Counting matching models…
Need the right profile fast? Just put it in a slicer, scale it as needed, and print! Included Profiles: 20x20 20x40 4H 20x40 30x30 40x40 40x80 80x80 These models are based on the MayTec® profile system. Update: I have designed some T-nut…
This model is compatible with the lego system.
Flexible cable management for xx80 profiles. 200mm, 100mm, and 50mm for varied run lengths. Mostly intended for simpits but anything that uses xx80 profile and has cables can benefit. Saw a few other models for different profile sizes…
Replacement part for Dillon XL650 Press. Reinforced with thicker walls. Locking lug for secure installation (insert & rotate to lock). Can be used as a temporary replacement for the genuine Delrin powder bar reset bushing, but probably…
This model is compatible with the lego system.
These are some extruded aluminum profiles I made to match the frame of the Anycubic Kobra 2 Max, but a bit thicker. I made the designs hollow, but with a thick enough perimeter that they are pretty strong as-is. My intent is to glue the…
808025 Axial Fan Holder for 3030 Frame Stepper Cooler RatRig V-Core 3 uses 2x M4 bolts and nuts & 3x M6x12 bolts and 3x T-nuts (you probably have some T-nuts and M6x12 bolts left from your V-Core 3 build anyway.) If you already used your…
Designed and printed this mainboard case for my own delta with the goal of keeping wires away from the stepper drivers, while also utilizing an 8080 Noctua Redux Fan for quiet, high-performance cooling. Assembly was performed with an…
This is a cover for the Realacc RX5808 Pro Plus module. Fits very snugly and covers completely around all the edges. Printed with nylon Taulman 910 alloy or PETG. Module snaps into the case/cover and then snaps into your goggles. I…
Bmw E30 - front seat belt bolt cap. OEM-number: 72 11 1 808 464 Reproduced with the dimensions of original part. Perfectly fits on its original place. Will fit on original stock seats, sportsitze, recaro. Some sanding (~220grit) and…
There are three types of Magicshine mounts included in this collection: 1) Handlebar mount, complete design, pinch-clamp 2) Handlebar mount, which uses a GoPro handlebar mount clamp 3) Helmet mount, which uses a GoPro helmet mount Note I…
Designed this model to fill some unused SFF-8088 receptacles to prevent dust from getting in them. Printed in TPU with 98A hardness. Fits perfectly
Love the new Tello drone - but wanted to give it a little more camera than what comes with it. Using this simple mount you can quickly clip an 1080p 808 Camera to it. I've posted the base clip for the Tello in case someone wants to…
Added T-nut, for easy installation on a simrig aluminium 8040/8080/4040 frame.
Housing build for Adafruit MCP9808 Temperature Sensor. With attached OpenSCAD file everything is customizable, especially size of screws to close and size of opening for connection cable. But can also easily adapted for other breakout…
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
Designed a camera case to mount on one leg the Ikea Lack Enclosure. You can tilt it left / right, up / down. You need: 2x M4x16 Srew 2x M4 Nut 4x M4 Washer 2x 5.0x20 Wood Screw or similar Suitable glue to stick on the hinge parts (i used…
You can put this on your cat's lead
Vidroc 808 Version 5 (V5) This is designed to allow you ‘strap on’ an 808 Key chain camera to your project. Mind you these cameras are starting to be harder to find but they're still one of the better options out there for this purpose.…
Hey, this is a simple holder for the Roco/Fleischmann 10764/680801 digital control unit that goes with the first generation Multimaus/Lokmaus. It can be mounted using for screws. Two holders are required for mounting.
