Inventum AC907W Dual Hose Mod
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dual hose mod (add an intake hose) for a Inventum AC907W air conditioner
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 132
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A dual hose mod (add an intake hose) for a Inventum AC907W air conditioner.
Might fit other air-conditioners with same design.
This replaces the rear air intake of the A/C with a custom panel to allow a separate intake hose.
Uses the same 150mm flex hose the exhaust hose (spares can be bought easily).
Probably needs to be split in 2 halves if you have a printer with a bed volume of less than 300mm
Can easily be glued together as the clips will take the forces applied.
Can be printed in PLA as it will not endure high temperatures unlike the exhaust port.