56 models
Replacement handle for router base from Porter Cable, Black and Decker, and DeWALT. Replaces part 908572 Print in the original orientation. No supports are needed. PETG or other high temp filament recommended with at least 3 perimeters…
Print approx. €4.09–€5.00 excl. taxPreliminary estimate for PETGSource material: PET
In addition to the commonly broken display hinges, I also had this latch break on an IBM P70 / model 8573 computer. As a result, the display would no longer stay latched closed. I measured the original part and created a rough replacement…
Print approx. €0.12–€0.14 excl. taxPreliminary estimate for one variant
I bolted the yaesu 857 faceplate bracket to this printed mount and it worked great. I've also add a file that has the standard 1" ram ball in case you opt to mount it with a ram mount system. Update March 2025: Updated file with a center…
Print approx. €2.14–€2.62 excl. taxPreliminary estimate for one variant
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
Print approx. €3.99–€4.87 excl. taxPreliminary estimate for PETGSource material: PET
Hi! This is my frame for bringing my FT-857D out portable. It's designed to attach to the radio via the 4x M4 screw holes for the mobile bracket, and provide a bit of protection for the radio. Main Features * Provides bump protection;…
Remix of @MM7VXJ's remix of SurfinBirdmans's rails for the Yaesu FT-857/FT-857D in Armoloq's style which adds: Expansion holes M4 nut-ready. You can attach whatever you want, You can use my optional connector with these connector pannels…
I added a new design to the existing box as a cable holder. I added a minimalistic handle to make the lid easier to use.
An adaptation of ‘SurfinBirdmans’ rails for the Yaesu-857 which adds a 5cm extension to the rear of the radio to provide more space for cable management, useful if being stored vertically in a backpack.
A beautiful round, swirled flower vase for decorative purposes to hold artificial flowers. It is 180mm tall and 116mm wide. The photo shows the vase printed in vase mode. It can be printed in vase mode or printed in normal mode with 0 top…
This model is compatible with the lego system.
Background As an active portable ham radio operator, I am always interested in evolving my gear to support a wide variety of ham radio activities. My primary rig for portable operations is the Yaesu FT-891 and with no internal soundcard…
18575 LEGO technic bevel gear with 20 teeth
Split and jigsaw notched Rails for Yaesu Ft-857 Radio
This is a Raspberry Pi 4 case that has been enlarged to accommodate a Geekworm / Suptronics SSD adapter board (tested on a X857 v2 board). There are two versions - a standalone case and another that can be attached to a UK power socket to…
This model is compatible with the lego system.
Please note that these models are untested and are based on replacement parts which I acquired. You may have to adjust this model to get it to work. A very common problem with used Yaesu FT-857D ham radios is that the Select knob is…
Designed with a snap-fit mechanism for secure mounting and easy removal. Assembly uses 2x M3 screws , with a center-to-center distance of 67mm between the mounting holes.
This model is compatible with the lego system.
This model is compatible with the lego system.
EN VW Golf - Polo - Passat AUDI A3 - A4 - A6 - Q3 -Q5 - TT Windscreen mirror wire protection - cover - cap 3C8857593B The provided .Step file allow you to modify the length of your cover to perfect fit to your car, as your broken part is.…
This model is compatible with the lego system.
When you're out in the field, the knobs and dials are often the most vulnerable parts of the radio. The POTA-Protector adds rugged side protection and a removable front cover to help prevent damage during transport and use. The front…
Yaesu FT-857 microphone holder for the Portable Zero side rails. Uses two 13mm x 3mm neodymium magnets held in with superglue. Print magnet side down. I have included integrated supports so no additional supports are needed. Optimized for…
I have added an extrusion on a triangle of each lid to act as a minimalistic handle so it is easier to open and close.
This is my teams own custom Odometry that I designed to fit our robot perfectly, so I included the step file so you can edit it to fit your robot should you wish to do so. I 3d printed these but if y'all want to laser cut it that's also…
A housing for the (WaveShare) PCF8574 I2C I/O board, stackable and with a fischertechnik compatible groove at the bottom. Category: Construction Toys
The original model was for a different DC/DC converter module. Therefore the model was modified to fit for a adjusting DC DC converter modul with voltage display. The closing of the case are also changed to sheet metal screws (tapping…
Printed in ABS, 0.4 Nozzle, 0.2 Layer, 20% infill.