This piece was designed for art macrophotography, the idea was to create a kind of truss system, but using cheap materials, so that's we came up with. The piece it's design for our Gslot aluminum profile, but if you like the idea, we will…
This is bracket for NVR board NBD7808R-PL. Thank to this bracket, NVR board can be easily installed to Mini-ITX case. Print instructions Rafts: No Supports: Yes Resolution: 0.3mm Infill: 40%
Onshape link https://cad.onshape.com/documents/d986d0824ff753d17a25984c/w/929a7c91fb0e235bbe76250e/e/1665391de84a7acd0c479203?renderMode=0&uiState=67a10c7157d0d17c554e06dc Uses a pair of M3 bolts & nuts
Camroc 808, a tribute! In 1966 Estes Industries offered the Camroc, the first commercially produced camera designed to be carried aloft by a model rocket. For most kids it was overly complicated to use and to get good results but the…
Gridfinity holder for Bahco 808050L
This is a gear made for the Sony Walkman WM-EX808, specifically Gear (K) with part number 3-365-755-01 According to this part number it should also fit on the EX66, EX77, EX88, EX60, EX70, EX707, FX70, FX77, FX707, and FX777. Since this…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
Light weight holder for HD Keychain Video camera #808 V16, including different fixing concepts (M3 screws or R/C servo horn). M3 fixing socket is provided to be glued into R/C model foam surface. Servo horn fixing allows 1 axis rotation…
This is a RCPROPLUS SupraX 6808 (6 mm bullet, S6 or D6) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
required some spare parts for the Tamiya Astute 58080... so I made a 3D Model. Got them professionally printed later but they also worked made with my Prusa Mini. There is one file close to the original geometry + one file with some…
Moving my files over from thing verse to here. I created some 3x3 inch endcaps for this specific extrusion that can be found on amazon here https://www.amazon.com/80-20-3030-LS-T-Slotted-Extrusion/dp/B00BQKXFIW one of the end caps uses…
Print in PETG with a new flange to reduce the entry of light Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20 Filament: Amazon Basic PETG Transparent Blue Category: R/C…
I wanted better skipping rope for my kids - lets be honest, i googled for the most expensive ones and took some inspiration from them, and designed ones i would like to use. Bill of materials: -2x handles -2x endcaps -2x M6x20mm bolts -2x…
I have a Prusa-Box Enclosure made by Printer Box which included a file for a thermometer/hygrometer mount. However, I planned to also have an Adafruit MCP9808 in the enclosure to link with the OctoPrint Enclosure Plugin. Here is a remix…
Endstop to designed for the Vevor Evolution 8080 CNC for use with M5 Screws included with the CNC. I used this for my Z axis limit switches. Printed in PLA. 35% Infill
Remixed from LaForge V2 Fatshark Doors by musicsurf, to fit the Quanum hb5808 diversity. Make sure to check the pictures for printing orientation and support structure. The snapping hooks are modified, as the original design would not fit…
v1 of the handle used for older Dewalt tool cases. Used a handle labled 380865 as the starting point. I do not know if these are still used with the current cases. This is super basic, no chamfers, etc. But for a tool case, it works. I…
I designed this enclosure for a RX5808 Pro Diversity custom PCB, oled screen, LM2596 buck regulator, and LM2940 ldo. The enclosure includes a T-nut insert for mounting to tripods. More info on the RX5808 Pro Diversity project and code for…
There are two versions, the only difference is the individual mm markings - on one they are proud/raised; on the other they are recessed. Choose whichever suits your printer (they are 0.1mm width so YMMV). Printed at 0.15mm for detail…
Housing for https://www.drone-fpv-racer.com/module-rx5808-pro-avec-firmware-pirx-20-4442.html or compatible fatshark modules. it's meant to be mounted on quanum google screen back.
The following 3D model depicts the architecture of a 8086 Microprocessor. Print with any materials that you want using the parameter suggested from filament producer. I suggest to use a 0.4mm nozzle.
