935 models
Model description The Boeing 787 is a wide-body, twin engine jet manufactured by Boeing. The 787 is Boeing's most modern and fuel efficient aircraft. It was the first aircraft to rely heavily on composite materials as they make up 50…
1:200 Desk Model of the Boeing 787-9. The .3MF file contains the parts for the print.
An indicator to the timemore sculptor 078(s), to help with setting the grind size.
3D model of a Viking sword adorned with intricate ornaments, showcasing a blend of historical and artistic detail
my son lost this part while building some cool original lego technic monstertruck (thanks to the LEGO company), and i was irritated not to find it somewhere here. luckily 2 were used in the model, so i started to reengineer it . the angel…
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
distance between pins is 37,2mm Printed in Prusament Galaxy Black PLA you need Supports use 4 Perimeters for strength Pegboard:…
Vorsicht: Spielende Zahlen ist eine Sammlung von Lernmaterial für Unterricht und Selbststudium. Nach und nach wir zu den meisten Drucken auch noch ein fOrscherblAtt beigefügt, das den individuellen Lernweg begleiten soll.
This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%
Mopar 1970-1978 engine compartment wiring harness retaining strap. May fit other years also. Original designer: Chrysler Co., Detroit MI. USA I disallow commercial use of this model. Version 2: 18.12.2025 Increased thickness and removed…
Easily add window screens to your louvered air vents to keep bugs out of your garden shed. Use PETG filament for outdoor use. No supports or brims. Print 2 frames. Apply outdoor rated 1" wide double stick tape to back side of frame. After…
Wallmount for E-Bike 378wh T.E.C Pack Battery of E-Bikes from Focus Jam2 / Jam2 HT / Bold2 / Sam2 with Shimano E8000 motor. Mountable with two screws to a wall or, using the holes on the backside with 2 screws (Phillips Rounded Head…
A simple custom fan shroud for XFX Merc Series graphics cards of the RX7000 series. Low profile, accepts any 120mm fan using M3 hardware. Uses M3 threaded inserts (d=~4,2mm, L<7mm). Includes optional flexible exhaust duct (soft TPU).…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** [UPDATE Aug 27, 2024] Added a version of the tensioner…
This model is compatible with the lego system.
This model is compatible with the lego system.
Collection of metric cap nuts including : M3, M4, M5, M6, M8, M10, M12, M14, M16, M18, M20, M22, M24. For general purposes PETG, PLA works ok. For some demanding application I would choose tougher material. If the fit is too tight, I…
This is a 3D model of the LEGO Star Wars Blaster #57899 in minifig scale. I'm currently working on a human sized version similar to this design which is split into multiple parts small enough so they can be fitted on most of the common…
This is a head-base that can be used to build a puppet-, plushie-, robot- or a fursuit-head (costume). I did add some ventilation holes, that can also be used to attach fur. The lower jaw is movable. The ears are NOT made for 3D printing.…
Designed based on the handle of a Dewalt DCF787. I cannot confirm whether this will fit other Dewalt tools. Features Positive retention on the bits so they do not fall out Produces a satisfying snap when bits are inserted into the holder…
Gundam head model overall height is around 13cm need 1 magnet (size 6x3mm) (optional add another 2 magnets on the side but it's not necessary) Every part can be printed with FDM or Resin
Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs , with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units . Additionally there are variants with a slot for easy gripping ("…
A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
All 78 Cards converted to .stl files. unchanged they measure 37x65x1mm with 5min/2gram for 1 card all together the stack should stand at 8cm high. Use your cards wherever you want since they are waterproof when made from plastic :) The…
Did a blender cleanup of the below model so an exported STL would work in a slicer. It's a larger model for rescaling or cutting/gluing depending on your preference. Was not able to get SketchUp to export the STL quite right despite…
This model is compatible with the lego system.
This model is compatible with the lego system.
