Counting matching models…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
I don't actually own one of these, so please let me know how it fits. My personal preference is to turn off top and bottom layers and use a 19% honeycomb infill, see screenshot.
This model is compatible with the lego system.
Blank cover for the VW Polo 6N1 or SEAT IBIZA, INCA, CORDOBA
A simple light phone case “rubber bumper” style. Thick enough to absorb the bumps. Minimal and light. Thin enough to charge wirelessly. Verified fit, works well. Version 3.3 and later add handgrip notches, and has a less pronounced lip on…
This is an insulating terminal adapter for a 151x65x93mm SLA battery. For my hobby applications I wanted to have a safe connection to avoid unintentional shortcuts and additionally have an integrated fuse directly at the battery terminal.…
A Waveshare Zero-DISP-7A display case that allows for the button control on top and access to the sdcard slot on the Raspberry Pi Zero(2) and access to the Power, eth, USB and audio out ports of the display. Mount points for speakers…
Volkswagen Polo 6N1 central console USB charger Insert · Background: I've recently installed a dashcam in my VW Polo, before this I had only the phone holder and I used a cable to charge my phone from one of these car cigarette lighter…
This model is compatible with the lego system.
This model is compatible with the lego system.
I needed a holster for my gun. The place I ordered from was taking a really long time, so I took matters into my own hands. This holster still has great retention and I drilled holes in it so I could use an UltiTuck clip. As always, treat…
About model My custom design of Hood insulation Pad Clip for VW Cars. This was made for Škoda Fabia II FL (2012). Size: 25x20x17mm Compatibility VW carmakers brands Modifications I optimised original VW design like so: Clamp has better…
This model is compatible with the lego system.
Designed by Charles C 2024 #002 Drumstick Holder to keep drumsticks neatly bundled together when carrying them around. Fits with 7A/5A sized sticks - insert down from the tip of the drumstick along the tapered shoulder until fit is snug.…
Design description This is a gridfinity holder for 9 27A batteries. Block area is 1x1, and has a height of ⅔, not stackable when filled. Gridfinity description Maker-favorite screwdriver storage blocks for the Gridfinity modular workshop…
a bracket to hold your 7Ah 12V DC battery in place and mount against a surface that is needed.
Tray inserts for a LiFePo4 battery pack for UPS 12V7A battery case. I am using a 30A BMS to go with the battery pack made out of Liitokala 32700 LiFePo4 cells. Mine measured at around 6300mAh when discharged from full to 2.7V (per cell).…
A fairly standard case for a Pixel 7A. I've included the STL file for the basic case, plus OpenSCAD source to allow customization for this phone or basically any other phone or tablet. This would typically be printed in TPU or other…
The CAF C7A2 replaced the C7A1 quite a long time ago. One thing they never really solved to my satisfaction was how the old c7 had different length butt-stocks to adjust length of pull for individual shooters. It also makes parade drill…
A simple easy to print voltmeter support for your dash no drilling no fuss just some assembly double sided adhesive tape hole is 30mm dimensions are: W x H x D (width, height, deepth) 50mm x 70mm x 50mm voltmeter:…
I had let my partner take my adjustable stand as they need it more than I do, however I needed something to throw my phone on. I made a cutout so you can use the swipe motion from the bottom of the phone. I do not use the charger…
a really low-effort lens cap for the 7 Artisans 18mm f6.3 pancake lens. I've printed mine with fuzzy skin on the outside
This model is compatible with the lego system.
