Counting matching models…
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Reupload of the 7300 side rails designed by IU1OPK . No changes made as per original license. Print them standing - if you print them horizontally, the side forces you are protecting your rig against can easily cause layer delamination.…
Nothing special, almost any filament will do. 0.2 layer height, double-sided tape to attach.
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Printed in PETG The frame STL is identical to the original, only the lid has modifications.
The frame designed by AndrewBrierley for the ICOM IC-7300 looked great, but I couldn't fit it in my printer, the part is 280mm long. In order to print the item I needed to cut it in half. You will need to print two of each part, the A…
This model is compatible with the lego system.
A simple mic hanger for my Icom-7300. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: .20 Infill: 20% Filament: hatchbox PLA Notes: I used tree supports with overhang over bed only.…
I was using a piece of a 2x4 for holding up my radio at the right height. I decided to make a 3D printed stand with different height's so others could adjust them to their view. I sometimes record the audio and the radio settings, so with…
EDIT 01/11/24: V2 version is here. Few changes compared to V1: reduced weight/dimensions by roughly 50% (V1 weighted at 72.7grs, V2 at 37.2grs with 15% infill) larger access holes (10mm) to more easily access the screws holes increased…
Same model, just added holes for insertion of 6x2 magnets. Printed in PETG with tree supports. Added a bit of epoxy on the top of the magnet to hold it in place, but probably not needed.
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
Connect your headset to your TRX. All connections fit into this small box. The box fits nicely on the side of the TRX. Holes are 6mm and 8mm offset. Holes for magnets are 10 to 1mm. If you have any questions you are welcome to write. Vy…
We picked up the Shun DM7300 kitchen shears as they were highly recommended by the folks of Cook's Illustrated/Americas' Test Kitchen. Since we are going to keep them in a drawer, it seemed like a good idea to have something to protect…
Created a parametric model that automatically adjusts the necessary features for a custom height riser that snaps onto the wire shelves in the Nova Kool RFU7300D fridge. The provided files raise the shelf by 1 inch. Change the “height” in…
Here is my version of Icom IC-7300 Keypad. 4 memo. Knobs used from aliexpress shop: https://a.aliexpress.com/_EHrIWoA Projet can be copy in thinkercad:…
This is a rack mount ear for 10 inch mini racks like the DeskPi RackMate.
Just a very basic sturdy VESA mount for the Startech ST7300U3M USB hub in 70mm and 100mm sizes. I recommend at least 5% infill and print with the countersinks for the screws facing upward. Uses standard M3 pan head screws for the hub…
In case your radio doesn't have any feet / stand like mine does, these offer a 10 degree tilt for your radio. Use an M4 x 16mm style bolt to attach to your radio. duplicate and mirror this model to print legs for the other side of the…
Stacking bracket for ICOM IC-7300/IC-9700 transceivers. Wanted to be able to use the tilt foot on the lower radio and a little more space between the units. This bracket (x4) provides the necessary stability and additional air gap. Note…
Created a parametric model that automatically adjusts the necessary features for a custom height riser that snaps onto the wire shelves in the Nova Kool RFU7300D fridge. The provided files raise the shelf by 1 inch. Change the “height” in…
This is a protective cover for the front of an Icom IC9700 or an Icom IC7300 Amateur Radio Transceiver. The front face plates of both of these Icom radios are identical and so for those of us lucky enought to own both, two print runs will…
Icom IC-7300, with decals. This model is not intended for printing, but rather to design accessories for the radio. I tried to upload the Fusion .f3d file, but received an error, despite it being an approved format.
This is an LED light bar for an IC-7300 ham radio. I used 5V RGB LED's and a Wemos D1 Mini running WLED to control them. The screws are 4mm. Wemos D1 Mini WLED
Here's a remix of a Rotary Station/Organizer for the Dremel 7300 rotary tool from designer Jordouellet from Thingaverse. Wanted the rotary station and tool organizer merged and printed onto a single plate, the other plate is for the…
