Counting matching models…
Gridfinity compatible Kitchen Powder Pack Organizer with variants for standard 65mm or up to 78mm wide powder packs , with layouts for 2x2x1.2 and 2x3x1.2 gridfinity units . Additionally there are variants with a slot for easy gripping ("…
A simple cable management comb for ZWO ASI cameras with a 78mm diameter. Fits snugly over the camera and provides support for cables coming off the back. Printed in ASA (or ABS) for the best fit and UV/temperature resistance. The inner…
This is a remix of my own sieve for the downpipe of the rain gutter: https://www.printables.com/de/model/578245-gutter-sieve-leave-catcher-d78mm-regenrinnensieb It fits a gutter with an inside width of about 120mm (130 or 140mm should…
Compared to the original model, it consists of only one part, which makes it much easier to fit the coil. This adapter adapts to the inner diameter ID (70-78mm) of various coils. I have tested it with GEEETECH, Jay-O, Giantarm and Sunlu…
Here is another BMW badge, this is a slight redesign of the previous badge. This badge has a diameter of 78mm and is designed to replace the trunk badge of a BMW E91 , I am not sure if it will fit other models as well. As far as I know…
Updated all files to show the dimension on the sidewall. To identify them better after you printed them! _______________________________ You want not only spool filament onto the original BambuLab Spools? You have different others and…
Do not print in PLA, as it is not resistant to hot water and will deform. I printed mine in PET-G.
ZWO Cooled Camera Holder 78mm with Guide scope and Accessory Holders Fits many ZWO cooled cameras and others with an OD of 78mm like the ASI533MC and ASI294MC, then simply attach your DSLR lens to the front with the appropriate adapter. I…
Cable comb for 78mm astro camera
Please look at the newer version: https://www.printables.com/de/model/859040-gutter-sieve-leave-catcher-d78mm-version-3 This is a simple Gutter sieve / Leaf catcher for my gutter downpipe. It fits a gutter with an inside width of about…
Okay you Sublimation Printer makers, you asked for it, you got it. :D A standard office tape dispenser is too light to use one handed. So here are a couple of spindles to use with large, heavy dispensers like this one...…
Use supports. I painted a few support at the end of the funnel and it printed perfect. But if you use automatic supports use organic on build plate only (Cura) and tree support on build plate only (Creality) Your choice of resolution I…
Yeehaw, a knife sheath for your fancy knives. I went three years just wrapping my ole reliable santoku in a towel and some rubber bands. I think it's time for an upgrade. This project requires: [7x] m3x5x4 heatset inserts [voron spec]…
Cable management ring for ZWO ASI cameras. I built this for my 294MC pro. I secure it in place with a zip tie. Enjoy. Fusion 360 file included. Print Settings Supports: No Category: Physics & Astronomy
Case for a LED Matrix i use 4x WS2812B-64 8x8 LED Matrix from Aliexpress (1,69€ per part) https://www.aliexpress.com/item/1005007273659508.html (BETA VERSION)
Graflex Lensboard for aero ektar 178mm f/2.5 Need 4x M4x10 screw recommend to use 6.6CNC in gy2025.com for lensboard and 3d printing for screw mount largeformat film
The coins can easily drop in the slots. To release them there are two options. Also my garage opener (for Hörmann doors) can find a place. This part should fit in the coffe cup holes for many car types like VW, Audi, Seat,… If you need a…
I built a custom crawler using Capra axles, Holmes Hobbies/TGH Sherpa Chassis, and Vader Products Monkey Skid. The skid has a width of 78mm, so chassis components are a bit harder to find. When I decided to add a winch, I designed this…
Da es für meine Sockelleisten mit einer Höhe von 78 mm keine Verbinder gibt, habe ich diese selbst entworfen. Die Größe kann bei Bedarf im Slicer angepasst werden. As there are no connectors for my skirting boards with a high of 78 mm, I…
Tricky to print due need of some support. I was able to print with only a medium support in the middle
Cigarette Rolling Box – All in One A practical cigarette rolling box that combines storage space for tobacco, filters, and rolling papers (78 mm, e.g., OCB) with an integrated rolling mechanism . The rolling belt is printed from TPE…
Deckel für Speisequark Quark (stabileres Design) für Becher mit einer Breite 78mm
Printed in PLA black matte Layer 0.2mm Perimeter 3 Downlight Diameter 78mm Have fun printing and thanks in advance for your makes, likes, and feedback.
This is a model I made for my telescope to protect the interior from dust and debris during transport. It is a 78mm Moonlite Focuser End Cap for Esprit 120mm Telescope but you can resize it for whatever telescope you may have.