Appareils employant cette pièce : Continental Edison CECUFS170 - CECUFS170 - CONTINENTAL EDISON CECUFS170 370047478 CONTINEN CEF1DW250 - CEF1DW250 CONTINEN - CONTINENTAL EDISON CEF1DW250 478668 CEF1DW250AP - CEF1DW250AP - CONTINENTAL…
This design is based on measurements from the MSA M13-A2 filters that were included with my mask. I've added an air channel leading from the external opening to where the air exits the filter pouches. The should prevent the rubber from…
Low poly Xi'an JH-7A Flying Leopard (NATO reporting name 'Flounder') in clean configuration and without landing gear. The scale is 1:144. Prints in a single piece with supports, but without an excessive amount of them. ** Print nose up at…
Quick design to hold a Dell K17A WD15 under my desk. Designed to be support free, pieces are correctly positioned in the in the 3mf file. Holes in the models are for 3.5mm countersunk wood screws
A battery pack for Russian and Polish PNV-series night vision goggles. Assembly requires no modifications to the goggles and no hardware*. The battery pack halves clamp around the connector in the NVG's power cable. This project contains…
Pedestal with attachment holes and washer designed for use with SS-X7A / APM-X5A speakers on compatible Sony Trinitron monitors. Printing Instructions: 1. Pedestal: - Print with a brim. - Use organic supports. 2. Angle Adjustment Screw…
Housing for the ZERO-DISP-7A touchscreen from Waveshare I tried to make it as compact as possible and to keep it as simple as possible. Total height is about 25mm Recesses for display control buttons on the side. There are 2 slotted holes…
FINAL PRODUCT: see pics battery flange 50325MY1000 for RD07 / RD07A print it in ASA / ABS or some Heat resistant filament use supports 30% (or more) infill
Jaguar Seat Belt Webbing Retainer GJA2447AA Updated version, A seatbelt retainer for Jaguar X100 (XKR & XK8), this model is for the right or left handside A pillar. Print in picture is done with eSun PLA+ bone white, which does match a…
The recent Radxa Cubie A7A boast an impressive A733 CPU using only 5V and some 15-20W power. I needed a nice desktop case for it to serve as a daily driver. Hope you like it.
Seamless geared follow focus ring for a 7artisans 25mm f/1.8 MFT lens. The focus ring was made to work with DJI Ronin SC pro combo follow focus motor. The fit is a bit too tight so the ring needs to be sanded down to fit on the lens.…
Utilizes Anker 313 wireless charging pad For Pixel 7a with NO CASE SUPPORTS NEEDED at very top. Organic supports recommended. Pocket at the bottom for easy alignment of the phone Charger at perfect height for maximum efficiency and…
I wanted to make a honeycomb storage wall for my camera gear so I designed this. I printed with PETG at 0.2 with 35% infill and 4 top layers. Check my other designs for my HSW camera wall!…
I like this phone cause of it's compact size. Everytime I buy a new phone, it's too large and I cannot get used to them so I keep reverting back to this one. So I made a case for it, which shouldn't expand it's size too much. Includes…
My daughter needed a case for her phone so I whipped out this simple case for a Pixel 7a. It has corner bumpers and fits quite well. It isn't the prettiest thing on earth, so feel free to remix some decoration onto the back or do with it…
A first attempt at 3d modeling cloud strife cosplay pieces. This is a first 3d modeling test.
The original handle to this mic is a rubbery material and disintergrated on my ~20 year old example. I designed this version to be a very secure push fit. You might need to scale slightly (100.5% or 101%) or run a round file through it to…
This is a kitcard-esque (no sprue) model of a T-7A. The T-7 is the newest US jet trainer, to replace the T-38. It is being made in a joint venture by Boeing and Saab. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No…
Just my design of a PSU Holer for the Prusa Mini. Mounted the PSU on my IKEA Lack Enclosure. Could be used as Holder for many more things. Print instructions I used black Geeetech PLA with the 0.25 DRAFT settings from PrusaSlicer on my…
Flügelmutter für die Rücklichter des Dodge Challengers 2015 Artikelnummer 6507357AA Gedruckt in PETG mit 4 Wänden
I bought this radio used and I really love it. But it didn't have the belt clip. What is one to do, besides 3D print one? I didn't try to make a copy of the original belt clip; I didn't think it would be strong 3D printed. This one has…
Druck in TPU / weich, 0.16 Layer Höhe. Beim Drucken das kleine Teil zuerst drucken, dann beim großen Teil bei Höhe 5,3 mm pausieren und das kleine einfügen. Dadurch kein Support nötig :-)
a simple 2-part printed case for Pixel 7a smart phone the top part is short, so you need to stick a double-sided tape between pixel 7a and the case. the bottom part is long, so it has enough grip between phone and the case. The case makes…
This build is tricky the same as the original one was. I only realized that as i sat down to make all things fit: at times the pockets for the M3 nuts are a wee tight and some carefully measured force is to be applied. Sometimes they turn…
Bottom is flat. Case is tested. Best printed slowly in TPU.
It was printed in PETG with 100% infill. After installation, it is important to balance the hinge so the doors do not slam at the end of the movement. Based on part number 20K7AX1 Hinge number 20k2e01.02
Replacement for a Mitsubishi Pajero Junior/Mini H56A/H57A Air Vent Knob. Mine broke so I decided to create these and print them in PETG.
I used a 12v 7ah AGM battery so I needed a 3d model of it in order to integrate it in my project. You can re-use it in order to save some time from modelling it yourself.