Hallo! Hier wird ein Case für den FPV Diversity Empfänger HB5808 von Quanum angeboten. Es besteht aus mehreren Teilen da auch der Empfänger aus zwei Funkmodulen die über ein Kabel verbunden sind besteht.…
Schlüssel um die Düse im Milchsystem ein bzw. auszubauen. Druckdaten für FDM und SLA. Beispiele wurde mit FDM (Prusa MK3) und SLA (Anycubic) gedruckt. Einstellungen FDM: 0.4 er Düse 0.2 mm (0.15 mm) Schichthöhe Infill 50% Druckrichtung…
Don't let those audio waves go to waste! This silly gadget snaps on to your special omnidirectional computer speaker to redirect all those rad sound vibes in any direction you want. If you found this useful, it would bring me great joy to…
I decided to build a simple wood case for my Xi8088 build. Drafted and printed this simple model. Using small wood screws it anchors well to a piece of plywood. Holds the backplane down securely.
This model is compatible with the lego system.
This is a 3D-printable cover for book8088 palm rest. The original one was not a good fit because of a large height of the CPU socket. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 0.1…
This is a RX5808 Solderless Module Bay for RotorHazard BPill Board It is designed as a rig for testing RX5808 VRX modules, as used in RotorHazard and Delta5 race timers, as well as RX5808 diversity receivers. The rig holds little pogo…
Vidroc Swinger and Flippa After designing the Vidroc 808 BT-50 Nose Cone mount my friend Evan Curtis said "Hey this should swing down when recovering" and thus the 'Curtis Swing' was born. (but simply called "Swinger" here) Designed to…
808 Thump, a small cylindrical Bluetooth speaker that I've been using for a decade, great bass, wonderful tone, love it! But its hard to carry sometimes. for years I've had a bail made of baling wire electrical taped to it so I can hang…
Inspired by https://www.printables.com/model/1138586-accuweigh-kitchen-scale-holder-wall-mount
Was unable to find a commercial right angle connector but was able to bend the cabling with this support.
Hello, Sharing my project of fan protection cover, which I'm using for 8080 fan (Arctic Silent F8) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
This is a stand for the Hakko 808 desoldering gun. The base and support are separate in case you want to disassemble for storage or they can be glued together.
I like the original model a lot. I thought it could be a little better if some of the larger sections of plastic could be replaced with airspace. I'd liked the author's teardrop shape so I used it to make the airspace holes. Printed in…
required some spare parts for the Tamiya Astute 58080... so I made a 3D Model. Got them professionally printed later but they also worked made with my Prusa Mini. There is one file close to the original geometry + one file with some…
This is a Remix of an original Model by Wiseone. For a detailed description please see the original Model. The only change to the original model is an added cutout to be compatible with the Makita 644808-8 spare part as contacts instead…
lego 90195 30044 30046 30045 20309 60808 40066 35565 4218
Hello, Sharing my project of fan protection cover, which I'm using for 8080 fan (Arctic Silent F8) 🚀 Want to sell prints of my models? Subscribe to my Patreon for only $10/month and get the rights to use all my designs commercially!…
Lid for the Imsai 8080 computer (1976). Adapted for the repro kit (2023). Depth 40 cm, thickness 3 mm in 4 equal pieces. Gluing together required. Additional struts required in the interior. Printed with ABS and an increase of 0.7 percent…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
Before you go further! This model is available for free for all my supporters in Printables Club 🧡 Consider joining my club to have access to all ⭐⭐⭐ exclusive projects ⭐⭐⭐ and be part of my community! This project is for personal use…
This is an improved bay door for the realacc Rx5808 pro plus sold at Banggood.com. It is inspired from the great work done by @DonBowlissimo. Some minor changes for the module to fit better and fit snugly in the RX bay. Also the cut out…
Printed faced down (auto orient) Prints with supports as there is a small overhang. Small overhang, may not be needed for function, but may improve strength sligthly.
This is a RCPROPLUS SupraX 7808 (7 mm bullet, S7) Connector Protection Cap. It's designed to be printed out of TPU, and should not need supports to print, as the overhangs are all > 40 degrees.
Nice and simple holder for putting your little portable radio on an Ikea Skadis wall. Straightforward print, no supports needed. You will need two M2.5 Skadis T-Nut by @6d6178 and two M2.5 DIN912 screws for mounting the holder.
This model is compatible with the lego system.
