Counting matching models…
Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…
Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…
I downloaded the original 8MP camera mount from the LightBurn site and redesigned to print a little better with less support and also designed an additional neck mount for my galvo laser engraver. The neck on my laser might be different…
Modified versions of the front and back covers of chri.kai.in's Angry CAM USB v2 for use with the IMX179 USB8MP05AF camera module.
3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj
remixed diyshifts raspicam/arducam mount for the larger 8mp version, added a little voron symbol, widened the hole for the larger lens, aswell as change the bracket mount to make the camera raised a bit, among other QOL addons NOTE: this…
A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.
This model is a remix (thank you to https://grabcad.com/lehaiver-1) . I adapted it to suit the 8 MP camera purchased on Aliexpress ( https://a.aliexpress.com/_EI7BHP3 ) of 38x38mm. The legs of this bracket are assembled with screws and…
A simple case for the DFRobot 8 Megapixels USB Camera, that i am currently using for my Octoprint webcam. You will need one small 2.5-3mm self tapping screw to mount the tab to the case. I o designed it to mount to any of the many…
A camera enclosure based on the thing by athos76 with some more or less modifications and adaptions to my needs. Actually it is drawn from scratch. Details are in the file. Made of 3mm acrylic, the knob is made of 10mm acrylic You also…
Camera mount for SONY IMX179 USB 8MP with 2.1mm lens http://s.click.aliexpress.com/e/6HCBgNw (32mmx32mm) Print file "cameraplaat.stl" twice, one for in the camera and the other to mount on the wanted surface. You can connect the plates…
This is case for Waveshare Sony IMX179 8MPx camera which is 38x38mm. For back case use 3mm threaded inserts and use 10-13mm M3 screws. I printed without supports, but inner part is ugly then, so I recommend supports on.
This is a remix of the Raspberry Pi Camera face cover from the Articulating Raspberry Pi Camera Mount for Prusa. This supports the Arducam drop-in wide angle replacement for the Raspberry Pi Camera v2. See:…
Waveshare camera 8MPx IMX179 cover. Printed in PETG, that camera chip is hot on the backside. Photos are from mine PRUSA MINI… I did this years ago, and do not exactly remember which model/author I take inspiration from (Thingiverse). I…
I needed an Adam Hall 8708 sized dish for my tops, but for NL8MPR connectors. I couldn't find any on the market, so here we are. There are two files: the single socket one has a 42 x 34 mm sticker zone, very slightly recessed. The sticker…
Da mir das kleine Digital-Mikroskop mit Tisch, Ständer und Bildschirm zu viel Platz auf meinem Löt-Arbeitsplatz weggenommen hat, habe ich mir dieses günstige Mikroskop Kit von Aliexpress besorgt (einen Monitor hatte ich sowieso am Tisch…
Yet another enclosure for the 8Mp LightBurn camera. Uses 6 pcs. 10x3mm neobdymium magnets to hold the cam in place. Camera is just held in place with a pair of adhesive foam-pads. Build-in cable-relief to protect the small connector from…
***Updated 11/8/24: added the connector arms (Arm_A and Arm_B) Update 5/1/24: added my modded 3 connectors for connecting everything together*** This is a remix is for THIS cam… https://www.amazon.com/gp/product/B01ER2SKFS?psc=1 I've…
The Waveshare IMX179 8MP USB Camera (B) module is prone to significant overheating, which becomes even more critical inside an enclosed printer chamber. To prevent thermal throttling or damage, I implemented this simple cooling upgrade. I…
this is a relatively simple model, print facedown with minimal supports. attaches to one side of the rack with plenty strength. unsure if it'll fit a 10inch rack.
This is a replacement PAN gear for the Anpviz 4k 8MP POE IP PTZ camera. I have tested it for model IPC-Z35805ES but it should also work with model IPC-Z35505ES I printed it out of ABS at 0.1 layer height. Infill is solid. The center hole…
Printing Parameters : - print at 0.2mm layer height to make some overhangs work properly - don't use supports Assembly : - insert 4 m3x4 heat inserts in the holes surrounding the fan inlet of the top half - insert 4 m3x4 heat inserts in…
You can use it to mount IMX179 8MP USB Camera (B) module to a board and adjust it horizontally. It is especially useful for mounting a camera for your printer when the printer is enclosed in a wardrobe. In order to maximize devices…
I went to mount my camera (replacing UBNT bullet-style cam) but found that it doesn't quite fit. Junction boxes were not readily available and were somewhat expensive so I created this. Full disclosure, I photographed the base that came…
