brand: RepRap Printer: Hephestos2 Rafts: No Supports: Yes Resolution: 100 micron Infill: 100%…
You have a 635 5x19x6mm bearing hole but only have 625 5x16x5mm bearings and don't wan't to design an adapter? Here it is!
Might fit your phone as is or with minor tweaking. Allows for vertical and horizontal pix. Category: Mobile Phone
Part of the Marantz 74 SD635 with 2 x cassette drawer. Also appears in Marantz 75 DC1010 and 75 DC1020 European part nr: 4822 403 70983 Part nr for USA/Japan/Far East: 446T002240 In the manual PDF: Part 117C, in the middle of page 17…
Print standing on end to help the part not split along layer lines. I was able to mount my AP-635-US to a ceiling joist in my basement without any problems. I printed mine in some cheap ABS with 15% infill and 4 walls, 4 bottom and top…
Replacement Feet for SIGG 6354 Fondue Rechaud. Print in PETG or ABS (heat) without support Ersatz-Füße für das SIGG 6354 Fondue-Rechaud. Am besten in PETG oder ABS drucken (wg. Hitze). Kein Support notwendig
Hi I modeled a plug for the rear brake disc on a Mitsubishi Pajero Pinin. Part number: MB407635 I recommend printing with TPU 95A filament
LEM HEME LH635 Replacement Knob. Designed for LCD Printing on the Anycubic Photon M3 Plus, but should work with any printer.
Wandhalter für Kettensäge von Dewalt DCMCST635
Case for storage and carry of 26350 battery
A model of a Russian military vehicle. Printed with a 0.4 nozzle and standard supports. Scale: 1:100. Loaded the 3MF file because Orca cannot perform Boolean operations correctly.
T-Nuts and Knobs for M6 Screws to Fix it on the BOSCH Table Saw - GTS 635-216 Professional
Eine kurze Schiene für die Bosch Tischkreissäge GTS 635-216 mit 3 Bohrungen für den Einschlag von M8 Muttern. Beim einschlagen der Muttern vorsichtig vorgehen, damit die Schiene nicht beschädigt wird. Die Schienen gleiten perfekt durch…
Replacement Feet for SIGG 6354 Fondue Rechaud. Print in PETG or ABS (heat) without support Ersatz-Füße für das SIGG 6354 Fondue-Rechaud. Am besten in PETG oder ABS drucken (wg. Hitze). Kein Support notwendig
You have a 635 5x19x6mm bearing hole but only have 625 5x16x5mm bearings and don't wan't to design an adapter? Here it is!
Hi I modeled a plug for the rear brake disc on a Mitsubishi Pajero Pinin. Part number: MB407635 I recommend printing with TPU 95A filament
There are some other adapters in my designs to be found as well. Printing time @ 80 mm/s < 3.5 h If you like this design, please post your print with a picture. Anybody willing to support with a small donation is more than welcome ;-)…
