Counting matching models…
This is an adjustment jig for the DeWalt DWE 7492 and the DWE 7485 table saw. The set consists of multiple pieces for the adjustment of the fence and the blade relative to the miter slots of the table. Please pick the right extension…
Printed on Ender 3. Place model standing upright Help save your USB-C port on your laptop by printing and using a simple load saver.
osVAC Y-Adapter for the DeWalt DWE 7485 table saw, for the lower vacuum port. osVAC Y-Adapter für DeWalt DWE 7485 Tischkreissäge, für das untere Absaugrohr.
I wanted a zero clearance insert for my DeWalt DWE7485 jobsite saw and printed another I found online but it didn't fit my saw very well so I set out and whipped this one up. The insert fit well enough and was fairly straight forward to…
The miter slot on the True-FLEX featherboard didn't fit my dwe7485 so I took the exact dimensions of the crosscut miter that came with the saw and made a compatible miter slot for the board. Uses m6 screw and nut
This t-track uses a m6 bolt, I'll add more sizes if there are interest. The bar is slightly beveled to make insertion easier. (The featherboard can be found here: https://www.thingiverse.com/thing:4228110)
This model is compatible with the lego system.
The popular Dewalt dwe7485 tablesaw has a 2.5" dust port (2.3" ID) that was WAY too big for the 1.5" OD hose I had standard on my ShopVac. Hardware stores didn't have the correct reducing couplers so I designed my own. There is an…
This design is made for the DEWALT DWE 7485 TABLESAW This clip allows you to hold and remove the tablesaw when it's needed. No need to unscrew it, just grab it and move. To get a stronger print, I recommend you to print it with the " U "…
This model is compatible with the lego system.
An 90 degree adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Please note that the print time could be reduced by manually optimizing the print supports (in…
Connect your DWE7485 to your dust collection system
Designed around the 2.5" ultraflexible hose on Amazon and has an adapter to take advantage of the blade guard in order to collect dust from both under the blade and over the blade. Hose https://www.amazon.com/gp/product/B01M35BE8D/ Hose…
This adapter is curved so you can use inside a wood table and use a vacuum with 40mm hose. Curved prints are hard to print without support so I added also gcode with tree support as I have printed it. You can move printed part also when…
These are simple brackets that fit over the feet on the DeWalt DWE7485 / DCS7485. They allow you to easily & securely mount the saw in place as I found the original mounting holes to be very awkward as they are at an angle. Are a ver good…
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
I recently built a worktable with a space for my dewalt 7485 tablesaw in one end. As the table is on wheels, the saw sometimes get a little out of allignment when moving the table around. Also, the wood got slightly out of allignment…
This is based on the John Deere 7930 Loader and is not compatible with either piece of the Bruder part (42000 Front loader arm 1-B14), but it is a replacement. Both parts will need to be replaced. It is compatible with all other parts of…
Dyson V10 Motorized Brush Endcap Replacement Compatible with Part Number: 967483-01 This design includes two variations: Gasket-Required Version : A version designed to accommodate a gasket, matching the original specifications.…
Dewalt 7485 Table Saw Vacuum Adaptor for Ryobi Shop Vac
Miter track slider for Dewalt table saw DWE7485, designed for use with this featherboard https://www.printables.com/model/172907-featherboard-for-woodworking-no-supports-needed-wi , but can be used for anything. Designed for use with M6…
Use this prints if you placed your Table Saw in place and you don't want to move it again. I used screw for wood to place it. I used two peaces of them but one is enough. There are 2 files: Low is for lower tubolar of table saw. Here I…
I created this to allow for print on my smaller printer (Bambu P1S) and to then assemble with screws. Added a solid bar across the middle with 2.5mm holes for m3 screws to thread the pieces together or a narrower bar to use an m2 screw…
Needed to replace lost bricks and couldn't find a 3d printable part. I used a 0.25 nozzle with white pla
Update: Optimized Material use and added ripples for better grip. This is my first model I made myself. Please be kind :-) This oil cap / screw fits the oil tank of an Tefal Oleoclean Deep Fryer. Part no. SS-203748. Deutsche Beschreibung…
Simple DEwalt 7485 vacuum adapter to connect chip vacuum cleaners with 100mm tube diameter Semplice adattatore aspirazione DEwalt 7485 per connettere aspiratrucioli con diametro tubo 100mm
I recently got myself the Katsu bushing kit (model 105435) from Amazon, it was £20 when all the others (even the silverline) were quite a lot more expensive.Unfortunately, for some reason, this kit doesn't actually fit the Katsu trim…
I've seen a few fence spacers but none that would really work with the Dewalt DWE7485 A common issue I was having with clamping offcuts to the fence was the fact there's a push stick and not really too much room on the fence to clamp…
I found the original model on Thingiverse from maakit (November 28, 2011), but I found the design of the lettering not so nice, so I remixed it with a new lettering and added a step file, so you can adapt it easier. Print instructions:…
The original relay holder gets old and cracked with age. Fits in the factory location beside the battery near the clutch cover. Print in obvious orientation 92a TPU for best results Model has built in support for the conical plug, this is…
The chamfer makes the part compatible also with countersunk wood screw.
