Counting matching models…
Two holders: for dual toothbrush (3 different versions) for quad heads The thing was inspired and partially remixed from following sources: https://www.thingiverse.com/thing:1916335 - for toothbrush holder v2…
1:200 Desk Model of the Boeing 727-200. The .3MF file contains all the parts for the print with seams and supports added. Use the STL to print individual parts. Requires glue for assembling.
Stanley FatMax FMST1-75779 Shallow Organizer Dividers for the large and small bins I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Included is the f3d file A lid exists, to prevent small washers to move to another bin.…
Remix to include the #757CARES logo
This model is compatible with the lego system.
This model is compatible with the lego system.
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Stanley FatMax FMST1-75779 Shallow Organizer Lid for the small bins This lid exists, to prevent small washers to move to another bin. I used a 0.2mm layer height with a 0.4mm nozzle and printed in PLA Print with the top of the lid on the…
The Boeing 757 is a mid-sized, narrow-body jet airliner designed and manufactured by Boeing Commercial Airplanes. First introduced in 1983, the 757 was built to serve medium- to long-range routes, accommodating between 200 to 295…
Boeing 757 with or without 757 markings on the tail. i print this with my Qidi Xmax 3 so large print bed. if you scale it down or up just keep the z scale at about 3mm .4 nozzle, .2 mm layer height 15%infill
For years my LG Magic remote was broken. It's discontinued so I can't get another like it. So I designed this battery cover in Fusion 360. It was a very hard project and took many hours of time, and a dozen test prints, but I learned a…
A small model of the Boeing 757-200 for 3D printing at small sizes (4-10cm works best).
This model is compatible with the lego system.
This bracket will accept a 3757 toothbrush charger for Oral-B toothbrushes and the like. It allows you to charge / store the toothbrush obliquely. It's got two-point contact and a large, flat base so is really quite stable too. The…
Adapter for e30 HVAC panel that allows the factory radios to be flush rather than protruding slightly
This is a charger cover and toothbrush head holder for the Oral-B charger type 3757. The cover is a very tight friction fit so it won't get in the way or cause the toothbrush to fall.
Bolts to a VESA mount (I used #10-24 bolts and nuts). Monitor's factory mounting post fits into slot. Can turn mounting plate upside down to elevate monitor a bit more (though you'll likely need to use a right-angle HDMI connector in that…
Bisley hanging file cabinet bracket for 5x Stanley FatMax FMST1-75779 Shallow Organizer I removed the metal hanging file brackets from the drawer. I printed this model 4 times, per drawer, in ABS and mounted using double sided tape…
T3 Anschlag für Türkontaktschalter der Schiebetüre.
A straightforward solution for Oral B 3757 toothbrushes, labeled with "his" and "hers" for easy identification. This stand serves the dual purpose of keeping your brushes neatly stored and preventing toothpaste stains on your sink. Two…
After over 25 years Condor operating the Boeing 757-300 ended on the 5th of november 2025. To honor and celebrate this, Ive modified my existing kit card so you can print the fuselage in Condors iconic stripes livery. Since my original…
I made these tweeter mount to find inside the factory screw hole and this was also designed with the " Infinity REF757T" in mind for my use case, hope you like it :)
replacement micro adjusment wheel for a MITUTOYO 0-25mm micrometer. Category: Parts
MadLabRemix - M757 Logi Mouse Case
I bought the KSA7575 On-Stage microphone mount without realizing it was too small to fit the tubing on the Liquid Stands Z style keyboard stand. Created this small adapter for a secure fit. I printed with 100% infill, but this was…
The original part for holding blades of my jigsaw broke so I modeled this part. Recommended configuration PETG. minimum of 3mm for the perimeters (8 walls with a 0.4 nozzle). 25% infill, cubic for rigidity. no supports , printed on a 45°…
Replace part of the ruder for Volantex 757-4 Category: R/C Vehicles
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
This model is compatible with the lego system.
A small model of the Boeing 757-200 for 3D printing at small sizes (4-10cm works best).
Print flat I used Polymaker PLA, Prusa Core One, 0.2mm layer height with a 0.4mm nozzle with adaptive layer height Dimensions captured using a digital calipre
IBM NetVista 09N5757 PCI Retention Bracket (Desktop) This is a recreated PCI retention bracket for IBM NetVista desktop systems (FRU 09N5757) . The bracket secures installed PCI expansion cards to the chassis, keeping them aligned with…
This model is compatible with the lego system.
Print flat I used Polymaker PLA, Prusa Core One, 0.2mm layer height with a 0.4mm nozzle with adaptive layer height Dimensions captured using a digital calipre
Based on protection allegée by @matt with inspiration drawn on by the Prusa RC2 mask. Designed to help Southeastern Virginia (USA) healthcare and first responders who are running low on masks and face shields. The design uses Write-On…
Change History: Dentists' offices needed the transparency much further away from the face to make room for lighted loupes. I added an extension that snaps onto the headband which moves the transparency 57mm further out, while still…
enlarged the battery compartment in the base to be 87mm long (approx.)
This model is compatible with the lego system.