Holes are 3.5mm diameter. I use #4 screws for wood. I spent a lot of time deciding which ratcheting screwdriver I wanted and this is the one I picked. So naturally it needed a proper home. If you have a bahco 808050 this holder will fit…
Modeled and printed this to replace a split drive gear in my Pet TurboEraser tool. I printed out of PET-G with a 0.2mm nozzle, at 0.1mm layer height.
tierradenadie's clever arm for a camera mount was just what I was looking for but I needed something for a little 808#16 camera so a slight mod was called for. I also modded the 808 caddy from https://www.thingiverse.com/thing:936354 to…
If you ever need to open your tilt-telescopic steering column, such as to install a new turn signal switch, you will find that this part has broken into half a dozen pieces. You can still find them on eBay and Amazon , but if you're like…
Case for 8086 Microprocessor Kit Designed for http://www.kswichit.com/8086/8086kit.htm . Print instructions Category: Electronics
Adj. Display Holder for DG-18080-11 Category: Electronics
XHDATA D-808 global radio minimalistic stand. Print part twice. Connect using two d=5mm, l=100mm screws. Edit: Added tubes to hide screws. One side has base of larger diameter (keeps print stick to bed) which needs to be removed after…
Case for the Raspberry Pi Zero (W model, other model works too) for using the 8086 Consultancy Solder-less Zero Dongle that can be found at https://www.8086.net/products v2 Update More space for ports LED hole Curved edges Closed down…
Keycam 808 mated to a Garmin Quarter Turn mount. I use it as a front camera for my bike. Merged two existing designs from HenningS and mcpdevelopment: https://www.thingiverse.com/thing:768611 https://www.thingiverse.com/thing:2666998…
I picked up a Realacc RX5808 Pro Plus OSD Receiver and needed a cover for my Eachine Ev200D goggles so I designed one. I printed it at 0.15mm layer height with support. Infill does not matter. The receiver will be a real tight fit if you…
Rather than having the sound go straight up out of the 808 Bluetooth speaker, this horn will help direct the sound in the direction that you would like. I've found that the bass seems to be amplified. Printed with supports and a brim.…
A simple adapter for all devices using 200x100 Vesa mount. In my case my new Philips 43pus8808 TV that i use as a PC Display. My Deskmount has an 100x100 form, so this adapter helps . Kept simple. Some things dont need to be complicated.
WHAT This is a collection of two modiffications of Vidroc 808 c by Works-of-Claye. --> https://www.thingiverse.com/thing:3714060 <-- The fist mod is "Vidroc 808 c 35mm.stl". This can be used to mount the Vidroc to a Klima 35mm tube. The…
Vidroc 808 c the c is for compact This is basically a trimmed down version of the Mini Cineroc , redesigned in Fusion 360 to be as small as possible for an 808 camera. I also made it look like a Falcon 9 Payload fairing. Offered in BT-50…
Vidroc 808 BT-50 and BT-60 Nose Cone This design makes it fairly simple to add an 808 Camera to your BT-50 or BT-60 based rocket. The BT-50 version It takes advantage of the narrow body of the 808 and records the flight 'sideways'. The…
Update an improved and more 'rugged' 808 Camera sled. Camera_Sled_v2.stl. Naturally, if you've already downloaded the full build, you only need to download this one part Mini Cineroc 808 Mike Dorffler designed for Estes Industries the…
I made this mount to work with the range of 808 cameras (that I have a few of). This makes a sturdy protective mount. Designed to be screwed directly onto the rocket using small tapered screws, there’s a curvature for most body tubes so I…
Gridfinity inlets for the full and stubby screwdriver. The small one is made to stack on top of the shaft for the big one. Nothing can be added on top op the handle of the big one. A bit of tight fit on the stubby one but it holds it in…
this is a remix. added lens protection to case Category: R/C Vehicles
![xhdata d-808 global radio minimalistic stand [Fusion 360 source]](https://media.printables.com/media/prints/222926/images/4393370_505dba00-3d6c-42fe-8739-3b06500cab99/hidden-screw.jpg)