Valorant protocol 781 knife. Scale to your need, share your makes and i like trains . ''GAIA'S VENGEANCE MELEE VALORANT'' was created under Riot Games' "Legal Jibber Jabber" policy using assets owned by Riot Games. Riot Games does not…
While these remotes or clones are cheap enough - I often break a perfectly good remote off at the keychain because they're so thin! This is a replacement case for a 2 button BFT R BCB 0678. It prints quickly and without supports in two…
Zero Clearance insert for DeWalt DWS 780 miter saw. I printed it in PLA+ with 80%+ infill. If you have smaller printer like me (Bambu X1C), insert can be cut in half with Plug connectors (4mm in diameter, 8mm deep). I recommend use 0.20…
The official Cisco part for wall-mounting 7800-series IP phones has been getting increasingly scarce and expensive as of late, so I set out to make a 3D-printed alternative for use at work. Additional Materials Needed: - 2x M3x6 machine…
This is a remix of my own sieve for the downpipe of the rain gutter: https://www.printables.com/de/model/578245-gutter-sieve-leave-catcher-d78mm-regenrinnensieb It fits a gutter with an inside width of about 120mm (130 or 140mm should…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Compared to the original model, it consists of only one part, which makes it much easier to fit the coil. This adapter adapts to the inner diameter ID (70-78mm) of various coils. I have tested it with GEEETECH, Jay-O, Giantarm and Sunlu…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
Here is another BMW badge, this is a slight redesign of the previous badge. This badge has a diameter of 78mm and is designed to replace the trunk badge of a BMW E91 , I am not sure if it will fit other models as well. As far as I know…
Well known czech railway vehicle
All credits to placebo_design for his beautiful and functional design (thingiverse.com/placebo_design/designs). This is a remix of “51mm Funnel for porta filter Delonghi EC680 series” by “Placebo_design” (thingiverse.com/thing:3471204).…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
My friend Jorge modeled this Gundam cockpit from a toy he found online. I reworked some of the geometry to better suit 3d printing, and he let me put it up here for the rest of y'all to enjoy. Try and position the parts as best you can, I…
LUCKY 13 has always reminded me of Gunpla and Mobile Suit Gundam, so I thought that I would make a version that looks like one. I've split the parts included with the original LUCKY 13 models, kh4j0's “Katana for Lucky 13,” BaGooN's…
⚠ WARNING: To properly print this model, you must enable tree supports . Be very careful when removing the supports, especially on small and delicate parts like the head antennas and hands, to avoid accidental breakage. Model Description…
This model is compatible with the lego system.
This case is designed around the following: Freenove FKN0078 7" Touchscreen Raspberry Pi 4 Model B Geekworm P165-B 11mm heatsink for the Raspberry Pi 4 Model B Assembly requires the following hardware 4x M2.5 x 15mm screws 4x M2.5 x 10mm…
https://makerworld.com/en/models/783309?from=search#profileId-720729 please check the original creator for license
Migrated from Thingiverse. Been trying to get some hands-on experience with several 3D modeling software and thought it would be best to start with working with some existing objects. Recently got into those Gunpla modeling kits and saw…
This model is compatible with the lego system.
This model is compatible with the lego system.
This is slim compact case for a ST7789 I2C 1.54" TFT Display Screen. The case was designed based on the measurements of this model I ordered from AliExpress. As with the other slim cases I've created the model's clearances are very tight…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
This model is compatible with the lego system.
Pumpklin with removable lid based on the design seen in the 1978 Halloween movie credits. I made this as part of a learning excerise using the Loft & Sweep tools in Fusion360. For use with battery operated lights only - I recommend a…
Backstory A friend of mine owns a Renault Twizy. The Renault Twizy is a small electric car with scissor doors. These scissor doors make contact with a door stop buffer (Renault Part-Number: 908782937R), which softens the movement when…
This model is compatible with the lego system.