Print Settings Printer brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament material: PETG
This is a pair of ears to rack mount certain versions of D-Link DGS-1210-10P PoE switch. I have several of these switches. Some versions are wider than others. These fit the 278mm-wide version with eight RJ-45 jacks and a pair of SFP…
I saw many corner shelves but not the one I like or needed. Radius is 7in or 178mm. The holes I made are for #6 flat head screws (82 deg)
I am installing the MicroSwiss direct drive extruder on my Ender 5+ and Ender 3. I want to use the original Creality hotend though (I don't plan on printing hotter than 240). The PTFE guide that comes with the kit is intended only for the…
Bracket that holds a sticker using the US license plate hole pattern.
This is a 78mm measuring gauge for motorbike mirrors used in GERMANY. The law in Germany says that all motorbike mirrors may have a minimum surface of 69cm². This is easy to measure if it is a ROUND mirror because it means that your round…
Description Bumper for Injora LCG carbon chassis, just enough to protect the rails. No much overhead to not reduce your slope angle. I wanted to use the distance (mounting) tubes (78mm) in the front and the back, so I made the first hole…
Simple collimator lens mount designed for lens with a 78mm maximum diameter. Although I think when purchased online it was listed as 77mm. Category: Gadgets
Big holder for round bottles with a diameter of 78mm
Small holder for round bottles with a diameter of 38mm
Lid Cover for quark Quark (massiv design) for 78mm width
Desk Clamp Protein Shaker Holder A simple and practical 3D printable holder designed to attach your protein shaker to the edge of a desk. It keeps your drink within reach while saving space and reducing the risk of spills. The inner…
I modified the STP file to print in Bambulab P2S 0.4 nozzle. The tolerance in this printer is 0.1mm The original was too loose for PETG. CAD file modifled to print direct. I add the 3mf file. Printed in PETG
About Lens Cover for 78mm in diameter. Small three notches can grab up to 2mm of the edge on the lens (see last photo). Please like, create makes and add comments, thanks! Changelog 2025.10.05 - initial release Print provided gcode is…
As my LCG chassis is now used in my GOX crawler I needed a new bumper for the Injora LCG carbon chassis (78mm). It fits directly on the carbon rails and my Cherokee XJ hardbody sits exactly on top of the bumper. It is mounted only by…
Enhance your interior lighting with this classic, rounded 3D-printable lamp shade, generated using LuminaCAD. This compact model measures approximately 178mm in diameter and features a smooth, bulbous profile that provides excellent light…
Desk Clamp Protein Shaker Holder A simple and practical 3D printable holder designed to attach your protein shaker to the edge of a desk. It keeps your drink within reach while saving space and reducing the risk of spills. The inner…
just a spoiler with real foil spoiler V3 wingspan 78mm and wide 45mm mounting points
If using the .stl, you'll need to print 2 (One mirrored on the X-axis). Supports will be needed for the SKADIS hooks. If using the .3mf, both pieces are included, with tree supports already added.
Screw-on lid storage case for ZWO ASI178MM NON-COOLED camera. The case can fit the camera, the 1,25" nosepiece and one 1,25" filter attached. Files with "top+bottom" in the name for multi-material printing. A single extruder printer can…
Build with the largest surface facing the print bed. I used my favourite material, PolyMaker's CoPA, which has great strength and temp resistance and yet easy to print. Definitely better than PLA, PETG, or even ABS/ASA.
Self contained, printed without support, 78mm bearing (40mm ID) with 17 rollers held in place internally (see section analysis drawing). Once printed a few rollers may stick but once they turn the bearing rotates smoothly. Fun fidget toy,…
Uses M3 bolts and washers. the carpet 3d model has been included but is not a recommended print. I used paper and scotch tape. matching the diameter of the carpet model will provide a traditional cigarette diameter. if you make it bigger…
I designed this lid to be able to close jars of jam while keeping a small spoon inside of it. The jars I designed the lid for have a rim diameter of 77.5mm and the orignal lids have 6 protrusions for gripping the glass thread. I have not…
How To Print ? : Material : Any Layer Height : 0.2mm Infill : 20% Wall Loops : 4 Bottom Layers : 4 Top Layers : 4 Support : No Brim : No
![[gridfinity] Kitchen Packet/Baking Powder/Kitchen Powder Organizer (65mm up to 78mm wide powder packs)](https://media.printables.com/media/prints/733382/images/5746562_2d6a740e-69c2-40d4-ad2b-e6003fc2bce4_2d2a5dd8-bd2b-40f4-8420-d6ab3b7815d8/0.jpg)
