Counting matching models…
Rámeček má vnitřní rozměry 28.6x73.8mm. Na adaptér se nasadí snadno a nehne se. Otvory na kabel jsou užší a ze začátku jde kabel do nich ztuha, ale časem se “ojedou” a kabel nevypadává. edit 23.7.2023: Nahrál jsem další dvě verze, kde…
Actually the model was made from scratch, but since it's heavily inspired by the model made by @seanbeaton_354300 , I decided to mark it as a remix. It was made to fit the A2518 67W power adapter shipped with M1 and M2 Macbooks. The inner…
can be printed together the model needs to be glued together or separately in other colours the A-10 is very realistic Print in place kit card , Assembly required need to use a support
I reduced the 96W version with 5.25mm. This might have been a tad much, so fits are tight. I've tried it with a .4 and .6 nozzle without issues.
For MacBook Pro 14 inches 2023, 96W USB‐C - MagSafe power adapter Added versions : 61w - 67w - 70w - 140w
Recently got a new MacBook Pro (2021) and noticed there was no good way to wrap the cord around the power brick. Naturally, I looked to see if there was anything already made for my charger (Model A2518). I couldn't find any that would…
Printed originally on Alfawise U30, that's why it's so ugly ;) I wanted to keep my Macbook charger under the desk so it won't be on the floor. At a same time I wanted it to be easily accessible - so I came up with this design. It's…
Angled Cable Recommended. Just slide the Power Bank in before you clip it on the Deck and you're ready to go! Print Settings: 0.4mm Nozzle 4 Perimeters 0.3mm Layer Height Material: PETG
A cable organizer for the 67W Apple power adapter based off of @Carbonbydefau_22485's design. Parameters in the fusion 360 file can be edited to fit different Apple power adapters. Use a strip of double sided tape to affix the organizer…
Print with no supports at 0.15mm or 0.20mm layer thickness.
The Fit (On a well calibrated printer) is similar to apple packaging, and will slide in and out easily, with the “air cushion effect” when dropping the charger in. Designed to still allow use (with an appropriately sized extension cord)…
Dieses Modell ist ein Remix von der Rugged Box mit passendem Inlay für den Anker Prime Charger. Ich habe zudem dieses Kabelorganisator genutzt. https://www.printables.com/de/model/564672-usb-cable-storage-organizers…
Insert pour le jeu de société 7 Wonders duel. Cela permet de ranger dans la boite de base, tout le contenu existant à ce jour, c'est à dire le jeu de base ainsi que les extensions panthéon et agora. Précision, par soucis d'ergonomie il…
This grill makes the Realistic Minimus 7W look better.
Ремкомплект для кабеля Type‑C (67 Вт) для POCO/XIAOMI Спасёт ваш зарядный кабель от излома и продлит его срок службы! Назначение Ремкомплект предназначен для оперативного ремонта повреждённых кабелей Type‑C, совместимых с устройствами…
Bought a new Xiaomi phone and needed a new holder for the new charger (the 67W chargers are slightly bigger than the old chargers). Printed in PETG.
The version for the 61W USB-C power adapter can be found here The power adapter of my new MacBook Pro was scratched very quickly after buying it, and i don't like scratched stuff... So i designed a cover for it, and my second power…
This Samsung Door Shelf is for the RL37WBSW model and can be mounted on all spots in the door. Motivation The original Samsung shelf part is designed weakly and I assume targeted obsolescence . Samsung also decided for a very complex…
Come support these models over on Patreon Buy my time, Not my models. M7W Priest weird war 1/100. Reasonably easy to print, fiddly to assemble, but you can pose each leg. I figured an artillery piece that could crab-dig itself a defilade…
Adds holes for a magnet and the two pass through bolts for the Jtech 7w Laser with the magnetic mount. Lets you easily clip the laser on and off with the magnets without removing the spindle. You will need 4 8x3mm magnets…
It's designed to be mounted under the desk, horizontally. There are two holes prepared for M3 flat head screws. Charger slides in/out easily - design is symmetrical so it doesn't matter how it's oriented. Fusion360 file is attached so it…
Box for 67W PD Charger and USB-A/C Cable
Basic settings, works good with 0.2 default setting
I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…
Replacement speaker grill posts for realistic minimus 7W speakers. These are a little wider to avoid rattles.
Mount the Sunyima 6V7W 185x270mm solar panel to a 35mm diameter pole with this model. Available in both orientations. Panel is angled to 15° degrees. Zip-tie or hose clamp needed. Consider printing with a brim because the models are very…
Replacement trigger for the Raptor PS4 controller (model INDEP007W). I've attached the .blend file for easy remixing. Included an image showing the best printing orientation.
-Printed on a Bambu Lab P1S with PLA Basic and standard .2 layer setting on .4 nozzle. -Auto oriented with support only needed on counter bored hole -Print 2 Slider Nuts -Hardware Required: 6mm x 4mm magnets (4 total) M5 .8 x 12mm Button…
I designed this bracket and cover to store my J-Tech 7W Pro laser when I'm not using it. I use the laser with a OneFinity CNC. The bracket requires the laser to be stored upside down, so I also made a cover to keep dust out of it. I've…
This bumper is designed to print in a flexible material, the retention fit requires a few millimetres of elastic stretch. supports are required but print beautifully with organic supports in the new PrusaSlicer 2.6.0 alpha release.