A beautiful flower vase for decorative purposes to hold artificial flowers. It is 170mm tall and 111mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode with 0 top layers and 0%…
These knob design is from another transceiver of a famous brand. I like those very much, I decided to draw and adapt them for the AnyTone AT-D878U transceiver. It is kind of a difficult print, you have to have some experience. Also please…
Updated all files to show the dimension on the sidewall. To identify them better after you printed them! _______________________________ You want not only spool filament onto the original BambuLab Spools? You have different others and…
Chevy GMC GM transmission gear shift pointer indicator part No: "7840995" It may also fit other vehicles with the same style pointer The gear pointer broke when I was replacing the lightbulb for the indicator, a new one cost $60, so I…
This model is compatible with the lego system.
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This model is compatible with the lego system.
Cover to hold the pliers closed for storage. -Print in TPU standing on the opening. Category: Hand Tools
This model is compatible with the lego system.
This model is compatible with the lego system.
ENGLISH : Creating a camera support extension for Kobra 3 created by Chris-5-78 on makeronline : https://www.makeronline.com/en/model/Anycubic%20Kobra%203%20Camera%20Mount/85626.html FRANCAIS : Création d'une extension pour le support de…
This model is compatible with the lego system.
2x M4 screws HSW Dewalt Impact Drill
This model is compatible with the lego system.
This model is compatible with the lego system.
Model of a tactical knife Glock Model Field 78 Original. The supports should be easy to remove as they will run the entire length of the knife. The smaller the resolution, the nicer the model will come out. 50% filling is sufficient.
This model is compatible with the lego system.
Gridfinity holder for Knipex Super Knips 78 61 125. Printed in standard PLA. Text was added later using Bambu Studio. Fits like a glove…
This hood is SIMILAR to the EW-78E. Please note that I did a remix of a lens hood that I found online. I only resized the inner circle to match the diameter of the 15-85mm lens of canon. I still had to do a little bit of sanding here and…
This model is compatible with the lego system.
This holder/hanger is specifically made for the Knipex Cutters 78 61 125 & the Knipex Needle Nose Pliers 25 01 140. It is possible that other similar types of pliers could fit. See my other Wall Control designs:…
Created with the Fusion Gridfinity Generator .
This is a small protective cover designed for the Knipex side cutter 78 03 125 (without lead catcher). When applied, the cover locks the pliers in the closed position, ensuring safety and convenience during storage or transport. Printing…
The enclosure has a volume of approx. 3.15 liters. The port was tuned to 89 Hz with a slight dip in response above that according to WinISD. The dip can be corrected with an equalizer at 175 Hz +1.5 dB (Q=1.0). With these settings, the…
Organizer for 5 tools for Barista Pro. I have model BES878BSS and I don't know if it works for other models, but if you interested, we can try to work it out. You can put it on the warmer surface. I use it for next 5 tools: 53mm Coffee…
These are printed rails for the Anytone AT-778UV. I wanted something that would protect the front knobs and mic connection as well as the rear coax connection. There are rail spacers that can be printed as well to help keep it in…
Gridfinity Knipex 7881125 side cutter Seitenschneider 2x4 grids. See all my tools https://www.printables.com/@MatthiasHart_2387670
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
I made this thing so it plugs into a breadboard. Then I added a deep box for it. In the deep box I use the standard M-F jumper cables. It snaps together no glue required. Can be opened up if you want to reuse the part Print Settings…
![#0178 [UPDATED] Automatic Paracord Clothesline Tensioner (spring loaded, for 4mm cord)](https://media.printables.com/media/prints/962703/images/7574921_253a05d3-b794-48ef-9bfe-458d80461001_e08b1156-15dd-4fad-b664-246a109e7b5a/rl-20240819-012.jpg)
![[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm wide powder packs)](https://media.printables.com/media/prints/733382/images/5746562_2d6a740e-69c2-40d4-ad2b-e6003fc2bce4_2d2a5dd8-bd2b-40f4-8420-d6ab3b7815d8/0.jpg)
