Counting matching models…
The NVR is shifted forward for about 60mm, suitable for shallow rack cabinets where there's not enough depth the height is also slightly higher than 1U because it holds the NVR from the bottom, not a problem if you leave a bit of space…
Title says it. I've had a few of these split on me, so decided to model one a bit heavier. Fits the diesel, kerosene, or gas cans. Print with spout opening up using supports, as the thread shape is odd with a flat on top.
Case for the SIM7600G-H-M2 4G when not being used as a Raspberry Pi HAT. Waveshare Wiki for the device: https://www.waveshare.com/wiki/SIM7600G-H-M2_4G_HAT Printing This was designed to be printed on a resin printer, with the flat side of…
**Changes have been made after printing test pieces This enclosure is designed specifically for the Raspberry Pi 3B+ paired with the Waveshare SIM7600G-H M.2 4G LTE HAT. It creates a compact and secure housing for portable LTE router,…
Z racji że nigdzie nie jestem w stanie kupić samej zaślepki napędu 5,25" do stacji Dell Precision T7910 to ją zrobiłem samemu. Mając drugą stację T7610 która taką zaślepkę posiada poświęciłem chwilę czasu i dzielę się z Wami moim dziełem,…
This is the case used in my Fosspot build video, a portable pocket hotspot device based on a Raspberry Pi Zero 2W and Waveshare SIM7600G-H (B) LTE Hat. This case is designed to accommodate a right angle Micro-B to USB-C adapter plugged…
Simple case for a LTE modem module. The both halves hold together by 5 M2 heat inserts in the bottom and 5 M2 screws.
I made this as a temporary mounting bracket for debugging and beta-testing an unusual pi-based project that involves using a SIM7600x module (providing 3G/4G data and GPS to my build). If anyone else has use for it, you're more than…
drive roller for microwave Toshiba ER-7600 (from year 1987) How I Designed This Just took mesures of the broken part Category: Replacement Parts
This 3D printable map legend and scale is for the USAofPlastic Topo Map Collection when printed at ~46.5% XY scale. This is a multipart model that can be either printed with a multicolor printer or each part printed separately and…
This is a remix of the camera mount for the Creative 73VF076000000 Live! Cam Connect webcam.
Replacement of the original logic board hooks/clips (part no. 815-0721) found in cases of Centris/Quadra 650, Power Macintosh 7100, 7200, 7500, 7600 and G3 Desktop computers. Print in the default orientation (on side) in the best quality…
Replacement of the original support column (part no. 922-1643), which tends to crumble after the years. Print in the default orientation (fins on top) and use supports.
You'll find french explanations on my website : https://labidulerie.vicou.be/guide-sac-nilfisk-gm200-300-400/ I had lost the original part and it is no longer available on the market. It is inserted obliquely and clips from below. It is…
Prints well with .15mm and snug supports. Its designed for 50mm M3 screws and nuts. This caddy was designed specifically to hold a USB Cable into place for these batteries, so the cable can not be easily removed, or dislodged.
This is a replacement for the red plastic actuator component inside Weber throttle bodies used on various Fiat and Lancia 2.0 16V engines from the 1990s-2000s. This part commonly breaks and is NOT available separately, requiring you to…
Simple case for a LTE modem module. The both halves hold together by 5 M2 heat inserts in the bottom and 5 M2 screws.
**Changes have been made after printing test pieces This enclosure is designed specifically for the Raspberry Pi 3B+ paired with the Waveshare SIM7600G-H M.2 4G LTE HAT. It creates a compact and secure housing for portable LTE router,…
This is a Holder for the Sony ICF-7600DS multi-band radio (Weltempfänger). I designed this, because the radio always falls over by touching a button. This is work in progress! Print Settings supports should be used resolution 0.2 Infill 25%
