Counting matching models…
Das Modell ist speziell für das Notebook Dell 7750 konzipiert. Ich habe Euch eine Fusion 360 Datei der Füße für Eure Modifikationen mit eingestellt. Gedruckt hab ich das Modell in PETG. Das Modell ist ohne MMU gedruckt worden. Ihr müsst…
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
This is a small case for the light sensor BH1750 which can be plugged into the Flipper Zero's GPIO pins. The BH1750 can be wedged into the slot and then wired to a tree and a two pin Dupont Connector which fit into the cutouts on the…
Print as shown. Fits onto OEM intake snorkel. Insert spacer into base first, then foam filter, then attach lid. Without spacer the foam filter gets sucked into the intake.
Taller than OEM fuse cap, resettable fuses fit. Print face down, do not use supports on the tabs.
3D printed enclosure for HP DPS-750RB power supply with an X-Adapter X11 Prints in 7 pieces Functional power button for the X11 Requires 10 M3x20 to assemble, and optionally a further 2 screws to attach the two base pieces together.…
u need longer cables than stock, stock psu cable wont be long enough dont forget to scale model, printed mine in PC bottom panel with fan mount also available I do not consent to the sale of this model or any of its remixes in digital or…
This is a scan of a Honda VF750F RC15 instrument cluster. It mostly covers the top surface and the mounting "ears". The goal of the scan is to design a custom enclosure for a Naked Bike conversion.
My son really loves roombas and I haven't found any real toys out there so I decided to make them with him. There's a whole series on here that you can print. People have put these on birthday cakes, they've printed them to be massive or…
There are guides online about what pins to bridge to turn these PSUs on. https://www.ebay.com/sch/i.html?_nkw=HP+499250 https://www.ebay.com/sch/i.html?_nkw=HP+512327 https://www.ebay.com/sch/i.html?_nkw=HP+643933
Summary This project provides printable negative holders for Epson range of flatbed scanners with transparency support, namely: v700, v750, v800 and v850. The main objectives of this project are: to allow for easy and precise negative…
About My old Kawasaki H1 500 projects are in various states of disrepair and some parts are either too expensive or impossible to find. Figured this would be easy to model and be around for anyone who needs the same thing I do. It looks…
I lost my old Cover, so I deigned a new one. Print in TPU 0.15 mm Layer-Hight.
Created this barcode scanner holder for the C750 but also works for the C740 / C990. Prints without support on the side.
Africa Twin XRV 750 RD07 Fuel Tap Cap. Can be used for storing the fuel tank or to conveniently cover the opening while cleaning the tank of rust. Print Settings Printer Brand : Creality Printer : K1 Rafts : Doesn't Matter Supports : No…
Here is a ring that will slip over the Dillon XL650 & 750 powder measures to label whatever you want to make it easier to remember.
Montaż wymaga użycia śrubek fi3 dwóch różnych długości, wkładki wewnętrzne mogą wymagać delikatnego doszlifowania (zależy od dokładności druku). Dałem obydwie wkładki na baterie 750 (większe niż zalecane) osobno, żeby ładniej wyszło,…
I made a tray that can be attached to a P-touch P750W label printer with double sided tape (see picture). I uploaded different sizes 50mm, 80mm and 100mm long and a model with an opening on the left and on the right, per size. It should…
LG Remote Wall Mount (AKB75095308 & Similar) Tired of searching for your remote between the couch cushions? This minimalist wall-mounted holder is the perfect solution to ensure your remote always has a dedicated spot. Specifically…
A funnel for the 750 ml True Fruits bottle. Can be easily printed without supports. I printed it using PLA with 2 wall and 10% Infill.
Africa Twin XRV 750 RD07( possibly RD04) crankcase ventilation hose plug Print Settings Printer Brand : Creality Printer : K1 Rafts : Doesn't Matter Supports : As you see fit Filament : ABS/ASA Infill : 25% Category : Automotive For…
Just print, this is the exact same model as the original with a cutouts to fit HP DPS-750RB
This design allows you to wall mount your Lego Star Wars UCS Slave 1 vertically. After printing I had to file all the corners as my printer doesn't quite make them square. I probably over-engineered this as I'm paranoid about it jumping…
Model is correctly oriented for printing, but you need to mirror the 2nd piece along the x-axis. Printed mine in PLA
Ein Neuer Deckel für die True Fruit 750ml Flaschen mit Trinkhals. eine Handvoll vorteile bietet der neue Deckel. z.B er Rostet nicht, das Trinken ist einfacher und einfach zu drucken :) Das ist das Grundmodell. ein Stopfen und Neue…
If you want to get this template without subscribing, write me in chat! - SideSilhouette
Update 30.01.2026: Improved V2 released for better fit and less filament consumption. Summary This is the one-size-fits-all repeater stand for all the full-size wall plugged AVM Fritz!Repeater and FRITZ!Smart Gateway. All you need is a…
Ich habe einen Halter entworfen für die IKEA 750 ml Behälter. Ideal um diese als Pizzastation zu nutzen. Auf dem Foto ist die Version mit 45° Winkel es gibt noch eine etwas flachere mit 30° Winkel Link zu den behältern…
Mids lose their wonk, but bass still feels obscene. Mine uses nylon mesh on the opening, but you can use the infill grille with no bottom and top layer. Requires no supports. Let me know if there are issues, i'll try to fix it if i have…
This is a resin-printed tool to open the split barrel on the ETA/Valjoux 7750 family. It is based on a lathe-turned lucite part by Jeff Grieff. It uses a 2.5mm socket head cap screw to press against the barrel arbor because (1) I had one…
Stand for Hanshow Nebular 750Y electronic shelf label. The Electronic Shelf Label is used with openepaperlink no supports are needed Included is the f3d file.