HBX 2997A ESC relocation plate. This sits on top of the three-arm servo retainer. This will provide you a more positive
Nice tray for my IKEA Livboj and my Google Pixel 7a to always get perfect alignment. Made in OpenSCAD fully parametric.
Replacement housing for the internals of the Edifier RC17A/RC80B remote. Uses original PCB, button membrane, battery tray, and IR cover. Snap fit, print without supports. 0.2mm layers with 3 perimeters and 100% infill. Decided to throw…
Adapter housing with power connections and LED lamp for a 12V/7A battery. The housing fits an NP7-12 battery, which is available in various sizes from different manufacturers. Great if you need a 12-volt power supply quickly. I attached…
I present my HBX 2997a TPU battery tray. You will need to relocate your ESC (usually what we all do first anyways). If you have moved it and want a more stable platform on top of your steering servo or have not moved it yet and want the…
I bought a replacement plate for my GE 731K microwave and it turned out that the protrusions under the plate were higher than in the original. So I had to improvise. The plate that I bought is DE74-00027A and was supposed to be a direct…
This is a cover to hold a cigarette lighter receptacle, a switch and a display for battery charge status from aliexpress.com if you have a 12V usb chager and an old UPS battery laying around you can use this to make a handy little…
У меня есть советский объектив ЮПИТЕР 37А. Сделал для него маску Бахтинова, которая позволяет навести фокус в бесконечность по точечному источнику света, например по яркой звезде. I have a Soviet JUPITER 37A lens. I made a Bakhtinov mask…
Short Description A mounting bracket for the Tobii Eye Tracker 5 designed for the ASUS XG27AQDMG monitor (and similar models). It positions the eye tracker perfectly centered on the monitor for a clean and flush fit. Features Designed for…
This uses Noctuas NA-FMA1 fan mount adapter to install a fan in the bottom position of my Lian Li PC-A77A that is originally intended for the PSU. It acts as a shroud and encloses the whole mesh. There is no real mounting, just a press…
Lower control arm 17A mod Added a radius at specific places to reduce possible fractures and added a sculpt to the arm for aesthetics Print Settings Printer: Artillery X1 Rafts: No Supports: No Resolution: 0.2 layer height Infill: 20…
UPDATE 2024-06-02 - corrected one of bolt socket position by 2mm. Print with concentric top/bottom, 3 top/bottom layers, 4 wall lines, 45% gyroid infill. Included 0.2mm thinner model if you need higher precision of infinity focus. NOTE:…
Replacement power and volume buttons designed for the TORRAS Magnetic Guardian Case for Google Pixel 7a . Print Details (Tested on Bambu Lab P1S) Printed using Bambu Lab's 0.08mm Extra Fine preset. Printed face-up without supports for…
I wanted my phone next to where I sleep. I don't have a night stand on my side of the bed, I have the side of a dresser so that is where this goes. Part is designed for a very specific use case: Pixel 7a Phone Spigen liquid air case Ikea…
Added 2.0mm to the base thickness of Adam's key base feature, the added four pockets that accept 1 to 4 6mm x 3mm magnets to keep the key more stable. I use a small steel plate strapped to my thigh and other magnetic base keys , but…
a simple 2-part printed case for Pixel 7a smart phone the top part is short, so you need to stick a double-sided tape between pixel 7a and the case. the bottom part is long, so it has enough grip between phone and the case. I added…
I made two versions: One with a Canonet-like handle and one with a Leica-like. Its a friction-fit to the lens. No glue needed. I made it for the Fuji-version of the lens, but it may fit the other versions as well. I printed it with 0.2 mm…
ASUS TUF Gaming VG27AQ1A, repro mount for genius soundbar 100
Der "sicherungspin" (Olivgrün) wird eiegentlich nicht benötigt, hält auch so ohne probleme. Verbaut sind die Clips neben dem Fabia (2000-2015) auch im Octavia (2009-2013) und Roomster (2006-2015)
Adapted @JTMcClain_3220074 CR2032 bin to also hold 9 volts, AAAA and 27A batteries as I just didnt need as much coin battery storage but a big thanks to JT for including the STEP file. My Onshape file Long URL…
12v Battery holder box 12v 7ah with COB LED Category: DIY
Fachzeichnen Arbeitsplanung Metall Grundstufe - Führungsschiene HuT017A
Volume knob for Montarbo - W17As pa speakers Category: Replacement Parts
Made this to clip two sticks together and to have space to add some personalized cut out (e.g. initials). It's made of two parts, the clip part prints upright, then you print the insert flat, potentially in a different color. In your…