The motor coupling on my washing machine failed. I found the rubber center section from this 285753 Motor Coupling for Whirlpool Direct Drive Top Load Washer by OnShape - Thingiverse and printed in TPU, but then discovered that the…
Printer brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2mm Infill: 100 Filament brand: Inland Filament material: PETG Notes: I always use a brim when printing.
Inline PTT for Yaesu FT‑891 This project describes how to build an inline Push‑to‑Talk (PTT) unit that integrates directly with a headset for field‑portable radio operation. The goal is to reduce the number of cables, adapters, and parts…
Bei meinem VW T4 Multivan war der Gurthalter durch das Hoch- und Runterklappen der hinteren Sitzbank verbogen. Ich konnte ihn auch nicht dauerhaft zurück biegen, deshalb habe ich ein neues Modell erstellt und gedruckt. Ich habe es schnell…
Habe hier ein Ersatzteil zum "einkleben" erstellt. OEM 323 857 083 Originaltext nach Ersatzteilkatalog : Blende für Schalter Fahrzeuge: Passat b2 - 32b - 33b - Santana
191857973 stl 191857974 stl
Having to insert this small board (I2C - 16 bit I/O expander) inside another device, I created this "flying" container to protect it, also because I did not have a place to fix it. The board does not need screws to be fixed and the cover…
Lego compatible TECHNIC 6M HALF BEAM (28570)
I made mine in TPU so the holder would have some give as the nozzles press on. Plastics should be okay too. And I used hot melt glue to secure it.
I wanted to put the FT857 head where my cell phone mount was.
great for those cases when you need to free your hands and at the same time the soldering dryer does not cool down Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament:…
VW Passat 32b Abdeckkappe für Haltegriff / Angstgriff OEM 321 857 621 /A passend für: Derby II Golf II + Syncro + Country Jetta II + Syncro Passat B2 / 32B + Syncro Polo II + Polo II F Rallye Golf Santana
This is a simple 3D Printed mount for the ADA4857 mount by Rene Wolf that allows you to stick it to the back of your VHS player. The mounting holes are designed for m3 heat inserts, and the back of it has space for 2x 8x3mm magnets to be…
VW Passat 32B Zwischenstück Angstgriff VAG Teilenummer: 321 857 615 BLH 1 / 2 / 3
Easy to print, functional rails for the Yaesu FT-857. Should fit the FT-891 as well. Print two Rears and two Dovetails for a set. Radio slides right into a bag.
Support solder air Quick 857DW+ Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 0.16 Infill: 25% Filament: НИТ PET-G Black Notes: Speed 50mm/s Category: Machine Tools
Merloni ( indesit ) refrigerator fridge freezer drain flap valve 14mm part number C00857077 I made it from TPU A95.
remix to accomandate AT-100 tuner
Upgraded your PC but keeping your trusty old case to save that hard-earned cash for more RAM? If you need a modern USB-C port on the front of your machine, this 3.5-inch drive bay adapter is exactly what you need. I specifically designed…
Suptronics Technologies x857 Case if you don't want to have a disk shared with the raspberry, but want to have it in a separate case.
If you have a broken latch, you just cut the rest of the lid, clean up and super glue. The trick is glueing it in the right spot, easiest to do that is to take the assembly out and finding the right spot while the lid is closed. Print…
When you're out in the field, the knobs and dials are often the most vulnerable parts of the radio. The POTA-Protector adds rugged side protection and a removable front cover to help prevent damage during transport and use. The front…
Rear bumper reflectors pair, 1974-75 Imperial, 1976-78 Chrysler New Yorker Bourgham. Mopar Part #3728 574 (3728574) #3728 573 (3728573). 9.6.2026: New design. Added LH part. Original designer: Chrysler Co., Detroit MI. No aftermarket part…
If you have a broken latch, you just cut the rest of the lid, clean up and super glue. The trick is glueing it in the right spot, easiest to do that is to take the assembly out and finding the right spot while the lid is closed. Print…
Print in TPU Modelled from measuring the actual part with calipers. Fits perfectly on the plastic trim pieces to locate and prevent interior creaks/rattles. Useful in places where the black cones are too long and make locating trims…
