Counting matching models…
Die Deckel sitzen fest auf der Dose. Druckvorschlag: 20% Infill, 0,2 mm Layer. Stützen werden nicht benötigt. Facebook: 3D Druck für praktische und nützliche Dinge
08/2025: Updated 3D models for the screw and the center piece. The screw is now hollow! With this parts you can convert your empty Prusament spool to a Masterspool. I tested several other Prusament to Masterspool adaptors, but none of…
Lid for can of dog food BRIT 400g & 800g Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 20 Filament: Spectrum PETG Category: Pets
This fits on the headlamp body of F700GS and F800GS. If you installed aftermarket LED bulbs that has a heatsink in the back these caps extend to allow room for them. High beam and Low beam caps are different. The fit on the High beam is…
Attached is my interpretation of how the signal switch replacement. I lost mine over the night in January 2022. Determined, I designed out in maybe 3 hours with 4 iterations. I have been riding with this for over half a year, still not…
Stand rest BMW for F800GS 2015 Print instructions I made it on 15 quick print with 50-60% and PLA.
Kaychain for F800GS riders.
Description only in German, because these cans are only distributed here… Dankenswerterweise hat bredlmax ein sehr gutes Modell entworfen, sowohl von der Haptik als auch Design. Nur leider - es paßt nicht (wie alle anderen Modelle, die…
Bmw F800GS F900GS - KeyChain - Portachiavi - Porte Clès - 钥匙链 - llavero - Schlüsselanhänger Resize to adjust dimension If you download/enjoyed this file, please leave a like - Thx All trademarks, logos and brand names are the property of…
BOM: 1no. HP DPS-800GB Server Power Supply. (12V output) 1no. DC GND Isolated HP DPS-800GB Server Power Supply. (12V output) 8nos. 213mm x 12.8mm width x 2mm thk. Alum. bar. (support bar model.pdf) 16nos. m3 x 6 screw. 1no. DC 50A LCD…
These are caps for the 2008-2012 (pre-facelift) BMW F800GS, with enough room to fit LED headlamp bulbs with built-in heat sinks. I designed these because the other model floating around totally didn't fit my (2009 model year) bike, the…
You need to change the oil of your F800GS, but you dont have a funnel? Your funnel keeps and falling from the bike, and you are making a mess? This adapter solves both issues, on one side you cant attach it to a bottle of coke and on the…
This is a conversion of an HP DPS-800GB server power supply, into a benchtop supply with connectors more commonly used for electronics and electrical prototyping. It's designed to be relatively easy to make, and not least easier to…
EN: The funnel is designed to facilitate the filling of regenerated silicagel into the original 800-gram container with an opening of approx. 40mm diameter. It can be printed without the use of supports. CZ: Trychtýř je navržen pro…
I liked the redesign of the "Roller Spool Holder" and made one that is a bit narrower to save space and filament, and then a version for the 2kg spools. Im using 40mm pvc tube with the original design end-caps. Im not using any screws to…
AMPS Ram mount for BMW F800GS adventure. To mount your gps or any device that can be attached to an AMPS mount. Works on the 16mm F800GS adventure windshield bracket (or in any other 16mm Bar).
EN: The funnel is designed for original 800-gram “Traiva” silicagel container. No supports needed. CZ: Trychtýř je navržen pro originální 800-gramový silikagelový obal značky “Traiva”. Tisknout lze bez použití podpěr.
If you happen to have an BMW F800GS, as I do, and you lose the nut for your center stand, BMW charges you about 64€ for the replacement. Well, not in my house. When I lost mine, I replaced it with one made of ABS and over a year later,…
BMW F800GS keychain for GS riders.
