Counting matching models…
Bohrschablone für Unterputzdosen und Hohlwanddosen Bohrschablone zum markieren von Bohrlöchern für 68mm Unterputzdosen und Hohlwanddosen (Steckdosen, Schalterdosen) mit Zentrierung in 68mm Bohrungen zum genauen Platzieren.. Die…
A simple template for marking switches and sockets. Thanks to the built-in holder for mini spirit levels, the switches always sit perfectly straight. There is an 8mm opening in the middle for pre-drilling or marking. The distance between…
Spool adapter, that fits about 75mm/71mm spools down to 55mm inside diameter. This is a solid model but you can print with 10% infill for great strength and reducing unnecessary fill. I printed with no top or bottom skin and adaptive fill…
I have designed this mounting shoe to be able to feet finder scope to my telescope. It matches the curvature of the telescope perfectly, as you can see in the pictures. Printed 4 perimeters to achieve stiffness, 25% gyroid infill on my…
Standard Neptune 3/4 threaded spool holder with a 71mm OD for larger spools
Simple drill template for 2 sockets, 71mm distance, cirkel at 82mm. (aftekenmal) I would like to see how other people made and use this for themselfs, a ‘make’ would be very nice. Thank you.
This is a remix that adds a taper to the base 71mm rollers
Remix of the drilling template for a smaller spirit level (10 x 10 x 29 mm).
Take your 71mm inner diameter spools to 55mm or 50mm with these adapters. All that is needed is (8) 6mmx2mm magnets to hold the cap on.
Tinkercad designed adapter ring to fit a Makita router (65mm) into the Openbuilds (71mm) router mount. Printed with PLA; .28mm layer height; 20% infill; 1 hour 10 minute print time on CR10S.
Printed in PLA+ on my new Ender V3 K3 with supports applied automatically. Extremely impressed with the speed and functionality of both this machine's hardware and Creality's cloud slicer.
Designed to stop your or your imaginary Girlfriends Hair to clog the sink
I created this ring to stack some "soup" cans in the cupboard (actually other canned foods) that don't slot or nest on top of another can, this ring helps keep them aligned and not wanting to slide around and fall down, because who needs…
The cable for the PSU is not very long and is bulky. I wanted a means to mount the PSU to INBXX instead of the Core One. This mod is for the US version, but the EU version can be made using the included 3mf project file if needed. I also…
Quick & dirty model for an under desk clamp to mount the power unit of an Ugreen NAS (dxp4800). Fits 4,5 mm Wood-Screws with counter-sunk head. 0,28mm (draft), 3Perimeter, 15% Infill. PLA is fine if you are gentle when tightening the…
Feel free to message me if you need something :D i was outside when a wasp was to close to our drinks so i made a cover that is wind resistant enough so it doesnt fly off printer settings are not the best yet so its not that clean
added a wifi antennae sma hole to original design
Remix of the drilling template for a smaller spirit level (10 x 10 x 29 mm).
