Counting matching models…
Summary Are you tired of searching your clips for your airtight Samla box once opened? You like the simplicity of print-in-place parts? Then this Samla clip is for you. The only thing you need are some drops of glue to fix the clips.…
I needed this great design from Canislupus for a 22l samla box, so I recreate a clean fusion 360 file based on his v1 for sharing and allowing easy further modifications. Two models are proposed 11-22l samla box clip v1 Tested with 11l…
IKEA Samla Clip for 45/65l Box. Printed in PLA Updated the files it is now a bit thicker because my Clips creeped quite a bit. Print instructions Printed in PLA 100%Infill
My version of the Samla filmant storage is a minimalist design which is simple and quick-and-easy to print. Check out on YouTube how to build it, BOM with links in the description: UPDATE: 19/12/2021 I have added a 3D printable quick…
I wanted the lid clips for IKEA Samla Boxes in different sizes. The fit is similar to the originals. I have currently only versions for the 5/11/22L & 45/65L sizes of the samla boxes. Please make sure to print the appropriat size for your…
McLaren 765 LT Easy to print . Of course you can scale it the size you want. Easy to print for up to 100cm length, just cut it in some parts with the new slicer. I recomend a strength of about 2-3mm. Add some double-sided tape and stick…
For the Samla boxes from IKEA clips that have a different Fit dependend on how you would like it ;-) Best configuration to print is like shown in the 3mf file. I printed in PETG.
This model went thru several iterations to offer a perfect fit, a print without support, a fast printing time and a fit that allows easily installing the clips and stacking the boxes. You may also place the clip over the reinforcers…
IKEA samla clip lock for 45L/65L boxes. I didn't like the original design of the clip locks for samla boxes so I modified it slightly. Now it is flat on top and is easier to unlock.
Cover for a 1.65L pyrex storage dish. Print instructions Printed in TPU simpliFlex from Grilon3 with a Ender 3 S1 Pro. 0.2mm layer height, 10% infill and no supports.
Instructions For each samla box, print: 2x stand leg 2x stand leg mirrored 2x structures For a 4 spools air-tight box you will also need from other sources: Quantity Item Comment 20 Printed washers 6 M8 washers Can be replaced with 12x…
What is this? This is a basic bung I designed to seal the 40mm hole in the lid of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. Previously I was using masking tape, which was…
DESCRIPTION: I designed this desiccant box to store my spools for a long time without always having to refill my silica gel/desiccant. In total, the whole two boxes store about 4kg of desiccant and reliably keep the spools bone dry at 10%…
If you have the Rigid (Home Depot) 10" Miter saw with the laser line (model MS1065LZA) the insert plate (the orange plastic part) will eventually crack. I couldn't find it on the Rigid tools website but figured, it would work just fine as…
What is this? This is a basic bung I designed to seal the 25mm opening in the ball valve of the malt pipe of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. Previously I was using…
A print-in-place latch designed for IKEA SAMLA boxes (5/11/22L & 45/65L). It clips onto the reinforcement ribs along the box edge and improves on other models by also acting as a hinge. Works both as a latch and hinge Easier opening &…
Modified version to fit the 65L samla box. I simply cut one of the edge pieces and scaled the length accordingly.
Ein optimierter remix der Ikea Samla Deckel Clips. Ich habe ihn auf ca. die Hälfte gekürzt, aber so, das die Scharniere sinnvoll für maximale Stabilität geteilt sind. Gedruckt mit Amazon Basics PETG. Das Filament sollte kalibriert sein,…
An adaptor mount for my Garmin Nuvi 65LMT navigator. The adaptor has a printed thread for 1/4" foto thread. Prints as one piece. I use it to mount it to my RAM mount suction cup.
What is this? This is a basic cap I designed to seal the 13mm opening in the wort tap of the Brewzilla 35/65L Gen III all in one brewing device between brews, when it is in storage in my garage. The garage is dusty and there are insects…
Remixed to work with a 65 liter box. You need a tube with the right size (about 60cm) to hang your filament to.
The IKEA Samla clips are great for keeping the bin closed. I got tired of putting them down and dropping or losing them, so I've added a multi-link hinge with an end that can be adhered to the bin side. Print Settings Printer Brand: Prusa…
This allows the remote mounting of the Brewzilla Gen 3 - 3.1.1 control panel. It's designed to hook onto the existing Brewzilla handles and the feet then allow the angle to be adjusted. It includes the housing plus parts to mount it with…
Magnetic utility hook using magnets from Harbor Freight. Printed at 45 degree offset as shown to allow externally visible surfaces to be nice. You will need to drill out and remove the rivet holding the original small metal hook to the…
Lithophane A Mclaren 765lt mono lithophane picture, where you can put any type of leds/light source in and when the lights are on you will get a Beautifull car picture. Boost MeIf you Boost me, i will follow you to 100%! important The…
This is a four-corner bracket system designed to turn the side rails of common 3D printer enclosures; 60.0 cm x 48.0 cm × 72.0 cm FRAMES Fits generic Creality, CHOW Think-style basic enclosures. It secures the frame, and provides an…
Die box ist 100x 200mm und wird am Deckel der Samla-Box verschraubt. Das Trockenmittel kann nur in einem kleinen Netzbeutel eingelegt werden.
