571 models
Update Oct. 14, 2022 : Missing files for 60 tooth gear added. These lathe change gears should fit most 7x10, 7x12, or 7x14 mini-lathes. These prints include all of the standard gears, plus some additional gears to make additional thread…
Print approx. €3.38–€4.13 excl. taxPreliminary estimate for one variant
juggling around with nvme 2280 sticks, i needed one box for storage. here a first attempt for 7 cards. 4 clips hold it closed, easily openable, fits cards without squeezing them. since i have only cards without heat spreaders, i designed…
Print approx. €2.31–€2.82 excl. taxPreliminary estimate for one variant
Avenged Sevenfold A7X logo 3D
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Profile "U" for LED Light Bar Prusa i3 MK2 / MK3 lighting. Fitted perfectly, it enters with a slight resistance. To avoid the bending of the profile from the LED heat, I recommend printing the element with 70% filling. The LED strip must…
Print approx. €2.39–€2.92 excl. taxPreliminary estimate for PETGSource material: PET
“Years ago" Inspired by all kind of clever solutions at the time, I designed a dispenser for 330ml cans which printed in only 4 pieces on my BIG 3D printer (~450mm x 450mm x450mm) which rests in piece ;-( Luckily the local brewery decided…
Print approx. €4.07–€4.97 excl. taxPreliminary estimate for PETGSource material: PET
This is a Remix of the 5.56mm Battlebox (shared by EvolvingExtrusions via Thingiverse) which has been resized and relabeled to hold 50 rounds of FN 5.7x28mm most commonly used in the FN Five-Seven and P90. I resized using PrusaSlicer and…
Print approx. €8.95–€10.94 excl. taxPreliminary estimate for one variant
The source marked this model as adult content.
Print approx. €6.90–€8.43 excl. taxPreliminary estimate for one variant
This lathe change gears should fit most 9x10, 9x12, or 9x14 mini-lathes. This change gear makes it possible to cut metric threads on a lathe with an “imperial” (typically 16tpi) lead-screw. For details on using this gear, see this link:…
Print approx. €1.63–€1.99 excl. taxPreliminary estimate for one variant
Simply photo frame / stand 5x7 13x18 127x178 Easy to print, can be used on landscape or prtrait orientation Printed with 0.6 nozzle, 0.4 layer and PLA
Print approx. €1.04–€1.27 excl. taxPreliminary estimate for one variant
This lathe spindle spider fits small lathes with a rear spindle thread of M27x1.5. This includes many 7x10/12/14 inch lathe models. Assembly There are 8 holes that need to be tapped M6x1.0 (the equivalent length ¼"X20 screws should work…
Print approx. €2.29–€2.80 excl. taxPreliminary estimate for PETGSource material: PET
Buckle for flat elastic band 7mm x 1mm originally created for secure the band to 3d printed protective gear Print instructions Just standard Prusa 0.3(draft) profile
Print approx. €1.58–€1.93 excl. taxPreliminary estimate for one variant
Added more bays so the MK3/MK4 build size is fully utilizited by this model
Print approx. €10.46–€12.79 excl. taxPreliminary estimate for PETGSource material: PET
Just remixed the MMU-Model to fit my 17x7mm Aluminum U-Channel I used this U-Channel: https://www.amazon.de/dp/B07549D36V (German Amazon) Print Settings: 0.20mm QUALITY Layer Height: 0.20mm Infill: 15% Gyroid Supports: Build plate only…
Print approx. €2.83–€3.46 excl. taxPreliminary estimate for one variant
This is not something you will want to use for precision work, but these are quite useful if you keep their limitations in mind. These devices are used in a 3-jaw lathe chuck to hold flat work-pieces at an even distance from the chuck…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
Damit der Pfosten etwas länger hält, habe ich ihm eine Abdeckung spendiert. To make the post last a little longer, I gave it a cover.