Cable clip for Baseus 87w 2in1 Adapter & Power Bank
Printing guide: Files names are structured as following: <Name of the part> - <Number of the part in the Assembly Guide > List of parts you need to print more than once (winglets): Back Winglet - 5 Front Winglet - 6 Assembly guide:
A dual hose mod (add an intake hose) for a Inventum AC907W air conditioner. Might fit other air-conditioners with same design. This replaces the rear air intake of the A/C with a custom panel to allow a separate intake hose. Uses the same…
Exactly what it is. Prevents dust from landing on your paper, while not in use. Pretty sure can fit other similar pantum models. Print without supports.
Replacement upgrade for Trigger guard.
Pin Bracket for a Hosim X07 RC Car
I improved the original design by adding a drainage hole on the bottom of the cover so water can drain out if the exercise bike is exposed to the weather. In my pictures, I spray painted the pedals to protect the exposed metal of the…
The adapter was made to replace broken fans with new 120mm fans. This adapter also optimizes air flow, removes the gap between the fan and the case and allows you to install slower fans, which reduces the noise level by tens of times!…
Hallo, es handelt sich hierbei um eine Montiormount um einen Dell Optiplex 7060, oder einen mit gleiche Maßen, an einem Acer b247 Monitor anzubringen. Dazu werden einfach die Gummihalter auf der Rückseite entfernt und die Mount dort…
This is a 3D-printed holder for the CIO SMARTCOBY Pro 67W (20000mAh) power bank. It comes with a belt clip on the back, allowing you to attach it to your waist belt or bag strap for hands-free carrying. Features Designed specifically for…
## DIN Rail Mount for Gledopto ESP32 WLED Digital LED Controller A compact, screwless holder to mount the Gledopto GL-C-017WL-D (ESP32 WLED Digital LED Controller, 4 outputs) directly on a TS35 DIN rail in your distribution box or control…
I've included the STEP file in case you want to modify it for your microwave. I printed in PLA with relatively high infill (50% or so). I expect it won't last as long as the original, but it'll be a lot less than $150 when I need a new…
Replacement trigger for the Raptor PS4 controller (model INDEP007W). I've attached the .blend file for easy remixing. Included an image showing the best printing orientation.
DIN Mount for WLED controller. You'll need: - 4x 3mm Inserts - 2x m.3 6 mm screws
Veeery simple stand to angle the solar panel to 30° Print at least two ;) Might also work for other panels with 2.0-2.3mm thickness
I remixed timpmandan's Macbook pro usb c charging brick keeper as apparently the bricks are all different sizes depending on the wattage. This is for the 87w power supply for the 15" MBP 2017 model. I also put a zip tie around the plug…
DIN Mount for WLED controller. You'll need: - 4x 3mm Inserts - 2x m.3 6 mm screws
THIS IS THE BEST LOOKING ALL-in Organizer for 7 Wonders 2nd ed. board game THAT YOU CAN PRINT! 📢 Stay updated! Follow me on social media @ammedia3d for the latest news and new product releases ! 🚀 🎺 FEATURES 🎺 This is a 3D printable…
The second thing I've ever made. Custom-made to hang the charger with cables on the IKEA Lillåsen desk. *update: a more solid V2 Printing instructions Print on its side with supports. Layer height: 0.3 mm Infill: 20% or more
Gridfinity storage for your MBP charging brick! The double is 2x2 and the single is 2x1. This was designed to fit the 87W Mac USB-C power adapter/charging brick (specifically model A1719). I know this brick came with the 2018 MacBook Pro…
The holder can be printed from any material. No supports are necessary when the model is placed on the build plate with the foot facing down. A layer height of approx. 0.15mm is recommended.
I remixed timpmandan's Macbook pro usb c charging brick keeper as apparently the bricks are all different sizes depending on the wattage. This is for the 87w power supply for the 15" MBP 2017 model. I also put a zip tie around the plug…
![[Without AirTag] MacBook (Pro) - 67w (74mm x 28.5mm) power adapter cable spool](https://media.printables.com/media/prints/1a98f3f8-ebb7-424d-a0d1-ceffe5394130/images/10136203_7c457afe-4bce-4f1f-a606-e2a34d4d18bb_25c13927-7063-4029-9f77-d9cd57cfbad3/2025-07-01_12h22_36.png)
![7 Wonders (2nd ed.) ALL-IN organizer (Base + Leaders + Cities + Armada + Edifice) by @ammedia3d [tabletop board game inserts sku: 7WNDR001]](https://media.printables.com/media/prints/4580fe6d-f891-40dd-9169-5f0e630a341d/images/12952732_05e3dd14-5a63-43e8-b2b3-4a82564644a8_d994c897-01fd-423f-bbdb-c1b2b38bf40d/1.jpg)