This is mount for designed for Sony's PSX DVR DESR-5100 original HDD cage so you are able to install FC1307A with RepairBox firmware so you can trick PSX treating it like it's original HDD. What you need? FC1307A IDE to SD adapter flashed…
If you have a mobile raised bed from Costco (Cedarcraft model CC_SW2147A) with the bug screen option (CCGC-21-B) then these clips will hold the screen down against the side of the bed to keep birds and small animals out. I printed with…
Simple stand for ANKER A2567A PowerWave charge pad print with 2 perimeters, lightning infill 15-30% This will make object completely empty and light so you can pause mid print and fill it with stones and marbles and sand and... whatever…
This base is for the Microchip product Curiosity Nano Explorer EV58G97A that suits various development boards made by Microchip. I'm using it with an AVR64DU32, there are a lot of different kinds available. This base protects the bottom…
This 3D-printable mount is designed specifically for standard 12V 7Ah Pb (Lead-Acid) batteries. It provides a secure housing for an automotive blade fuse and organizes Faston (spade) terminal connectors, preventing accidental shorts and…
Traxxas Revo Conversion - Passengers Side Running Board (Floor Tray). Similar to Drivers side, this Floor Tray supports the Battery Box and if the drill gauge is printed the holes for the Samix EC5 mount can bolt onto this also. This side…
Fits the gap between my UV-5R and my SRH177A using a barrel adapter.
Ich habe noch einen weiteren Holster für ein Google Pixel 7a entworfen zu meiner vorherigen Version mit Magsafe. Die ich bereits früher auf meinem Profil erstellt habe.
Files: v3 is for bricks that are 7.5cm x 7.5 cm and older. It has only one lip, because I'm to lazy to backport the second lip to the old version. v4 is for bricks that are 6.5cm x 6.5 cm and newer. It has two lips. The fit is a bit…
for a class project, either a scraper or a bolt tightener.
My co-worker wanted a case so I helped him out. Figured I might as well share the model. use 3mm heated inserts and the original stand-offs to mount the PCB. Use the same inserts to screw the cover on. Use the same inserts to screw in the…
Držák ovladače klimatizace RG57A6/BGEF
3D Printed Monitor Stand (Modular and Interlocking Design) for ASUS ROG Strix XG27ACS Overview: This is a modular and interlocking monitor stand designed specifically for the ASUS ROG Strix XG27ACS monitor. It is intended to help organize…
Halo 3 ODST M7S SMG kit for the Tokyo Marui MP7A1 airsoft. Parts: Stock (Forward, Middle, Pad, Top Accent, Buckle x4), Laser Pointer + Laser Pointer Attachment, Suppressor (12mm CCW thread) + Suppressor Adapter. Hardware: M3 screws to…
If you are building a Corsi-Rosenthal filter or any kind of ambient air mover solution and you need to mount this specific Xpower X-47ATR fan to it, these clamps will do the trick. Intended for ¼-20 or M6 fasteners with washers.
This replaces one of the 3.5" drives on the Fujitsu FM77AV with a gotek. It's designed to fit one of the larger (small) oled screens, but the Fusion file is included if you want to modify it. I recommend printing at a relatively high…
Guess who bought a Fuji X-mount 7Artisans T.105 cine lens & thought you could buy a replacement ring to swap it to a sony mount... Anywho, I ended up making this which works fantastic! Printed in carbon fiber 100% infill. PETG variant…
Pin-plug for blocking elements in the old Rotary Switching Exchanges. Some Rotary 7A telephone exchanges remain in service, but only in museums and display cases.
The 7Artisans 7.5mm fisheye is meant for APS-C, but by unscrewing the front element it is possible to remove the built in lens hood. This makes it a fisheye distored lens for full frame. This lens cap is meant to protect the front element…
I have a 7Artisans 7.5mm fish eye lens for EF-M mount, recently got an Olympus EM1 and wanted to use the lens with it. Took some tries to get the fit right but it works well now. Hit the mating surfaces with a fine file to make mounting…
Add a traditional mounting lug to your SSM-17A for easy mounting in mobile applications. Replaces the metal clip assembly. Similar to other SSM series hand mics. Recommended Print Settings Filament : PETG Infill : 30% Perimeters : 3 Top…
I created this to have an easy way for a 'second line of defense' to secure the phone while paragliding.
I wanted to do a 3s conversion on my Haiboxing 2997a. You will have to relocate your ESC but it is easy on this buggy. I fit a 2600mAh Gens Ace 45c battery with a deans connector. This is the absolute maximum battery size for this buggy…