Print approx. €1.98–€2.42 excl. taxPreliminary estimate for PETGSource material: PET
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Imitation of 5.7x28 cartridges for P90. The cartridges are made exactly according to the machine documentation, so they are fully authentic. I have 2 variants,…
Print approx. €0.50–€0.61 excl. taxPreliminary estimate for one variant
The Garmin Oregon 6xx and 7xx have a great touch surface, but it also reacts very easily to accidental touch. For example, if you wear the device on your belt, and it touches your pants with the screen. Only if you lock the screen, this…
Print approx. €2.49–€3.05 excl. taxPreliminary estimate for PETGSource material: PET
Kresleno v PTC
Print approx. €2.68–€3.27 excl. taxPreliminary estimate for one variant
PG48 threaded blind stuffing to close unused PG48-openings in housings. Adapter for (1-7)xPG7 cable glands for smaller diameter wires. Unused PG7-openings can be closed with PG7 blind stuffings with PG7-thread. [1] Thread types: PG thread…
Print approx. €1.18–€1.45 excl. taxPreliminary estimate for PETGSource material: PET
I needed more places to put hard drives in my home server. I found the mounts by sk_2002 and xcooling, but after printing the 4 bay version, I realized that my case had a 140mm fan mount on the bottom. some redesigning in sketchup, and…
Self inking stamp (47x18) (same ink pad as trodat 4912). here is video www.instagram.com/p/CMf8UjKhHci/ what you need: ink pad (47x18 - for 4912 stamps) laser engraved rubber (or you can try printer stamp design with TPU) some spring for…
Made this for my drink mixer project to weigh the content added to a glass. I have the autocad file if anyone needs any changes to the scale or bottom. And if you liked my project please consider just tipping me for the fun of it. Print…
Features A variety of button caps for square 7x7 / 8x8 / 8.5x8.5mm PCB push button switches Works with any switch with a 2x3mm square mount, either friction-fit or glued in place Choose from various shapes & sizes, or make your own with…
a 7x4x3 variant of David's Multiboard open bin system for objects wider than 15cm
97x71 version of the original project
Gwr 57xx 5700 class model rail model train british rail steam locomotive tank engine
Воронка для маслозаливной горловины автомобиля Тойота, двигателя 4GR-fse, резьба М37х3мм Funnel for oil filler neck of Toyota car, 4GR-fse engine, thread M37x3mm
Dummy cartridge, possibly useful as a snap-cap or failure training dummy, or possibly not. Cartridge is used in the FN Five7 and PS90, among others. Dimensions and drawing are from the image by Thomas Flinch on Wikipedia, which is…
M7 x 20 Bolt or screw normal thread tip or follow if u like <3 G-workz3d <3
Layer Height: 0,2mm Infill: 20% Material: PLA
NOW AVAILABLE NEW VERSION FOR OneBlade QP45xx/46xx NOVĚ K DISPOZICI VERZE PRO OneBlade QP45xx/46xx EN: PHILIPS OneBlade stand The model was designed with an emphasis on simple and fast printing while ensuring sufficient weight and…
Matrice LED compatible WLED fabriquée dans le cadre d'une vidéo YouTube
Ender 3 encoder nut M7x0.75 Best result with 0.08 layer height
Simple holder for my 7 small Wiha screwdrivers. Fusion360 link: https://a360.co/2wRh7KL Category: Tool Holders & Boxes
Festool MFT DIY Corner Stops (20mm) Verschiedene Varianten: Corner Stop 121mm x 121mm Corner Stop 217mm x 121mm Corner Stop 130mm x 130mm (einstellbar) mit verschiebbaren “Dogs” Straight Stop 121mm Straight Stop 217mm
The 6x spice rack can be printed normally, but the 7x should remove the poopline once the poopline has been printed so it will be printed in the model (printed with P1S). Both are 43mm in diameter.
Design Concept The desk cable organizer set is designed for optimal functionality and a minimalistic aesthetic. It's available in configurations of single, triple, and seven slot arrangements to suit various cable organization needs.…
Inspired from the Pinecil 4x Tip Holde r I have change the model to fit 7x tips. I do recommend putting the larger tips to the sides. Note: when they are all attached it is a bit hard to pick one up, it is very tight in there.
Passend für Bestway Steel-Frame-Pools mit einem ovalen Stangenmaß von 47x32. Druckbar in PETG mit Support. Schichthöhe von 0.20mm ausreichend 3-4 Perimeterschichten Ferner benötigt man noch: 5x M8 Schrauben in geeigneter Länge 4x M8…
Separate tile to maximise the bed usage of a prusa mini+. 7 hexagons on the X axis and 8 on the Y axis. Set the skirt distance to 1mm
Halterung für: Zangen und Stifte Passend zu: S37x9 und Skadis Lochwände 8 Versionen: 2- und 3fach jeweils als => open - close - getrennt Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 -…
This is a remix of Devrosx's self inking stamp. I fixed up the model, and added some design so we can use screw to secure the shell - stamp holder rotation. This makes the stamp rotation smoother and a lot more reliable. ====== Non…
Advanced first layer calibration test.
