51 models
Box für Muniton, sehr stabil, für 20 x 17mm x 54mm Dimension ca 90mm x 100mm, Höhe 60mm
Print approx. €6.39–€7.81 excl. taxPreliminary estimate for PETGSource material: PET
Simple mask to use for prints. Better with higher infill to make it a bit heavy. Print five "doors" to use it as test strip maker, glue handle on top. How I Designed This…
Imported from my designs on Thingiverse. Original upload was 03.05.2020 (dd.mm.yyyy) Brackets compatible for Lego. With the standard H shape and several sizes. The brackets in the cover photo are the largest and the smallest and the paper…
Powersupply Case [117x55x195]
Print two of each: Eyepiece cap is the smaller protector for the eye-side of the binoculars Objective cap is for the larger/final lens in the optical train I have added a small 4mm hole for attaching tethers so that THIS time I do not…
Bonsai pot 26 rectangular (mame) 137x97x58mm, support is necessary.
Basic 7 x 5 inch Picture Frame to replace one that broke. 138mm wide, 191mm long, 12mm thick Have to cut out the included supports - very easy Can resize to whatever size needed
A half sized remix 2x1x3 for 7x5cm Protoboard
All* the HSW inserts sit on and are stabilized by the front surface of the wall, so all that matters is that the wall has that thinner ridge on the back for the clips to set into, this remix just allows you to insert inserts from either…
20-100% infill PETG Lid attach with clue. Part of E-textile project: Learning Platform for E-textiles
Sized to fit ~8 cards. The photo is with 7 (all I carry). Internal dimensions: 87 mm tall 56 mm wide 10 mm deep Side snap case lid. The seal is cleaning filament, the pins are welding rod (2.2 mm) but filament may work. I have the source…
Solidny i funkcjonalny wspornik narożny został zaprojektowany z myślą o stabilnym mocowaniu elementów w różnych zastosowaniach – od mebli po projekty DIY i konstrukcje techniczne. Dzięki przemyślanej geometrii zapewnia wysoką wytrzymałość…
Tray for reloading ammo case, for 81x 9mm and 100x 7x57R
Munitionsbox für 7mm Mauser, 7x57. Es passen 20 Patronen in die Box. Der Deckel wird aufgeschoben und rastet am Ende ein. Es kann alles ohne Support gedruckt werden. Gedruckt in PLA Matt. 0,4 Düse, 0,2 mm
Držák za opasek nebo řemen. 2x 16Ga. broková, 2x 7x57R kulová.
I have a card cutter that trims to 86x54mm, and I often use it to make board game cards or other small custom cards. The sleeves I use are 87x56mm, and they fit perfectly snug into this card box—it’s incredibly satisfying! Today, I…
A 7x57 Mauser version of my reloading tray.
I made an insert for a 7x57 or 7x57R. I based my measurement on CIP chamber data plus a tolerance of 0.2mm on the diameters. I would appreciate it if someone would be able to verify a good fitting.
7X57mm Mauser stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
7x57r caseing and bullet can be turned on/off in .stp
7X57mm Mauser Vase Mode stacking loading block. This is a work in progress, so check for updates before printing. Category: Tool Holders & Boxes
The NanoGrip Micro is a tiny, permanent adhesive hook designed to securely hold cable ties in cramped environments. With compact dimensions of 7mm (L) x 5mm (W) x 5.5mm (H) , it fits seamlessly behind devices or inside electronics. Simply…
I make a lot cases of the original model with the snap-in window . To make the windows I use A4 sized acrylic glass sheets and the largest possible size with A4 sheets is 7x5. So I created the model and printed a couple. The case is 6…
Box mit den Maßen 138x37x52. Fusion 360 Datei zum bearbeiten angehängt.
Replica of original Rubik's cube stand ( 57x57mm) - Replika originálního stojanu Rubikovy kostky
I made this to hold a remote for the Silverstone LSB02-E I got as a review sample. I made it so you can mount it with standard drywall/wood screws, 10mm diameter round 3mm thick magnets, or just double side tape it. I imagine this will…
Druck in TPU, geringe Layerhöhe. Ansonsten sehr einfach zu drucken. Print in TPU, use a small layer height. Very easy to print. Do not forget to like, if You like!
Replica of original Rubik's cube stand ( 57x57mm) - Replika originálního stojanu Rubikovy kostky
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
Model of the 7.7x58mm Arisaka cartridge with bullet and casing in seperate files so you can print them in differnet colors. 1:1 scale within 0.01mm (sorry no freedom units here). Use superglue to conect the parts. Casing is made to be…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor Look…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor The…
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
I took Freddy's minimalist calendar and expanded it to a 7x5 grid to fit most months. The goal is here to keep the chain
This version has these improved features: hinge that snaps the box to and bottom together two box tops - one that prints as a single part and one that is stronger, but requires simple assembly ramped front catch text for multicolor ramped…
Slide box 7x5x2 cm Print settings 0,2mm layer 4 walls 15% infill no supports
Follow the same instructions from https://www.printables.com/es/@BC76, work pretty well. Thanks. I used 0.20 layer height @ 50% infil with PLA+ 4 walls 4 top and bottom layers With supports (below)
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in my Ammo Boxes Collection…
This will be superseded by a similar model in the https://www.printables.com/@brass_ring/collections/2345627 collection. The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab.…
This version has these improved features: ramped front catch text for multicolor ramped latch fixture for easier assembly ramped hinge fixture for easier assembly either Spring Latch or Snap Latch either square or round dividers Look in…
The Snap Latch snaps into a locked state when it is pressed towards the box front and it passes over a retaining tab. To open the box, pull the latch past the retaining tab and lift the box's lid. Look in my Ammo Boxes Collection…
This version has these improved features: text for multicolor ramped hinge fixture for easier assembly either square or round dividers Look in my Ammo Boxes Collection https://www.printables.com/social/261776-brass_ring/collections/167118…
These boxes have twice the print time of Single Spring Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/176715 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
These boxes have twice the print time of Double Snap Latch Ammo Boxes found here: https://www.printables.com/@brass_ring/collections/519398 Version 2 has these improved features: round cartridge holes recessed latch and hinges for…
![Powersupply Case [117x55x195]](https://media.printables.com/media/prints/356975/images/3025656_8f670894-5c56-4006-b3a2-645e2239365c/ee7b2283-2d24-4b40-96a6-a374836366c9.png)
