Counting matching models…
⚫ Zetor 7711 ⚫ !!!Warning!!! Not suitable for small children. The model contains many small parts, risk of inhalation and suffocation. If you like my work, I will be very happy if you support me by giving me a follow and subscription on…
An aesthetically pleasant organiser that fits the (MG7715/65) Trimmer and all its accessories Designed to print super easy, just make sure the bottom is oriented to the print plate.
I printed it with PLA at 15% infill and .2 layer height on my Ender 5S1. I found the other DeWalt drill holder and it just didnt properly fit my drill and my drill sometimes slid off the wall, this fortunately keeps it secure and even…
Travel Case - Philips 7000 Trimmer Description A simple, strong and easy to assemble travel case for 7000 Philips trimer (I used MG7715/65 to model) that can be modified for your preferences of the attachments you use the most. This case…
Needed parts: M8 bolt M8 nut 1 cent (euro cent) coin. Printing advises: 100% infill on both parts, at least on part 2. 200 microns is enough, but it is better to print in 100-150. working even with PLA you can use lubricant on the rail…
This model is compatible with the lego system.
Replacement front logo for a 79-80 rx-7. I designed this to mount using M3 machine screws rather than pins. This not only makes the print much easier, but it also prevents the downsides of having flimsy 3d printed plastic pins to mount…
These two drills, the DeWalt DCD771 and DCF885 are commonly sold in a pair. I remixed a holder for the 887 to fit the 885, and created a holder for the 771 from scratch. I printed in PLA with 3 walls, .2mm layer height, 100% infill, with…
Box for 20 CPUs on sockets: LGA775 LGA771 LGA1150 LGA1151 LGA1155 LGA1156 mPGA946 mPGA988 and more 38x38mm CPUs
Depending on the orientation of the door you need to mirror it.
This model is compatible with the lego system.
This is a bushing to replace the rubber bushings on the shift linkage to some VW/AUDI vehicles. Cross reference part number for the rubber bushing is 357711798. PLEASE use the correct materials if you plan on using this in the real world…
A low profile bracket to suite the Dell Broadcom 57711 10gb network card. Part numbers KJYD8 / 0KJYD8 Print with tree supports.
This model is compatible with the lego system.
This model is compatible with the lego system.
Leider bricht mit der Zeit der Bügel des Transponders und man kann Ihn dann nur noch lose mitnehmen. Zum zusammebauen benötigt man noch 4 Schrauben M2 x 8 Unfortunately, the bracket of the transponder breaks over time and you can only…
Vodafone 2771 Cobra Cover Simple Cover when original pilot doesn't hold together. Print from some flexible filament like TPU
Printable spare part for the LEGO Excavator 64771. Just use the standard properties for your PLA / PETG filament. Support needed.
This is a wall mount for the DeWalt DCD771 20v cordless drill. It has two vertically spaced 4.5mm holes, so you can mount it to a stud using #9 x 2" deck screws, or similar. There are two versions of the back plate: The heat set insert…
Within the first two years of owning a 7771 series tacklebox made by Plano , the tab holding this door shut snapped off. I was recently in a Scheels store, looking at a 7771 tacklebox, and I could already see stress marks on a brand new…
I wanted a tig torch holder for my awesome Grizzly welding table. I used to use a magnet torch holder but it used to fall often and break cups so I made this. It's not pretty, but holds my torch perfectly. I added three magnet holes in…
This is a quick and dirty replacement for a part on my snow blower. The original crumbled long ago, so this is not an exact copy of the part in question (M137713) but it works great. I installed it in seconds with a pair of pliers.
Needed more straight dividers than what comes with the Plano 3771-00 box. I have tested this with Overture PLE and PLA. Print flat as it is with no supports. 10% infill at .20 resolution. Slide in with the tabs towards the top as the…
Me quedé con el frontal del cajón en la mano, he encontrado la referencia de la pieza en ebay pero me he animado a hacerla en tinkercad con buen resultado. El cajón está en su sitio con un coste ridículo. Por si a alguien le hace falta la…
This here is a mount to fit the AR-771 antenna with a standard SMA extender coax. I warn you this is a TIGHT FIT as I did not want the Antenna coming out when this is on the roof of my car. This coax extender seems to be working well on…
This is a 3D-printable replacement part for the LEGO DUPLO Excavator Arm (Part No. 64771) . It is specifically designed for the excavator found in Set 4986 (Diggers) , but it fits several other DUPLO construction vehicles. If your…
I got tired of my welding helmet falling off my welding table / cart so I modeled this up. It uses the existing 5/8" fixture holes to mount and holds a variety of helmets. Confirmed to fit Miller, Lincoln Electric, and Yeswelder helmet…
Adapter to use the Corsair H60i WaterCooler in a Socket 771/775 CPU
The holes fit for 3mm screws, to fit well shims can be added under the top cover. dobbelt sided tape can be a good idea to use under the cover and under part due to no screws are used for mounting the disk. This one is printet on my…
Spherical tip for Nagoya NA-771 dual band HT antenna The original antenna tip went missing, so I designed this one using OpenSCAD Used a bit of foam tac glue to secure it on the antenna. Printed in PETG in about 3.5 minutes on Flsun V400.…
I got tired of my O-rings migrating under the removable dividers and created these boxes to fit this Plano tackle/organizer box. I'm using these to organize o-rings and small parts in my paintball toolkit, but they could be used for just…
I wanted a handy way to store my tungsten when it accidentally gets dipped into the welding pool and thought a tray that mounts to my welding table would perfect. I've been running this design for a few weeks now and it works awesome!…
This is just a simple decorative object. Having played the Command and Conquer franchise a lot, I thought it would be fun to recreate the little chest you saw on the map. Printed in PLA+ Layer height: 0.16mm Number of walls: 2 Infill: 15%…
I have an Acer Aspire E5 771G 533T with a damaged bottom case keyboard and screen, this case is a work in progress nd also a proof of concept I will try to do my best to recreate every parts that I want to include in the case. I am trying…
90x68mm footprint. Just a super simple square benchtop organizer No spot for the gauge cause we all know where that goes (powerfist is the house brand of a tool store called Princess Auto in Canada. It's our version of harbour freight)
I had a container of TIG rods fall off my welding table while I was welding and managed to weld my tungsten to my stainless weld project out of shock- we can't have that.. So this idea was born; it's a two piece part with both part…
Convertible Roof Molding Fits 2007-2019 for BMW 320i,325i,330i,335i,M3,420i,428i,430i,435i,440i,M4 Replacement # 54377187747 These are the clips for my BMW convertible roof, replacement molding doesn't come with clips :/ So I designed…
Spare seal for Stant # G-771 (G771) locking gas cap. Mopar & others. 50 year old seals are cracked and seals of cheap new caps last only about a year. Made the seal 3D-print friendly. I printed in Filament PM TPE88 RubbeJet.
Repair part for Bruder's 771/01 tipping trailer linkage. Linkage itself has code 772/03/L.
Depending on the orientation of the door you need to mirror it.
Print one each of the .STLs included in the project in the given orientation. No supports.