I would appreciate a lot if you could support me giving a like and downloading, thank you guys.
This Grid is fitting an ALEX drawer completely.
Highly recommend use PLA. 😉
Protect your Dynavap M7XL (or any M model with the XL condenser). Fits anything around 109mm long. Always appreciate feedback and reviews! Would be great to see a picture of a build! Hope you enjoy
Slide box 7x5x2 cm Print settings 0,2mm layer 4 walls 15% infill no supports
Soporte para base de carga reloj Fenix 6X-7X
Dummy Kugelschreiber-Feder 28x4,7x0,5 Dummy zum Konstruieren Print instructions Dummy zum Konstruieren, ist nicht zum drucken gedacht verschiedene Formate anbei.
S37x9 - Grundplatte B67 für Lochwände mit 37x9 Raster ( 9x9/37er Raster ) - Grundplatte für geringe Traglast - Als Basis für alle S37x9 - B73-B221 Modelle => S37x9 Family - Passgenau für pulverbeschichtete Lochwände - Prusa Print-Mode:…
This is replacement parts of headband (plastic portion only) for AKG K7XX variants, and that transparent plastic attached to inner slider. The models themselves are flat, you need to print them with PETG or other flexible/ductile…
i was working and a customer brought in his road bike to bleed his brake's. we had the ATB (m5) version but not the road (m7) so i found one online. it works great if you already have the ATB kit from Shimano I used a brim, printed in…
This part is designed to replace the RIGHT ear cup fork mount on JBL Tune 7XX series headphones - made for and tested on JBL Tune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well…
Habe eine Spardose gesucht für Münzen von 2 Cent bis 2 Euro doch keine gefunden die mir wirklich zusagt. Deswegen hab ich mir selbst eine Spardose designt und stelle diese hier zur Verfügung. Maße: Außen: 107mm x 107mm x 107mm. Innen:…
Eine Abdeckung/Abdeckkappe für Zaunpfosten 67x67mm (Innenmaß)
This part is designed to replace the RIGHT swivel joint on JBL Tune 7XX series headphones - made for and tested on JBLTune 770NC but it will fit several other models with similar cup forks. It can be used for the left side as well by…
robot soccer 17x16x9 dos puntos de contacto
Gridfinity organizer. Two sections can hold AA batteries. One section can hold AAA batteries. Each section can hold about 50 batteries. The curve on one side helps with getting the batteries out of organizer.
This is a fix for the elastic bands in AKG K701, K702, K712, and AKG K7XX headphones. It's been tested on the K712 Pro and should work for similar models. You'll need an elastic hair tie and glue for installation. If you want to you can…
Vector Optics Frenzy-S 1x17x24 płytka do pistoletu Walther PDP
If You have 17x17 cm pellet trap and want to use 14x14cm Air Rifle or Air Pistol targets - print this (preferably in PETG). It's very slim, so it won't ricochet.
Added a beacon and wanted a very quick 1 layer test of the bedmesh. Takes me 6 minutes to print and only 4 g of filament. All squares are connected so easy to pickup off build plate to discard. 430x430mm at 0.3mm layer height, for 500mm…
Capsule filler remixed for 21 capsules, and added top part for press and take out capsules.
A squares grid pattern to use with bed leveling with 7x7 points. This grid should fit 220x220 beds with enough space left on bed in blind spots: areas where 3D Touch sensor cannot reach due to probe offset. Initially, this model was…
Ein Schutzgehäuse für die Canon G7X MkIII , welches ich hauptsächlich für den Transport nutze. Ähnliche Kameramodelle sollten auch passen. Wer die Trageschlaufe auf der linken Seite hat, muss das Modell spiegeln. Ich druckte die Box in…
SAFETY WARNING : Before using this manual crank on your lathe, first unplug the lathe to prevent accidental starting with the crank handle inserted. This print is actually the parts required for a handle and “spindle nut” and requires…
This is a replacement for Traxxas Maxx wheel washer that goes under the wheel nut. It is part number TRA8957X. I printed it with PAHT-CF, which is a carbon fiber reinforced nylon. So far, it has held up well. After it is printed, I had to…
After trying some previous models that did not allow full movement of the extruder when near the top and evaluating others that replace OEM parts with newly designed ones decided to make my own from scratch trying to overcome all the…
simple tray for 9 rockwool cubes , 4x4 cm (1.57x1.57 inch) with a trivet. There is space under the cubes to see if roots have formed and to protect the roots from the water. I recommend a wide brim because the corners will easily detach…
A gridfinity bin 7x2 for printing on the mk3s i split it in two parts in the slicer
Halterung für Schlitz - Schraubenzieher von PB ~ ab Jg. 1953 Mit 3 Griff-Typen kompatibel: Classic, Multicraft und SwissGrip Passend zu: S37x9 und Skadis Lochwände Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix…
7x8 Gridfinity compatible baseplate for Zack Freedman's Gridfinity storage system, split into 4 puzzle pieces for printing on a smaller printer. This is designed in such a way so that the base plates cannot be separated if moved front to…
Larger baseplate for more area coverage in one print.