Print in TPU! I included the single part so you can construct your own array for any number of batteries. The dimensions are modeled after the Explorer 750 holder provided with the Flywoo FlyLens 85.
Hello, this is my simple Rack Mount for Mikrotik RB750 Gr3 HEX. I designed this mount to use 1U space ( little bit less to allow some play) Mount is made very thick and sturdy to allow pluging and unpluging of cables without holding…
Really like this grater / slicer from Tefal but it always annoyed me how it would spill grated food next to the container. No more! This guard catches the food and gently guides it down to the bowl. Printed it with default settings, front…
Portrait stand for Hanshow Nebular 750Y electronic shelf label. The Electronic Shelf Label is used with openepaperlink I printed it with the leg pointing up, at an angle, with a 10 mm brim. No supports were needed. Included is the f3d file.
Dillon XL 650/750 Dual Toolhead holder. Original model by RC builder. I did not need all the accessory pockets since I still store those in the Dillon cases. I removed them and made it into a double stack holder to fit my cabinet. I…
The clips are really tight. You have to trim the plastic rail stop so the clips can fit. The rail stop doesn't seem to be necessary, as the window, at both maximum and minimum positions, is nowhere near the stop.
This tray has grips on each end to make it easy to remove from the Plano container to use it during games. It has a larger round on one corner to make it fit in the row nearest the hinge on both containers.
This item includes 3/4/5x stackable dial organizers as well as a 10x that fits in the large compartment of the Plano 3750. All dials are angled upwards slightly such that the name of the ship on the dial is just readable.
Use the included 3mf files to understand the recommended print settings for all files. Holds standard size cards. This only fits in the large section of the Plano 3750. No one ever ordered the CIS or First Order ones, but I can spend some…
Wallmount made in onshape that lets you display the Lego Tie Fighter UCS 75095 using the same method that the display stand uses. The wedge shape allows you to hide the screwholes for a clean mount. I included a recess on the front of the…
A cause d'un effort trop important, l'accouplement d'origine avait cassé. Recréé à partir de la pièce d'origine. Imprimé en Prusament PC-CF
Need to glue parts together. Print on Prusa Mk4s 0.15mm Speed profile without support
Printed with 0,1 high PLA Face down + Support for the grooves messschieber schieblehre schublehre schiebelehre
After a lot of use the strap on my 3m 7503 became very brittle and snapped. perhaps due to exposure to solvents and paints. I looked online for a 3d printed replacement to save a buck and found one, but it relied on glue to hold it in…
adapter for connecting dishwasher to birusa WD-750E2 disposer (standard Chinese model copied from bone crusher or inksinkerator), which has only a threaded hole instead of a spigot.
Just a simple case with a snap-in lid. I also added the blend-file if you want to modify it for your use case.
My original TOASK bag (15g) looks little bit tired so I made this clip (6g) to hold lid. As side effect I reduce the weight of my cooking set. It should be OK also for 650ml version.
A magnetic, tilted, minimal case for the Corne Choc Wireless keyboard. There is space for a 750mAh battery inside the case. There is also a slot for a power switch, placed under the microcontroller. I also added grooves on the front and…
Rebuilt from scratch, improved fusion 360 flow, optimized overhangs and material usage, added logo.
True Fruits Trichter für die 750ml Flasche gedruckt mit 15 Prozent infill und der 0,4 hf nozzle gedruckt. über likes makes und follower würde ich mich sehr freuen, Peace MazZe
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
I struggled finding a simple adapter for the exact combo of Makita LXT tools I have. None of the ones I found are fitting. I recommend this as a simple CAD excercise, since it is simple and basic shapes. But in case you cant be bothered,…
A small and simple holding bracket for the " TP-Link TL-WR902AC AC750 WLAN Nano Router ". Designed to be mounted with two 3,5x16mm screws.
A cover for the BMW F750GS Stock Exhaust. Cover your exhaust when you are washing your bike.
On my AL-KO lawnmower I lost the nut to secure the handle, so I made a copy of the original one. The M8 nut is inserted inside.
Staubsaugersanschluss passend für Black & Decker DN750 Elektrohobel Anschlussrohr 29mm Durchmesser.
The 3mf file is created in prusa slicer for a ratrig v4 300 machine with a PLA Profile and will generate a brim holding the outer edges.