This model is compatible with the lego system.
Printed with 0.2 layer height 15% infill. Use it on top of the strings by the bridge. Do not stick it under the strings!
Dewalt DWE7485 to Festool 27mm hose adapter
This is a copy of the kawasaki ninja 300 swingarm cap 11065-0748-18T. Use sandpaper to give it a nice smooth finish and paint as you like. I used fs black from rsbikepaint. Prints in 2 and a half hours, 0.4 nozzle, 0.12 resolution, 50…
LEGO 4107488 track wheel to keep them taut, used and designed for robots made with LEGO Spike. Printed in PLA, requires supports to come out better.
Laptop stand to hold the Dell Latitude 7480 (~2018) laptop vertically with the screen open 180 degrees placing the screen at a more ergonomic height (using an external keyboard & mouse). Print fit-test Take 10 minutes to download and…
Als ich meine Tischkreissäge geliefert bekommen habe, war das Handrad zum Verstellen des Parallelanschlags kaputt. Kurzerhand habe ich es nachgebaut und gedruckt. Es funktioniert tadellos. Passt für: DWE7485 DWE7492 (in der Theorie sollte…
petite porte pour pipeline laitier pour valve quadrofix de la marque GEA
print as in photo, add supports for the bottom. i print in pla @.30 layer height.
Tensioner Bushing OEM SKU 11281748718, spare not sold any more. Beware of shrinking and/or warping while printing this. I had it printed in PLA with those exact dimension because I found out that my P1S was printing it 0,1mm smaller in…
More part numbers and CAD formats on www.traceparts.com/goto?Product=90-19012022-030019
BMW do not have a part number and do not seem to sell the clip without the seal. This is almost a 1:1 copy of the original clip which holds the sides of the rear roof seal to the side trims. Print on the side for layer strenght and flex.…
This is an adapter plate to allow a Craftsman 315.17480 router (or any model with the same 67.7 mm radius 120 degree (3) mounting holes) to a Hirsh router table. Theoretically, you could also just countersink 4 holes 127 mm apart in a…
This is a plastic replacement coupler that connects the motor to the head of the Craftsman hand grinder Model 315.17340. The coupler's part number from Craftsman is 1-607486-01 and they are no longer available, so I designed up the part…
Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…
Eine schlanke Halterung für die LG-Fernbedienung AKB74815321. Sie wird unter dem Schreibtisch, Regal oder TV-Board oder an der Wand montiert, sodass die Fernbedienung immer griffbereit ist. Die Fernbedienung wird eingeschoben und ragt…
The new Tahu Cosplayer minifig is great - but it's missing proper sword. Print him a new one! Use: 0.15 layer PLA works good SLOW SPEEDS - like 15mm/s Project is not exact original Tahu fire sword replica - it has been modified to be used…
Replacement slider inside vacuum valve. Mopar part #3748429, C-body cars 1974-78. Might work on 1969-73 (Mopar #2950115) also despite valve being different externally. I have multiple valves and all of them had pin sheared off due to old…
Tensioner Bushing OEM SKU 11281748718, spare not sold any more. Beware of shrinking and/or warping while printing this. I had it printed in PLA with those exact dimension because I found out that my P1S was printing it 0,1mm smaller in…
Settings for my hose and Dewalt 7485. No supports, print fine.
An adapter to connect a Dewalt DWE7485 Table Saw (65mmOD) to 2 1/2" (ID) Clear PVC Dust Collection Hose, created in Fusion 360. Both ends have a slight taper.
Steps the dust exhaust port down to a size a standard shop vac can attach to.
This model is compatible with the lego system.