IO plate for GIGABYTE GA-Z77X-D3H (rev 1.1) - I think it would work on other revisions as well. Fusion 360 project: https://a360.co/2HJfZyb Printed flat side down with no supports, material and quality don't matter because the print is so…
This is a PaperSafe box for printing in darkroom. It is resistant to bright light and gives quick access to photo paper without having to constantly open and close the paper package. The size is adjusted for printing on a Bamboo Lab P1S…
English (Deutsche Beschreibung siehe unten) I offer the hex-bit-storage in several variations : This version offers room for 7 x 3 bits only Other variants are: 8 x 3 bits only 8 x 3 bits plus Wera Rapidaptor 8 x 3 Parfguide All variants…
Halterung zu Gewindebohrer - Sortiment - M3 - M12 Passend zu: S37x9 und Skadis Lochwände 2 Versionen: Hoch und Flach Montage Varianten / Anwendung: 1. Lochwand 37x9 => 1-3x Garant “Easyfix Grundplatte 2" - B67 - Grundplatte - 2 2. Skadis…
This is a clip in bracket to replace the worn out elastic for an AKG K7xx (701/702/712/others) series headphone. Requires no disassembly, modification, cutting, gluing, etc. It is designed for a hair elastic (ponytail elastic) of about…
I make hole bigger to connect chain together, main body doesn't need support (end 1 still need support)
I made a "homemade" HDD tray for the Fractal Design 7XL. You can print it at home, as you don't have to buy it from the store. Note : This model is currently being tested as a prototype . PLUS , the Tray B.step is only for Seagate…
I made a plate for holding 2x of my Pavotubes T8-7X (diameter 28.5mm) at once. On the photos I used some polycarbonate clamps that I had lying around but I also made a clamp from PETG that works as well. In the middle of the plate I used…
auf den Kopf drucken ohne unterstützung. print upside down without support. Petg 0,2 Layerh
Simple mask to use for prints. Better with higher infill to make it a bit heavy. Print five "doors" to use it as test strip maker, glue handle on top. How I Designed This…
its a case for a perfboard so your cables wont stick out of the board.You will need to make holes or glue it to the pcb. i used it for my esp 8266 deauther project by spacehuhn,I attached the cover (or case) to the pcb by drilling the…
2fach Halterungen für Inbus-Schlüssel Sets von PB SwissTools ( Sechskant-Winkelstiftschlüssel oder Winkelschraubenzieher ) 2 Versionen: B73 - 2x Inbus-Schlüssel Sets - 1.5-10mm - 2x Inbus-Schlüssel Sets - 1.5-10mm + 1x 0.71 - 2mm (…
Cantoneira inferior 97x97mm, utilizada para criar estufa para impressora 3D.
Follow the same instructions from https://www.printables.com/es/@BC76, work pretty well. Thanks. I used 0.20 layer height @ 50% infil with PLA+ 4 walls 4 top and bottom layers With supports (below)
Here is my take on a XL 7 panel version of the PrismLume project by How To Homemade I had a large space on a wall to fill, so i made it bigger! A few things to note: You need to use a ESP32. ESP8266 does not have enough memory. As the…
A simple and elegant puzzle for a little brain-teasing. The part orientations are ready to print. The cube has 3 layers, so you can print them in different colors, or use the same color for extra difficulty. Hard difficulty. Printing…
The square key is often used for doors, which hide water or heating pipes behind them.
This is my first real attempt at creating a model. Few attempts and changes leading to this v3 version that is a friction fit for the filter. 10mm standoffs keep the filter and fans separated to allow the airflow to spread out to use the…
This this a replacement for Fluke part # 646679. It's the detent spring that gives the dial its click and locks it into each mode. This part was broken in my Fluke 77 Series II so I designed a replacement. It's not an exact copy of the…
Medtronics insulinpump clip keeps breaking. Printable replacement part with similar design to original. Uses the originals rod and spring mechanism.