This is intended to slide on the spike and provide better grip when installing the spike on the Chelegance MC-750. Please note, this is intentionally sized so it is very tight to avoid it sliding off in use. When you install it, push it…
Das Modell ist speziell für das Notebook Dell 7750 konzipiert. Ich habe Euch eine Fusion 360 Datei der Füße für Eure Modifikationen mit eingestellt. Gedruckt hab ich das Modell in PETG. Das Modell ist ohne MMU gedruckt worden. Ihr müsst…
Scale load cell mount and tray holder for 750g cell which has 7.5mm screw hole spacing.
Bumper case designed to be printed in a flexible filament. Will fit the NR-750, NR-850, NR-950 (pictured) and the NR-1050.
A holder to keep two edding 750 easy to access. The pens are angled by 15° to make retrieval easy and retain them well enough so they don't slide out accidentally.
This model is compatible with the lego system.
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Adaptateur ( entretoise ) pour placement nouveau support de plaque Honda Hornet 750 (2023) . La plupart des modèles “chinois” vendus pour ce modèle sont identiques , le montage avec les pièces fournies n'est pas bon , c'est pour cela que…
Bague ( entretoise ) de finition pour clignotants d'origine Honda ( Hornet 750 2023 ). La bague est pré fendue pour pouvoir l'écarter et la passer dans le creux laissé par le placement des clignotants d'origine sur un autre support. Sur…
wanted to keep my mechs from banging around so made this on tinkercad hope its usefull
These sleeves have a terrible habit of falling out and disappearing. GE does not supply replacements. The only option is to purchase a new knob for $60+. This sleeve will likely fit knobs for most GE stoves manufactured during the same…
Upgrade your reloading setup with our custom-designed and 3D printed Casefeed Adapter Storage Rack, compatible with the Dillon XL650 and XL750 reloading machines. This compact and efficient storage solution is perfect for keeping your…
Upgrade your reloading setup with our sleek and sturdy Station 1 and Case Feed Arm Bushing Holder, designed to fit seamlessly with your Dillon XL650 or XL750 reloading machine parts. This custom-designed and 3D printed wall-mountable…
A simple wall mount for a Deciso OPNsense DC750. Designed for wall mounting. Printed in ABS, but should also work well
A simple storage container for the popular BRS 3000 burner to be stored underneath a 100g gas canister inside of the Toaks 750ml pot. The compartments on the sides could be used for storing other small items. There is still room at the…
Designed this DIN rail mount when i converted my CR10-Max to using Voron skirts and feet. 0.2 Layer height Use brim or mouse ears
A nice lightweight sturdy holder to piggyback a TO Link AC750 on an Asair pro. Originally made for a fellow astro photographer on SGL forum and works a treat and gives perfect access and clearance for all cables. Also does not cover any…
Import from Thingiverse for Printables - https://www.thingiverse.com/thing:51675
I used Anycubic Kobra 2 with PETG but it doesn't need to be strong. It was made off original cover. Hope it helps someone!
The ADATA SC750 SSD is an easy way to add space to your Mac mini M4. And I made a bracket to hold the SC750 nicely.
This unique keychain is a miniature replica of the Volvo FH750 , designed with a sleek, compact look at 7 cm by 5 cm . Printed in 3D with a two-color layer change for added depth and visual appeal, it captures the distinctive silhouette…
While the astro-modified Nikon D7500 was mounted on the telescope and connected with a computer, the connection was interrupted from time to time because of wobbling connectors. As I couldn't find any cable holder for my Nikon DSLR I had…
An adapter to allow 3M spraypainting/dust/particulate filters to be used with NATO gas masks using the 40mm isometric thread. You can copy and edit the original file here:…
220V 750W AC Thermostatic Electric Heater PTC Fan Heater Incubator Industrial Heating Element Surface Insulation.…
This thermostat was used for control. Disassemble the receiver and use only the board. Used Brass Heat Set Insert 2mm for control board and 3mm for replacement bases.…
They clip on the LCD screen of your Nikon D750 so you can preview your image in a custom aspect ratio while taking photos. What? Why? How? Remember that when you play back photos on your camera, the image is slightly shifted upward on the…
Compatible with HP DPS-750RB A Server powersupply. It will probably work on most HP powersupplies that have built in fans. Useful for charging lipo batteries or anywhere you need up to 750 watts of 12v power! To assemble, short the first…
A Gridfinity holder for Ikea 365+ food containers in 750 ml size. Uses 4x4 standard size (42 mm) units, supports magnets. For minimal print time and material use, I recommend printing without bottom layers, 5 % infill on draft quality…
This is upgraded replacement feet for the Dell XPS 17 in and Precision 5750 to allow for more clearance for better cooling and can be printed on a single bed of the MK3/S/S+ and MK4/S/S+. Print Settings: Filament: Flex (I used Ziro 95A…
This is a 3D-printable replacement clip for the Entel CMP750. It works with the original pin and springs. Alternatively, the pin can be replaced with an M2 screw and nut. Orient the top and bottom parts on their sides and use supports.…
I started working with 3D for a litle time, I did not find any Mikrotik rb750gr3 for 10 inch rack, so I made my own.