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
Its a replacement for keyboard stand - Modecom MC-800G Volcano Original ones are pretty weak, this one is more flexible. Mine did not require any supports Category: Office
Cover for the rear fender of the F800GS I lost my rubber cover, and made this one to prevent mud under the seat Any questions, just ask me! :) Enjoy Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No…
A replacement for the front wheel of the mower. Designed to work with two 608ZZ (8x22x7 mm) bearings, I used an 8mm rod and two nuts as the axle. Two spacers will also be useful to prevent the wheel from slipping on the axle, I used two…
Mounting Brackets for DPS-800GB_a PSU My PSU's have been Float Modded so they can be placed in Serie for 24V if needed. Due to this I have had to replace de screws that holds the board in the case with Nylon ones. I added some Cap Nuts to…
Limits the space for 800g filament refills to the side for less risk of tangeling
This adapter enables you to use your old Prusament spools as a MasterSpool for 800g filament refills from Das Filament. The Refill sits tighter in the adapter than in the original MasterSpool. It is a sturdy and long lasting alternative…
-PETG -no support -any % infill 2022, MN
Conventional pet food gadgets only divide the food within the tin can. In high cans it is a big problem then to get the first portion out of the can. The dispenser provided here enables it to divide the wished amount of food and take it…
Um das Gewicht von ca. 800g zu erreichen wird der Ladeständer nach dem Drucken mit Sand gefüllt. > Aber Achtung der Sand muss TROCKEN sein. Gefahr von Schimmelbildung < Im Anschluss wird der kleine Runde Deckel eingeklebt und dann ist der…
can holder for clean organize space in your fridge
Simplify your hydroponic setup with our custom-designed Kratky lid for the 800g Taco Jar! Perfect for the Kratky method, this design makes it easy to create a stable and functional hydroponic growing system at home. The lid fits a 70mm…
to save your plastic for printing “usefull” things this Master spool uses flanges made from wood or any other substance avaliable in flat sheets. The flanges are screwed on using m3 screws(5mm+flange thicknes length) into heat set inserts…
Backplate for Lenovo K800G2 (RD452x) motherboard. To mount it, unscrew the bolts from the VGA and COM-port connectors, place the plate and then screw it in in place. The source .scad file is included.
Easy for print 2 walls 20% infill No supports, no brim
Fit a GPS, navigation, Map, Phone, token or picture of loved ones ? Tested to 160 km/h with the chigee aio-5 Only road tested for now. 800 km without any issues. Printed in ASA Geroid structure, with support structures. 20% infill…
Backplate for Lenovo K800G2 (RD452x) motherboard. To mount it, unscrew the bolts from the VGA and COM-port connectors, place the plate and then screw it in in place. The source .scad file is included.
MH-8800G/5 DYNAMIC UHF Microphones holder - Provide wall storage for 2 hand held microphones type MH-8800G/5 DYNAMIC UHF Microphones
A lid for dog food can with 100mm diameter. In my case it was "Dolina Noteci 800g". Printed with flex, but should work with PETG too. Snug fit prevents food from drying out and locks discussable smell of dog food inside the can :)
I made these to mount my TP-Link T2800G series switch to the vertical privacy shield under my desk. Use a number 8 wood screw to mount them to the desk
This is a simple spool holder for smaller spools such as Das Filament etc. I also added a bigger verison for 1kg spools.
Brake Pedal Extender for the BMW F800GS 15 mm wider Dual control 10 and 15 mm I recommend at least ASA, PCTG, or PETG filament.
The mowing robot in my garden has difficult working conditions ;) From time to time it smashes the blade discs on a root, curb or a stick, or simply breaks the blade from the socket. Instead of buying a new blade disc from NAC, below is a…
I designed a new, more solid front bumper. In this model, the front case likes to crack from constant impacts. Post-Printing Category: Outdoor & Garden
Material PET-G, infill 5%, modyficators infill 20%.
Customized version of https://www.thingiverse.com/thing:2011130 Created with Customizer! https://www.thingiverse.com/apps/customizer/run?thing\_id=2011130 Instructions Using the following options: number_of_drawers = 5 render_drawers = 1…
If you have a BMW F800GS and regularly ride with boots for off-road riding, you might not reach the brake pedal properly. This is a good solution: printed with TPU, it fits seamlessly. I've had it for about 2 years now, and it does its…
This is a remix of the lid of https://www.printables.com/de/model/576578-bambu-lab-ams-universal-spool-center-desiccant-hol from @NeedItMakeIt to fit Extrudr 800g spools, that are slightly thicker than Bambu spools. Please read the…
